AMEManager Class¶

class NXOpen.AME.AMEManager¶

Bases: object

Represents a manager of automation designer objects

To obtain an instance of this class, refer to NXOpen.Session

New in version NX11.0.0.

Methods¶

Method	Description
ApplyNamingRule	Apply naming rule
ChangeDescription	Change the description of the node
ChangeEngineeringObjectDescription	Change the description of an Engineering Object
ChangeName	Change the name of the node
ChangeParent	Change the parent of a node in navigator
ClearClipboard	Clears clipboard
CloseAmeProject	Close AME project
ConfigureMemoryAreas	Creates memory areas and memory records for given product definition
ConnectToLibraryItemBuilder	Creates a connect to library item builder
CopyObjects	Copies objects on the clipboard
CreateAccessorEvaluatorBuilder	Creates a `NXOpen.AME.AccessorEvaluatorBuilder`
CreateAncestorEvaluatorBuilder	Creates a `NXOpen.AME.AncestorEvaluatorBuilder`
CreateApplicationBuilder	Creates a builder
CreateAspectNavigatorPreferencesBuilder	Creates a builder for the aspect navigator preferences dialog
CreateAspectPrefixBuilder	Creates a `NXOpen.AME.AspectPrefixBuilder`
CreateAssignAspectBuilder	Creates a `NXOpen.AME.AssignAspectBuilder`
CreateAssignSubnetBuilder	Creates a `NXOpen.AME.AssignSubnetBuilder`
CreateAssignTemplateToProductBuilder	Creates a `NXOpen.AME.AssignTemplateToProductBuilder`
CreateAssignTypeBuilder	Creates a `NXOpen.AME.AssignTypeBuilder`
CreateBreakTemplateBuilder	Creates a `NXOpen.AME.BreakTemplateBuilder`
CreateBulkConnectionBuilder	Creates a `NXOpen.AME.BulkConnectionBuilder`
CreateBulkEngineeringObjectBuilder	Creates a `NXOpen.AME.BulkEngineeringObjectBuilder`
CreateCabinetDesignBuilder	Creates a `NXOpen.AME.CabinetDesignBuilder`
CreateCallMethodRuleBuilder	Creates a `NXOpen.AME.CallMethodRuleBuilder`
CreateChildrenEvaluatorBuilder	Creates a `NXOpen.AME.ChildrenEvaluatorBuilder`
CreateConfigureResultTableBuilder	Creates a `NXOpen.AME.ConfigureResultTableBuilder`
CreateConnectedObjectsEvaluatorBuilder	Creates a `NXOpen.AME.ConnectedObjectsEvaluatorBuilder`
CreateDocumentStructureBuilder	Creates a `NXOpen.AME.DocumentStructureBuilder`
CreateEditAnnotationBuilder	Creates a `NXOpen.AME.EditAnnotationBuilder`
CreateEditClauseBuilder	Creates a `NXOpen.AME.EditClauseBuilder`
CreateEditEngineeringObjectBuilder	Creates a `NXOpen.AME.EditEngineeringObjectBuilder`
CreateEditOrderBuilder	Creates a `NXOpen.AME.EditOrderBuilder`
CreateEditQueryBuilder	Creates a `NXOpen.AME.EditQueryBuilder`
CreateEditQueryScopeBuilder	Creates a `NXOpen.AME.TCSavedQueriesBuilder`
CreateElectricalAnnotationSettingsBuilder	Creates a `NXOpen.AME.ElectricalAnnotationSettingsBuilder`
CreateElectricalConnectionSettingsBuilder	Creates a `NXOpen.AME.ElectricalConnectionSettingsBuilder`
CreateEngObjectDefinitionBuilder	Creates a `NXOpen.AME.CreateEngObjectDefinitionBuilder`
CreateEngineeringObjectAndMapLdObject	Create an eo and map it to a LD object
CreateEngineeringObjectBuilder	Creates a `NXOpen.AME.EngineeringObjectBuilder`
CreateEngineeringObjectDefinitionLabelBuilder	Creates a `NXOpen.AME.EngineeringObjectDefinitionLabelBuilder`
CreateEplanImportProjectTemplateBuilder	Creates a `NXOpen.AME.EplanImportProjectTemplateBuilder`
CreateEplanProjectGenerationBuilder	Creates a builder for the EPLAN project generation dialog
CreateEplanProjectTemplateAndStructureBuilder	Creates an EplanProjectTemplateAndStructureBuilder
CreateEplanSettingsBuilder	Creates an EplanSettingsBuilder
CreateEplanStructureIdentifierOrderBuilder	Creates a `NXOpen.AME.EplanStructureIdentifierOrderBuilder`
CreateEvaluatorCopyToBuilder	Creates a `NXOpen.AME.EvaluatorCopyToBuilder`
CreateExportEclassMappingBuilder	Creates a `NXOpen.AME.ExportEClassMappingBuilder`
CreateExtractAttributeBuilder	Creates an extract attribute builder
CreateFormSheetBuilder	Creates a `NXOpen.AME.FormSheetBuilder`
CreateFormSheetSettingsBuilder	Creates a `NXOpen.AME.FormSheetSettingsBuilder`
CreateFragmentBuilder	Creates a `NXOpen.AME.FragmentBuilder`
CreateFunctionCallInstanceBuilder	Creates an function call instance builder
CreateGeneralAnnotationSettingsBuilder	Creates a `NXOpen.AME.GeneralAnnotationSettingsBuilder`
CreateGeneralConnectionSettingsBuilder	Creates a `NXOpen.AME.GeneralConnectionSettingsBuilder`
CreateGenerateReportsBuilder	Creates a `NXOpen.AME.GenerateReportsBuilder`
CreateGlobalSelectionBuilder	Creates a global selection builder
CreateGroupBuilder	Creates a `NXOpen.AME.GroupBuilder`
CreateGroupFolder	Creates a `NXOpen.AME.AMEGroupFolder`
CreateImportEclassMappingBuilder	Creates a `NXOpen.AME.ImportEClassMappingBuilder`
CreateImportEclassProductBuilder	Creates a `NXOpen.AME.ImportEClassProductBuilder`
CreateImportEclassSchemaBuilder	Creates a `NXOpen.AME.ImportEClassSchemaBuilder`
CreateImportEplanPageMacroBuilder	Creates a `NXOpen.AME.ImportEplanPageMacroBuilder`
CreateImportGlobalMappingBuilder	Creates a `NXOpen.AME.ImportGlobalMappingBuilder`
CreateImportHwxmlBuilder	Creates an HWXml import builder
CreateInsertObjectBuilder	Creates a `NXOpen.AME.InsertObjectBuilder`
CreateInstanceDataBlockBuilder	Creates an instance data block builder
CreateInstantiateTemplateBulkBuilder	Creates a `NXOpen.AME.InstantiateTemplateBulkBuilder`
CreateInterruptionPointBuilder	Creates a `NXOpen.AME.InterruptionPointBuilder`
CreateLabel	Creates an Engineering Object Label
CreateLayoutDefinitionBuilder	Creates a `NXOpen.AME.LayoutDefinitionBuilder`
CreateLineDesignerMappingBuilder	Creates a `NXOpen.AME.LineDesignerMappingBuilder`
CreateLinkSymbolToDeviceTypeBuilder	Creates a `NXOpen.AME.LinkSymbolToDeviceTypeBuilder`
CreateLoadLineDesignerBuilder	Creates a `NXOpen.AME.LoadLineDesignerBuilder`
CreateManage2dSymbolsBuilder	Creates a `NXOpen.AME.Manage2dSymbolsBuilder`
CreateManage3dmodelsBuilder	Creates a `NXOpen.AME.Manage3DModelsBuilder`
CreateManageEclassmappingBuilder	Creates a `NXOpen.AME.ManageEclassMappingBuilder`
CreateManageObjectTypeBuilder	Creates a `NXOpen.AME.ManageObjectTypeBuilder`
CreateMapToExistingObjectBuilder	Creates a Map To Existing Builder
CreateMountingInterfaceBuilder	Creates a `NXOpen.AME.MountingInterfaceBuilder`
CreateNamingRuleSettingsBuilder	Creates a builder for the Set Naming Rules dialog
CreateObjectEvaluatorBuilder	Creates a `NXOpen.AME.ObjectEvaluatorBuilder`
CreateOperandRuleBuilder	Creates a `NXOpen.AME.OperandRuleBuilder`
CreateOperatorRuleBuilder	Creates a `NXOpen.AME.OperatorRuleBuilder`
CreateOpticalAnnotationSettingsBuilder	Creates a `NXOpen.AME.OpticalAnnotationSettingsBuilder`
CreateOpticalConnectionSettingsBuilder	Creates a `NXOpen.AME.OpticalConnectionSettingsBuilder`
CreateOrderAspectsBuilder	Creates a `NXOpen.AME.OrderAspectsBuilder`
CreatePageBuilder	Creates a `NXOpen.AME.PageBuilder`
CreatePageNamingBuilder	Creates a `NXOpen.AME.PageNamingBuilder`
CreateParameterRuleBuilder	Creates a `NXOpen.AME.ParameterRuleBuilder`
CreateParentEvaluatorBuilder	Creates a `NXOpen.AME.ParentEvaluatorBuilder`
CreatePlaceAutomationBuilder	Creates a `NXOpen.AME.PlaceAutomationBuilder`
CreatePlcMemoryAreaBuilder	Creates a `NXOpen.AME.PlcMemoryAreaBuilder`
CreatePlcMethodBuilder	Creates a `NXOpen.AME.PlcMethodBuilder`
CreatePlcRack	Creates a object of plc rack under provided station
CreatePlcStation	Creates a object of plc central station
CreatePlcSymbolBuilder	Creates a `NXOpen.AME.PlcSymbolBuilder`
CreatePlcSymbolsEvaluatorBuilder	Creates a `NXOpen.AME.PlcSymbolsEvaluatorBuilder`
CreatePlcVendorSymbolBuilder	Creates a `NXOpen.AME.PlcVendorSymbolBuilder`
CreatePmiNoteBuilder	Creates a `NXOpen.AME.CreatePmiNoteBuilder`
CreatePortBuilder	Creates a port builder
CreatePortConnectionBuilder	Creates a port builder
CreatePortEvaluatorBuilder	Creates a `NXOpen.AME.PortEvaluatorBuilder`
CreatePortsManagerBuilder	Creates a ports manager builder
CreateProductBuilder	Creates a `NXOpen.AME.CreateProductBuilder`
CreateProductMatchingRulesBuilder	Creates a `NXOpen.AME.ProductMatchingRulesBuilder`
CreateProductSelectionBuilder	Creates a `NXOpen.AME.ProductSelectionBuilder`
CreateProductSelectionDetailsBuilder	Creates a `NXOpen.AME.ProductSelectionDetailsBuilder`
CreateProjectEngineeringObjectBuilder	Creates a `NXOpen.AME.ProjectEngineeringObjectBuilder`
CreatePropertyEvaluatorBuilder	Creates a `NXOpen.AME.PropertyEvaluatorBuilder`
CreateQueryBuilder	Creates a `NXOpen.AME.QueryBuilder`
CreateQueryFolder	Creates a `NXOpen.AME.QueryFolder`
CreateReportTemplateBuilder	Creates a `NXOpen.AME.ReportTemplateBuilder`
CreateReportsSettingsBuilder	Creates a `NXOpen.AME.ReportsSettingsBuilder`
CreateSaveToLibraryBuilder	Creates a `NXOpen.AME.SaveToLibraryBuilder`
CreateSchematicSymbolConfigurationBuilder	Creates a `NXOpen.AME.SchematicSymbolConfigurationBuilder`
CreateShowHideObjectsBuilder	Create Show/Hide Objects Builder
CreateSnap3dmodelsBuilder	Creates a `NXOpen.AME.Snap3DModelsBuilder`
CreateSubnetBuilder	Creates a `NXOpen.AME.SubnetBuilder`
CreateSymbolAnnotationBuilder	Creates a `NXOpen.AME.SymbolAnnotationBuilder`
CreateSymbolAnnotationSettingsBuilder	Creates a `NXOpen.AME.SymbolAnnotationSettingsBuilder`
CreateSymbolAuthoringBuilder	Creates a `NXOpen.AME.SymbolAuthoringBuilder`
CreateTeeJunctionBuilder	Creates a `NXOpen.AME.TeeJunctionBuilder`
CreateTemplateBuilder	Creates a `NXOpen.AME.CreateTemplateBuilder`
CreateTemplateDefinitionBuilder	Creates a `NXOpen.AME.CreateTemplateDefinitionBuilder`
CreateTiaPortalProjectSettingsBuilder	Creates an TiaPortalSettingsBuilder
CreateTiaprojectItemBuilder	Creates a `NXOpen.AME.TiaProjectItemBuilder`
CreateTransferFileDataBuilder	Creates a `NXOpen.AME.TransferFileDataBuilder`
CreateTypeMappingListBuilder	Creates a `NXOpen.AME.TypeMappingListBuilder`
CreateUnloadLineDesignerBuilder	Creates a `NXOpen.AME.UnloadLineDesignerBuilder`
CreateUserConstants	Create plc user constants under provided node
CutObjects	Cuts objects and places them on the clipboard
DefineAspectBuilder	Creates a `NXOpen.AME.DefineAspectBuilder`
DeleteBrokenEoLinkToLdObject	Delete a Broken EO - LD Mapping Link
DeleteBrokenTemplateLinkToLdObject	Delete a Broken template - LD Mapping Link
DeleteEnd	End of the delete
DeleteLabel	Deletes an Engineering Object Label
DeleteObject	Delete the AME object
DeleteSingleAspect	Delete the AME aspect node object and the connected EO as well as all children in all aspects
DoDelete	Start to delete
DoDeleteWithUpdate	Start to delete with update
EditTarget	Set the target to be edited, target can be Type or Template, targetID is the DB id from the Teamcenter
EnterEclassEnv	Entering an eClass environment
EstablishChildren	Establish the children
ExportTiaProject	Exports tia to external tool
GetApplicationBuilder	Return the application builder
GetPartFilepath	Gets the file Path from full specification
HideShowLdObject	Hide/Show a LD object
LoadConnectedEos	Loads connected Engineering objects
LoadProductDefinition	Loads the Product Defintion
LockTemplate	Locks/unlocks the template
MakeInstanceDbGlobal	Change the instance data block to single / global instance
MakeMultipleInstanceDb	Change the instance data block to multiple instance
MapLdObject	Map a LD object to an eo
MapLdObjectToTemplate	Map a LD object to a template
MoveLabel	Moves an Engineering Object Label
MoveNavigatorNodes	Moves Navigator nodes under same parent
PasteObjects	Pastes objects from the clipboard under given parent
ReloadProject	Reload of project
RemoveFromGroup	Removes an engineering object from a group
ResetNaming	Apply naming rule
SelectAndHighlightBuilder	Creates a `NXOpen.AME.SelectAndHighlightBuilder`
SetDeleteConditionalObject	Set the delete option
SetHostName	Set the host name
SetObjectsToBeDeleted	Set the objects to be deleted
SubmitEngObjectDelete	Submit the delete of EOs
SubmitQueryObjectDelete	Submit the delete of Query Objects
UnassignPlcblock	Unassign the Plc Block to from a PLC
UnloadPart	Unloads a part even if modified
UnloadProject	Unload of template or definition project
UnmapLdObject	Unmap a LD object
UnmapTemplate	Unmap a template
UpdateAllNames	Update all the node’s name based on the naming rule
UpdateCollaborationContext	Updates the collaboration context
UpgradeMappingsRevision	Upgrade all the instance mappings of the project to the new loaded revision
ValidateForModification	Validate if object is modifiable

Enumerations¶

AMEManagerCreateStationType Enumeration	Type of PLC Station
AMEManagerDeleteType Enumeration	the deletion type
AMEManagerPasteStatus Enumeration	the status of paste operation

Method Detail¶

ApplyNamingRule¶

AMEManager.ApplyNamingRule¶

Apply naming rule

Signature ApplyNamingRule(obj)

Parameters:	obj (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ChangeDescription¶

AMEManager.ChangeDescription¶

Change the description of the node

Signature ChangeDescription(node, text)

Parameters:	node (`NXOpen.AME.AMEBaseNode`) – text (str) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ChangeEngineeringObjectDescription¶

AMEManager.ChangeEngineeringObjectDescription¶

Change the description of an Engineering Object

Signature ChangeEngineeringObjectDescription(eoTag, text)

Parameters:	eoTag (`NXOpen.AME.IEngObject`) – text (str) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ChangeName¶

AMEManager.ChangeName¶

Change the name of the node

Signature ChangeName(node, text)

Parameters:	node (`NXOpen.AME.AMEBaseNode`) – text (str) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ChangeParent¶

AMEManager.ChangeParent¶

Change the parent of a node in navigator

Signature ChangeParent(obj, newParent)

Parameters:	obj (`NXOpen.NXObject`) – newParent (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ClearClipboard¶

AMEManager.ClearClipboard¶

Clears clipboard

Signature ClearClipboard()

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CloseAmeProject¶

AMEManager.CloseAmeProject¶

Close AME project

Signature CloseAmeProject()

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ConfigureMemoryAreas¶

AMEManager.ConfigureMemoryAreas¶

Creates memory areas and memory records for given product definition

Signature ConfigureMemoryAreas(obj)

Parameters:	obj (`NXOpen.NXObject`) –
Returns:
Return type:	list of `NXOpen.AME.AMEBaseNode`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ConnectToLibraryItemBuilder¶

AMEManager.ConnectToLibraryItemBuilder¶

Creates a connect to library item builder

Signature ConnectToLibraryItemBuilder(part, imPort)

Parameters:	part (`NXOpen.Part`) – imPort (`NXOpen.AME.InterfaceMemberPort`) – node to edit may not be NULL
Returns:
Return type:	`NXOpen.AME.ConnectToLibraryItemBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CopyObjects¶

AMEManager.CopyObjects¶

Copies objects on the clipboard

Signature CopyObjects(objectsToCopy)

Parameters:	objectsToCopy (list of `NXOpen.AME.AMEBaseNode`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateAccessorEvaluatorBuilder¶

AMEManager.CreateAccessorEvaluatorBuilder¶

Creates a NXOpen.AME.AccessorEvaluatorBuilder

Signature CreateAccessorEvaluatorBuilder(part, accessorEvaluator)

Parameters:	part (`NXOpen.Part`) – accessorEvaluator (`NXOpen.AME.ExpressionEvaluator`) –
Returns:
Return type:	`NXOpen.AME.AccessorEvaluatorBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateAncestorEvaluatorBuilder¶

AMEManager.CreateAncestorEvaluatorBuilder¶

Creates a NXOpen.AME.AncestorEvaluatorBuilder

Signature CreateAncestorEvaluatorBuilder(part, ancestorEvaluator)

Parameters:	part (`NXOpen.Part`) – ancestorEvaluator (`NXOpen.AME.ExpressionEvaluator`) –
Returns:
Return type:	`NXOpen.AME.AncestorEvaluatorBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateApplicationBuilder¶

AMEManager.CreateApplicationBuilder¶

Creates a builder

Signature CreateApplicationBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ApplicationBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateAspectNavigatorPreferencesBuilder¶

AMEManager.CreateAspectNavigatorPreferencesBuilder¶

Creates a builder for the aspect navigator preferences dialog

Signature CreateAspectNavigatorPreferencesBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.AspectNavigatorPreferencesBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateAspectPrefixBuilder¶

AMEManager.CreateAspectPrefixBuilder¶

Creates a NXOpen.AME.AspectPrefixBuilder

Signature CreateAspectPrefixBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.AspectPrefixBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateAssignAspectBuilder¶

AMEManager.CreateAssignAspectBuilder¶

Creates a NXOpen.AME.AssignAspectBuilder

Signature CreateAssignAspectBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.AssignAspectBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateAssignSubnetBuilder¶

AMEManager.CreateAssignSubnetBuilder¶

Creates a NXOpen.AME.AssignSubnetBuilder

Signature CreateAssignSubnetBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.AssignSubnetBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateAssignTemplateToProductBuilder¶

AMEManager.CreateAssignTemplateToProductBuilder¶

Creates a NXOpen.AME.AssignTemplateToProductBuilder

Signature CreateAssignTemplateToProductBuilder(productDef)

Parameters:	productDef (`NXOpen.AME.ProductDefinition`) –
Returns:
Return type:	`NXOpen.AME.AssignTemplateToProductBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateAssignTypeBuilder¶

AMEManager.CreateAssignTypeBuilder¶

Creates a NXOpen.AME.AssignTypeBuilder

Signature CreateAssignTypeBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.AssignTypeBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateBreakTemplateBuilder¶

AMEManager.CreateBreakTemplateBuilder¶

Creates a NXOpen.AME.BreakTemplateBuilder

Signature CreateBreakTemplateBuilder(part, engObj)

Parameters:	part (`NXOpen.Part`) – engObj (`NXOpen.AME.AMEEngObject`) –
Returns:
Return type:	`NXOpen.AME.BreakTemplateBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateBulkConnectionBuilder¶

AMEManager.CreateBulkConnectionBuilder¶

Creates a NXOpen.AME.BulkConnectionBuilder

Signature CreateBulkConnectionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.BulkConnectionBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateBulkEngineeringObjectBuilder¶

AMEManager.CreateBulkEngineeringObjectBuilder¶

Creates a NXOpen.AME.BulkEngineeringObjectBuilder

Signature CreateBulkEngineeringObjectBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.BulkEngineeringObjectBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateCabinetDesignBuilder¶

AMEManager.CreateCabinetDesignBuilder¶

Creates a NXOpen.AME.CabinetDesignBuilder

Signature CreateCabinetDesignBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.CabinetDesignBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateCallMethodRuleBuilder¶

AMEManager.CreateCallMethodRuleBuilder¶

Creates a NXOpen.AME.CallMethodRuleBuilder

Signature CreateCallMethodRuleBuilder(part, editedRule, block, ruleType, refObjectType, replacementType, compileUnitIndex, startIndex, endIndex)

Parameters:	part (`NXOpen.Part`) – editedRule (`NXOpen.AME.PlcCodePosition`) – block (`NXOpen.AME.PlcBlock`) – ruleType (`NXOpen.AME.PlcRuleType`) – refObjectType (`NXOpen.AME.PlcRuleRefObjectType`) – replacementType (`NXOpen.AME.PlcRuleReplacementType`) – compileUnitIndex (int) – startIndex (int) – endIndex (int) –
Returns:
Return type:	`NXOpen.AME.CallMethodRuleBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateChildrenEvaluatorBuilder¶

AMEManager.CreateChildrenEvaluatorBuilder¶

Creates a NXOpen.AME.ChildrenEvaluatorBuilder

Signature CreateChildrenEvaluatorBuilder(part, childrenEvaluator)

Parameters:	part (`NXOpen.Part`) – childrenEvaluator (`NXOpen.AME.ExpressionEvaluator`) –
Returns:
Return type:	`NXOpen.AME.ChildrenEvaluatorBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateConfigureResultTableBuilder¶

AMEManager.CreateConfigureResultTableBuilder¶

Creates a NXOpen.AME.ConfigureResultTableBuilder

Signature CreateConfigureResultTableBuilder(queryObject)

Parameters:	queryObject (`NXOpen.AME.AMEQuery`) –
Returns:
Return type:	`NXOpen.AME.ConfigureResultTableBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateConnectedObjectsEvaluatorBuilder¶

AMEManager.CreateConnectedObjectsEvaluatorBuilder¶

Creates a NXOpen.AME.ConnectedObjectsEvaluatorBuilder

Signature CreateConnectedObjectsEvaluatorBuilder(part, connectedObjectsEvaluator)

Parameters:	part (`NXOpen.Part`) – connectedObjectsEvaluator (`NXOpen.AME.ExpressionEvaluator`) –
Returns:
Return type:	`NXOpen.AME.ConnectedObjectsEvaluatorBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateDocumentStructureBuilder¶

AMEManager.CreateDocumentStructureBuilder¶

Creates a NXOpen.AME.DocumentStructureBuilder

Signature CreateDocumentStructureBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.DocumentStructureBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEditAnnotationBuilder¶

AMEManager.CreateEditAnnotationBuilder¶

Creates a NXOpen.AME.EditAnnotationBuilder

Signature CreateEditAnnotationBuilder(part, extObject)

Parameters:	part (`NXOpen.Part`) – extObject (`NXOpen.AME.AMEExtendedObject`) –
Returns:
Return type:	`NXOpen.AME.EditAnnotationBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEditClauseBuilder¶

AMEManager.CreateEditClauseBuilder¶

Creates a NXOpen.AME.EditClauseBuilder

Signature CreateEditClauseBuilder(part, queryObject, queryClause)

Parameters:	part (`NXOpen.Part`) – queryObject (`NXOpen.AME.AMEQuery`) – queryClause (`NXOpen.AME.QueryClause`) –
Returns:
Return type:	`NXOpen.AME.EditClauseBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEditEngineeringObjectBuilder¶

AMEManager.CreateEditEngineeringObjectBuilder¶

Creates a NXOpen.AME.EditEngineeringObjectBuilder

Signature CreateEditEngineeringObjectBuilder(part, editObject)

Parameters:	part (`NXOpen.Part`) – editObject (`NXOpen.AME.AMEEngObject`) –
Returns:
Return type:	`NXOpen.AME.EditEngineeringObjectBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEditOrderBuilder¶

AMEManager.CreateEditOrderBuilder¶

Creates a NXOpen.AME.EditOrderBuilder

Signature CreateEditOrderBuilder(part, portContainer)

Parameters:	part (`NXOpen.Part`) – portContainer (`NXOpen.NXObject`) –
Returns:
Return type:	`NXOpen.AME.EditOrderBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEditQueryBuilder¶

AMEManager.CreateEditQueryBuilder¶

Creates a NXOpen.AME.EditQueryBuilder

Signature CreateEditQueryBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.EditQueryBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEditQueryScopeBuilder¶

AMEManager.CreateEditQueryScopeBuilder¶

Creates a NXOpen.AME.TCSavedQueriesBuilder

Signature CreateEditQueryScopeBuilder(part, queryObject, queryClause)

Parameters:	part (`NXOpen.Part`) – queryObject (`NXOpen.AME.AMEQuery`) – queryClause (`NXOpen.AME.QueryClause`) –
Returns:
Return type:	`NXOpen.AME.TCSavedQueriesBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateElectricalAnnotationSettingsBuilder¶

AMEManager.CreateElectricalAnnotationSettingsBuilder¶

Creates a NXOpen.AME.ElectricalAnnotationSettingsBuilder

Signature CreateElectricalAnnotationSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ElectricalAnnotationSettingsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateElectricalConnectionSettingsBuilder¶

AMEManager.CreateElectricalConnectionSettingsBuilder¶

Creates a NXOpen.AME.ElectricalConnectionSettingsBuilder

Signature CreateElectricalConnectionSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ElectricalConnectionSettingsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEngObjectDefinitionBuilder¶

AMEManager.CreateEngObjectDefinitionBuilder¶

Creates a NXOpen.AME.CreateEngObjectDefinitionBuilder

Signature CreateEngObjectDefinitionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.CreateEngObjectDefinitionBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEngineeringObjectAndMapLdObject¶

AMEManager.CreateEngineeringObjectAndMapLdObject¶

Create an eo and map it to a LD object

Signature CreateEngineeringObjectAndMapLdObject(ldObject)

Parameters:	ldObject (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEngineeringObjectBuilder¶

AMEManager.CreateEngineeringObjectBuilder¶

Creates a NXOpen.AME.EngineeringObjectBuilder

Signature CreateEngineeringObjectBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.EngineeringObjectBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEngineeringObjectDefinitionLabelBuilder¶

AMEManager.CreateEngineeringObjectDefinitionLabelBuilder¶

Creates a NXOpen.AME.EngineeringObjectDefinitionLabelBuilder

Signature CreateEngineeringObjectDefinitionLabelBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.EngineeringObjectDefinitionLabelBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEplanImportProjectTemplateBuilder¶

AMEManager.CreateEplanImportProjectTemplateBuilder¶

Creates a NXOpen.AME.EplanImportProjectTemplateBuilder

Signature CreateEplanImportProjectTemplateBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.EplanImportProjectTemplateBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEplanProjectGenerationBuilder¶

AMEManager.CreateEplanProjectGenerationBuilder¶

Creates a builder for the EPLAN project generation dialog

Signature CreateEplanProjectGenerationBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.EplanProjectGenerationBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEplanProjectTemplateAndStructureBuilder¶

AMEManager.CreateEplanProjectTemplateAndStructureBuilder¶

Creates an EplanProjectTemplateAndStructureBuilder

Signature CreateEplanProjectTemplateAndStructureBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.EplanProjectTemplateAndStructureBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEplanSettingsBuilder¶

AMEManager.CreateEplanSettingsBuilder¶

Creates an EplanSettingsBuilder

Signature CreateEplanSettingsBuilder(part, node)

Parameters:	part (`NXOpen.Part`) – node (`NXOpen.AME.AMEBaseNode`) – node to edit can be NULL
Returns:
Return type:	`NXOpen.AME.EplanSettingsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEplanStructureIdentifierOrderBuilder¶

AMEManager.CreateEplanStructureIdentifierOrderBuilder¶

Creates a NXOpen.AME.EplanStructureIdentifierOrderBuilder

Signature CreateEplanStructureIdentifierOrderBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.EplanStructureIdentifierOrderBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateEvaluatorCopyToBuilder¶

AMEManager.CreateEvaluatorCopyToBuilder¶

Creates a NXOpen.AME.EvaluatorCopyToBuilder

Signature CreateEvaluatorCopyToBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.EvaluatorCopyToBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateExportEclassMappingBuilder¶

AMEManager.CreateExportEclassMappingBuilder¶

Creates a NXOpen.AME.ExportEClassMappingBuilder

Signature CreateExportEclassMappingBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ExportEClassMappingBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateExtractAttributeBuilder¶

AMEManager.CreateExtractAttributeBuilder¶

Creates an extract attribute builder

Signature CreateExtractAttributeBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ExtractAttributeBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateFormSheetBuilder¶

AMEManager.CreateFormSheetBuilder¶

Creates a NXOpen.AME.FormSheetBuilder

Signature CreateFormSheetBuilder(part, formSheetObject)

Parameters:	part (`NXOpen.Part`) – formSheetObject (`NXOpen.AME.FormSheetObject`) –
Returns:
Return type:	`NXOpen.AME.FormSheetBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateFormSheetSettingsBuilder¶

AMEManager.CreateFormSheetSettingsBuilder¶

Creates a NXOpen.AME.FormSheetSettingsBuilder

Signature CreateFormSheetSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.FormSheetSettingsBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateFragmentBuilder¶

AMEManager.CreateFragmentBuilder¶

Creates a NXOpen.AME.FragmentBuilder

Signature CreateFragmentBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.FragmentBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateFunctionCallInstanceBuilder¶

AMEManager.CreateFunctionCallInstanceBuilder¶

Creates an function call instance builder

Signature CreateFunctionCallInstanceBuilder(part, node)

Parameters:	part (`NXOpen.Part`) – node (`NXOpen.AME.PlcBlock`) – node to edit can be not NULL
Returns:
Return type:	`NXOpen.AME.FunctionCallInstanceBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateGeneralAnnotationSettingsBuilder¶

AMEManager.CreateGeneralAnnotationSettingsBuilder¶

Creates a NXOpen.AME.GeneralAnnotationSettingsBuilder

Signature CreateGeneralAnnotationSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.GeneralAnnotationSettingsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateGeneralConnectionSettingsBuilder¶

AMEManager.CreateGeneralConnectionSettingsBuilder¶

Creates a NXOpen.AME.GeneralConnectionSettingsBuilder

Signature CreateGeneralConnectionSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.GeneralConnectionSettingsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateGenerateReportsBuilder¶

AMEManager.CreateGenerateReportsBuilder¶

Creates a NXOpen.AME.GenerateReportsBuilder

Signature CreateGenerateReportsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.GenerateReportsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateGlobalSelectionBuilder¶

AMEManager.CreateGlobalSelectionBuilder¶

Creates a global selection builder

Signature CreateGlobalSelectionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.GlobalSelectionBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateGroupBuilder¶

AMEManager.CreateGroupBuilder¶

Creates a NXOpen.AME.GroupBuilder

Signature CreateGroupBuilder(part, group)

Parameters:	part (`NXOpen.Part`) – group (`NXOpen.AME.AMEGroup`) –
Returns:
Return type:	`NXOpen.AME.GroupBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateGroupFolder¶

AMEManager.CreateGroupFolder¶

Creates a NXOpen.AME.AMEGroupFolder

Signature CreateGroupFolder(parentNode)

Parameters:	parentNode (`NXOpen.AME.AMEBaseNode`) –
Returns:
Return type:	`NXOpen.AME.AMEGroupFolder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateImportEclassMappingBuilder¶

AMEManager.CreateImportEclassMappingBuilder¶

Creates a NXOpen.AME.ImportEClassMappingBuilder

Signature CreateImportEclassMappingBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ImportEClassMappingBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateImportEclassProductBuilder¶

AMEManager.CreateImportEclassProductBuilder¶

Creates a NXOpen.AME.ImportEClassProductBuilder

Signature CreateImportEclassProductBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ImportEClassProductBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateImportEclassSchemaBuilder¶

AMEManager.CreateImportEclassSchemaBuilder¶

Creates a NXOpen.AME.ImportEClassSchemaBuilder

Signature CreateImportEclassSchemaBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ImportEClassSchemaBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateImportEplanPageMacroBuilder¶

AMEManager.CreateImportEplanPageMacroBuilder¶

Creates a NXOpen.AME.ImportEplanPageMacroBuilder

Signature CreateImportEplanPageMacroBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ImportEplanPageMacroBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateImportGlobalMappingBuilder¶

AMEManager.CreateImportGlobalMappingBuilder¶

Creates a NXOpen.AME.ImportGlobalMappingBuilder

Signature CreateImportGlobalMappingBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ImportGlobalMappingBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateImportHwxmlBuilder¶

AMEManager.CreateImportHwxmlBuilder¶

Creates an HWXml import builder

Signature CreateImportHwxmlBuilder(part, parentNode)

Parameters:	part (`NXOpen.Part`) – parentNode (`NXOpen.AME.AMEBaseNode`) –
Returns:
Return type:	`NXOpen.AME.ImportHWXmlBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateInsertObjectBuilder¶

AMEManager.CreateInsertObjectBuilder¶

Creates a NXOpen.AME.InsertObjectBuilder

Signature CreateInsertObjectBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.InsertObjectBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateInstanceDataBlockBuilder¶

AMEManager.CreateInstanceDataBlockBuilder¶

Creates an instance data block builder

Signature CreateInstanceDataBlockBuilder(part, node, mode)

Parameters:	part (`NXOpen.Part`) – node (`NXOpen.AME.PlcBlock`) – node to edit can be not NULL mode (`NXOpen.AME.InstanceDataBlockBuilderCreateMode`) – create idb from aspect or library
Returns:
Return type:	`NXOpen.AME.InstanceDataBlockBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateInstantiateTemplateBulkBuilder¶

AMEManager.CreateInstantiateTemplateBulkBuilder¶

Creates a NXOpen.AME.InstantiateTemplateBulkBuilder

Signature CreateInstantiateTemplateBulkBuilder(part, reusePartName)

Parameters:	part (`NXOpen.Part`) – reusePartName (str) –
Returns:
Return type:	`NXOpen.AME.InstantiateTemplateBulkBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateInterruptionPointBuilder¶

AMEManager.CreateInterruptionPointBuilder¶

Creates a NXOpen.AME.InterruptionPointBuilder

Signature CreateInterruptionPointBuilder(part, interruptionPoint)

Parameters:	part (`NXOpen.Part`) – interruptionPoint (`NXOpen.AME.AMEExtendedObject`) –
Returns:
Return type:	`NXOpen.AME.InterruptionPointBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateLabel¶

AMEManager.CreateLabel¶

Creates an Engineering Object Label

Signature CreateLabel(eo, targetPosition)

Parameters:	eo (`NXOpen.AME.AMEEngObject`) – targetPosition (`NXOpen.Point3d`) –
Returns:
Return type:	`NXOpen.AME.AMEEngineeringObjectLabel`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateLayoutDefinitionBuilder¶

AMEManager.CreateLayoutDefinitionBuilder¶

Creates a NXOpen.AME.LayoutDefinitionBuilder

Signature CreateLayoutDefinitionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.LayoutDefinitionBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateLineDesignerMappingBuilder¶

AMEManager.CreateLineDesignerMappingBuilder¶

Creates a NXOpen.AME.LineDesignerMappingBuilder

Signature CreateLineDesignerMappingBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.LineDesignerMappingBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateLinkSymbolToDeviceTypeBuilder¶

AMEManager.CreateLinkSymbolToDeviceTypeBuilder¶

Creates a NXOpen.AME.LinkSymbolToDeviceTypeBuilder

Signature CreateLinkSymbolToDeviceTypeBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.LinkSymbolToDeviceTypeBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateLoadLineDesignerBuilder¶

AMEManager.CreateLoadLineDesignerBuilder¶

Creates a NXOpen.AME.LoadLineDesignerBuilder

Signature CreateLoadLineDesignerBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.LoadLineDesignerBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateManage2dSymbolsBuilder¶

AMEManager.CreateManage2dSymbolsBuilder¶

Creates a NXOpen.AME.Manage2dSymbolsBuilder

Signature CreateManage2dSymbolsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.Manage2dSymbolsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateManage3dmodelsBuilder¶

AMEManager.CreateManage3dmodelsBuilder¶

Creates a NXOpen.AME.Manage3DModelsBuilder

Signature CreateManage3dmodelsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.Manage3DModelsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateManageEclassmappingBuilder¶

AMEManager.CreateManageEclassmappingBuilder¶

Creates a NXOpen.AME.ManageEclassMappingBuilder

Signature CreateManageEclassmappingBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ManageEclassMappingBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateManageObjectTypeBuilder¶

AMEManager.CreateManageObjectTypeBuilder¶

Creates a NXOpen.AME.ManageObjectTypeBuilder

Signature CreateManageObjectTypeBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ManageObjectTypeBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateMapToExistingObjectBuilder¶

AMEManager.CreateMapToExistingObjectBuilder¶

Creates a Map To Existing Builder

Signature CreateMapToExistingObjectBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.MapToExistingObjectBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateMountingInterfaceBuilder¶

AMEManager.CreateMountingInterfaceBuilder¶

Creates a NXOpen.AME.MountingInterfaceBuilder

Signature CreateMountingInterfaceBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.MountingInterfaceBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateNamingRuleSettingsBuilder¶

AMEManager.CreateNamingRuleSettingsBuilder¶

Creates a builder for the Set Naming Rules dialog

Signature CreateNamingRuleSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.NamingRuleSettingsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateObjectEvaluatorBuilder¶

AMEManager.CreateObjectEvaluatorBuilder¶

Creates a NXOpen.AME.ObjectEvaluatorBuilder

Signature CreateObjectEvaluatorBuilder(part, objectEvaluator)

Parameters:	part (`NXOpen.Part`) – objectEvaluator (`NXOpen.AME.ExpressionEvaluator`) –
Returns:
Return type:	`NXOpen.AME.ObjectEvaluatorBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateOperandRuleBuilder¶

AMEManager.CreateOperandRuleBuilder¶

Creates a NXOpen.AME.OperandRuleBuilder

Signature CreateOperandRuleBuilder(part, editedRule, block, indexOfCompileUnit, indexOfStatement, ruleType)

Parameters:	part (`NXOpen.Part`) – editedRule (`NXOpen.AME.PlcCodePosition`) – block (`NXOpen.AME.PlcBlock`) – indexOfCompileUnit (int) – indexOfStatement (int) – ruleType (`NXOpen.AME.PlcRuleType`) –
Returns:
Return type:	`NXOpen.AME.OperandRuleBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateOperatorRuleBuilder¶

AMEManager.CreateOperatorRuleBuilder¶

Creates a NXOpen.AME.OperatorRuleBuilder

Signature CreateOperatorRuleBuilder(part, editedRule, block, ruleType, refObjectType, replacementType, startIndex, endIndex, compileUnitIndex)

Parameters:	part (`NXOpen.Part`) – editedRule (`NXOpen.AME.PlcCodePosition`) – block (`NXOpen.AME.PlcBlock`) – ruleType (`NXOpen.AME.PlcRuleType`) – refObjectType (`NXOpen.AME.PlcRuleRefObjectType`) – replacementType (`NXOpen.AME.PlcRuleReplacementType`) – startIndex (int) – endIndex (int) – compileUnitIndex (int) –
Returns:
Return type:	`NXOpen.AME.OperatorRuleBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateOpticalAnnotationSettingsBuilder¶

AMEManager.CreateOpticalAnnotationSettingsBuilder¶

Creates a NXOpen.AME.OpticalAnnotationSettingsBuilder

Signature CreateOpticalAnnotationSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.OpticalAnnotationSettingsBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateOpticalConnectionSettingsBuilder¶

AMEManager.CreateOpticalConnectionSettingsBuilder¶

Creates a NXOpen.AME.OpticalConnectionSettingsBuilder

Signature CreateOpticalConnectionSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.OpticalConnectionSettingsBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateOrderAspectsBuilder¶

AMEManager.CreateOrderAspectsBuilder¶

Creates a NXOpen.AME.OrderAspectsBuilder

Signature CreateOrderAspectsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.OrderAspectsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePageBuilder¶

AMEManager.CreatePageBuilder¶

Creates a NXOpen.AME.PageBuilder

Signature CreatePageBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.PageBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePageNamingBuilder¶

AMEManager.CreatePageNamingBuilder¶

Creates a NXOpen.AME.PageNamingBuilder

Signature CreatePageNamingBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.PageNamingBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateParameterRuleBuilder¶

AMEManager.CreateParameterRuleBuilder¶

Creates a NXOpen.AME.ParameterRuleBuilder

Signature CreateParameterRuleBuilder(part, mvoPort, ruleType, usageType)

Parameters:	part (`NXOpen.Part`) – mvoPort (`NXOpen.AME.MultiValueObjectsPort`) – ruleType (`NXOpen.AME.PlcRuleType`) – usageType (`NXOpen.AME.MultiValueObjectsPortJaAmeValueObjectUsageType`) –
Returns:
Return type:	`NXOpen.AME.ParameterRuleBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateParentEvaluatorBuilder¶

AMEManager.CreateParentEvaluatorBuilder¶

Creates a NXOpen.AME.ParentEvaluatorBuilder

Signature CreateParentEvaluatorBuilder(part, parentEvaluator)

Parameters:	part (`NXOpen.Part`) – parentEvaluator (`NXOpen.AME.ExpressionEvaluator`) –
Returns:
Return type:	`NXOpen.AME.ParentEvaluatorBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePlaceAutomationBuilder¶

AMEManager.CreatePlaceAutomationBuilder¶

Creates a NXOpen.AME.PlaceAutomationBuilder

Signature CreatePlaceAutomationBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.PlaceAutomationBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePlcMemoryAreaBuilder¶

AMEManager.CreatePlcMemoryAreaBuilder¶

Creates a NXOpen.AME.PlcMemoryAreaBuilder

Signature CreatePlcMemoryAreaBuilder(part, memoryArea)

Parameters:	part (`NXOpen.Part`) – memoryArea (`NXOpen.AME.AMEBaseNode`) – node to edit can be NULL
Returns:
Return type:	`NXOpen.AME.PlcMemoryAreaBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePlcMethodBuilder¶

AMEManager.CreatePlcMethodBuilder¶

Creates a NXOpen.AME.PlcMethodBuilder

Signature CreatePlcMethodBuilder(part, method)

Parameters:	part (`NXOpen.Part`) – method (`NXOpen.AME.PlcMethod`) –
Returns:
Return type:	`NXOpen.AME.PlcMethodBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePlcRack¶

AMEManager.CreatePlcRack¶

Creates a object of plc rack under provided station

Signature CreatePlcRack(stationTag, text)

Parameters:	stationTag (`NXOpen.NXObject`) – text (str) –
Returns:
Return type:	`NXOpen.AME.AMEBaseNode`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePlcStation¶

AMEManager.CreatePlcStation¶

Creates a object of plc central station

Signature CreatePlcStation(text, stationType)

Parameters:	text (str) – stationType (`NXOpen.AME.AMEManagerCreateStationType`) –
Returns:
Return type:	list of `NXOpen.AME.AMEBaseNode`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePlcSymbolBuilder¶

AMEManager.CreatePlcSymbolBuilder¶

Creates a NXOpen.AME.PlcSymbolBuilder

Signature CreatePlcSymbolBuilder(part, node)

Parameters:	part (`NXOpen.Part`) – node (`NXOpen.AME.AMEBaseNode`) – node to edit can be NULL
Returns:
Return type:	`NXOpen.AME.PlcSymbolBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePlcSymbolsEvaluatorBuilder¶

AMEManager.CreatePlcSymbolsEvaluatorBuilder¶

Creates a NXOpen.AME.PlcSymbolsEvaluatorBuilder

Signature CreatePlcSymbolsEvaluatorBuilder(part, plcSymbolsEvaluator)

Parameters:	part (`NXOpen.Part`) – plcSymbolsEvaluator (`NXOpen.AME.ExpressionEvaluator`) –
Returns:
Return type:	`NXOpen.AME.PlcSymbolsEvaluatorBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePlcVendorSymbolBuilder¶

AMEManager.CreatePlcVendorSymbolBuilder¶

Creates a NXOpen.AME.PlcVendorSymbolBuilder

Signature CreatePlcVendorSymbolBuilder(part, memoryAreaTag)

Parameters:	part (`NXOpen.Part`) – memoryAreaTag (`NXOpen.NXObject`) –
Returns:
Return type:	`NXOpen.AME.PlcVendorSymbolBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePmiNoteBuilder¶

AMEManager.CreatePmiNoteBuilder¶

Creates a NXOpen.AME.CreatePmiNoteBuilder

Signature CreatePmiNoteBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.CreatePmiNoteBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePortBuilder¶

AMEManager.CreatePortBuilder¶

Creates a port builder

Signature CreatePortBuilder(part, parent, port)

Parameters:	part (`NXOpen.Part`) – parent (`NXOpen.NXObject`) – parent port (`NXOpen.NXObject`) – port to edit. Is NULL in create Mode
Returns:
Return type:	`NXOpen.AME.PortBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePortConnectionBuilder¶

AMEManager.CreatePortConnectionBuilder¶

Creates a port builder

Signature CreatePortConnectionBuilder(part, port)

Parameters:	part (`NXOpen.Part`) – port (`NXOpen.NXObject`) –
Returns:
Return type:	`NXOpen.AME.PortConnectionBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePortEvaluatorBuilder¶

AMEManager.CreatePortEvaluatorBuilder¶

Creates a NXOpen.AME.PortEvaluatorBuilder

Signature CreatePortEvaluatorBuilder(part, portEvaluator)

Parameters:	part (`NXOpen.Part`) – portEvaluator (`NXOpen.AME.ExpressionEvaluator`) –
Returns:
Return type:	`NXOpen.AME.PortEvaluatorBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePortsManagerBuilder¶

AMEManager.CreatePortsManagerBuilder¶

Creates a ports manager builder

Signature CreatePortsManagerBuilder(part, portsContainer)

Parameters:	part (`NXOpen.Part`) – portsContainer (`NXOpen.NXObject`) –
Returns:
Return type:	`NXOpen.AME.PortsManagerBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateProductBuilder¶

AMEManager.CreateProductBuilder¶

Creates a NXOpen.AME.CreateProductBuilder

Signature CreateProductBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.CreateProductBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateProductMatchingRulesBuilder¶

AMEManager.CreateProductMatchingRulesBuilder¶

Creates a NXOpen.AME.ProductMatchingRulesBuilder

Signature CreateProductMatchingRulesBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ProductMatchingRulesBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateProductSelectionBuilder¶

AMEManager.CreateProductSelectionBuilder¶

Creates a NXOpen.AME.ProductSelectionBuilder

Signature CreateProductSelectionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ProductSelectionBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateProductSelectionDetailsBuilder¶

AMEManager.CreateProductSelectionDetailsBuilder¶

Creates a NXOpen.AME.ProductSelectionDetailsBuilder

Signature CreateProductSelectionDetailsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ProductSelectionDetailsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateProjectEngineeringObjectBuilder¶

AMEManager.CreateProjectEngineeringObjectBuilder¶

Creates a NXOpen.AME.ProjectEngineeringObjectBuilder

Signature CreateProjectEngineeringObjectBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ProjectEngineeringObjectBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreatePropertyEvaluatorBuilder¶

AMEManager.CreatePropertyEvaluatorBuilder¶

Creates a NXOpen.AME.PropertyEvaluatorBuilder

Signature CreatePropertyEvaluatorBuilder(part, propertyEvaluator)

Parameters:	part (`NXOpen.Part`) – propertyEvaluator (`NXOpen.AME.ExpressionEvaluator`) –
Returns:
Return type:	`NXOpen.AME.PropertyEvaluatorBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateQueryBuilder¶

AMEManager.CreateQueryBuilder¶

Creates a NXOpen.AME.QueryBuilder

Signature CreateQueryBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.QueryBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateQueryFolder¶

AMEManager.CreateQueryFolder¶

Creates a NXOpen.AME.QueryFolder

Signature CreateQueryFolder(parentNode)

Parameters:	parentNode (`NXOpen.AME.AMEBaseNode`) –
Returns:
Return type:	`NXOpen.AME.QueryFolder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateReportTemplateBuilder¶

AMEManager.CreateReportTemplateBuilder¶

Creates a NXOpen.AME.ReportTemplateBuilder

Signature CreateReportTemplateBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ReportTemplateBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateReportsSettingsBuilder¶

AMEManager.CreateReportsSettingsBuilder¶

Creates a NXOpen.AME.ReportsSettingsBuilder

Signature CreateReportsSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ReportsSettingsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateSaveToLibraryBuilder¶

AMEManager.CreateSaveToLibraryBuilder¶

Creates a NXOpen.AME.SaveToLibraryBuilder

Signature CreateSaveToLibraryBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.SaveToLibraryBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateSchematicSymbolConfigurationBuilder¶

AMEManager.CreateSchematicSymbolConfigurationBuilder¶

Creates a NXOpen.AME.SchematicSymbolConfigurationBuilder

Signature CreateSchematicSymbolConfigurationBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.SchematicSymbolConfigurationBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateShowHideObjectsBuilder¶

AMEManager.CreateShowHideObjectsBuilder¶

Create Show/Hide Objects Builder

Signature CreateShowHideObjectsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.ShowHideObjectsBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateSnap3dmodelsBuilder¶

AMEManager.CreateSnap3dmodelsBuilder¶

Creates a NXOpen.AME.Snap3DModelsBuilder

Signature CreateSnap3dmodelsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.Snap3DModelsBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateSubnetBuilder¶

AMEManager.CreateSubnetBuilder¶

Creates a NXOpen.AME.SubnetBuilder

Signature CreateSubnetBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.SubnetBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateSymbolAnnotationBuilder¶

AMEManager.CreateSymbolAnnotationBuilder¶

Creates a NXOpen.AME.SymbolAnnotationBuilder

Signature CreateSymbolAnnotationBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.SymbolAnnotationBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateSymbolAnnotationSettingsBuilder¶

AMEManager.CreateSymbolAnnotationSettingsBuilder¶

Creates a NXOpen.AME.SymbolAnnotationSettingsBuilder

Signature CreateSymbolAnnotationSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.SymbolAnnotationSettingsBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateSymbolAuthoringBuilder¶

AMEManager.CreateSymbolAuthoringBuilder¶

Creates a NXOpen.AME.SymbolAuthoringBuilder

Signature CreateSymbolAuthoringBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.SymbolAuthoringBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateTeeJunctionBuilder¶

AMEManager.CreateTeeJunctionBuilder¶

Creates a NXOpen.AME.TeeJunctionBuilder

Signature CreateTeeJunctionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.TeeJunctionBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateTemplateBuilder¶

AMEManager.CreateTemplateBuilder¶

Creates a NXOpen.AME.CreateTemplateBuilder

Signature CreateTemplateBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.CreateTemplateBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateTemplateDefinitionBuilder¶

AMEManager.CreateTemplateDefinitionBuilder¶

Creates a NXOpen.AME.CreateTemplateDefinitionBuilder

Signature CreateTemplateDefinitionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.CreateTemplateDefinitionBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateTiaPortalProjectSettingsBuilder¶

AMEManager.CreateTiaPortalProjectSettingsBuilder¶

Creates an TiaPortalSettingsBuilder

Signature CreateTiaPortalProjectSettingsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.TiaPortalProjectSettingsBuilder`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateTiaprojectItemBuilder¶

AMEManager.CreateTiaprojectItemBuilder¶

Creates a NXOpen.AME.TiaProjectItemBuilder

Signature CreateTiaprojectItemBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.TiaProjectItemBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateTransferFileDataBuilder¶

AMEManager.CreateTransferFileDataBuilder¶

Creates a NXOpen.AME.TransferFileDataBuilder

Signature CreateTransferFileDataBuilder(part, importNodeTag)

Parameters:	part (`NXOpen.Part`) – importNodeTag (`NXOpen.AME.ImportNode`) –
Returns:
Return type:	`NXOpen.AME.TransferFileDataBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateTypeMappingListBuilder¶

AMEManager.CreateTypeMappingListBuilder¶

Creates a NXOpen.AME.TypeMappingListBuilder

Signature CreateTypeMappingListBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.TypeMappingListBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateUnloadLineDesignerBuilder¶

AMEManager.CreateUnloadLineDesignerBuilder¶

Creates a NXOpen.AME.UnloadLineDesignerBuilder

Signature CreateUnloadLineDesignerBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.UnloadLineDesignerBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CreateUserConstants¶

AMEManager.CreateUserConstants¶

Create plc user constants under provided node

Signature CreateUserConstants(parent)

Parameters:	parent (`NXOpen.AME.AMEBaseNode`) –
Returns:
Return type:	list of `NXOpen.AME.AMEBaseNode`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

CutObjects¶

AMEManager.CutObjects¶

Cuts objects and places them on the clipboard

Signature CutObjects(objectsToCut)

Parameters:	objectsToCut (list of `NXOpen.AME.AMEBaseNode`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

DefineAspectBuilder¶

AMEManager.DefineAspectBuilder¶

Creates a NXOpen.AME.DefineAspectBuilder

Signature DefineAspectBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.DefineAspectBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

DeleteBrokenEoLinkToLdObject¶

AMEManager.DeleteBrokenEoLinkToLdObject¶

Delete a Broken EO - LD Mapping Link

Signature DeleteBrokenEoLinkToLdObject(engObj)

Parameters:	engObj (`NXOpen.AME.IEngObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

DeleteBrokenTemplateLinkToLdObject¶

AMEManager.DeleteBrokenTemplateLinkToLdObject¶

Delete a Broken template - LD Mapping Link

Signature DeleteBrokenTemplateLinkToLdObject(tc)

Parameters:	tc (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

DeleteEnd¶

AMEManager.DeleteEnd¶

End of the delete

Signature DeleteEnd()

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

DeleteLabel¶

AMEManager.DeleteLabel¶

Deletes an Engineering Object Label

Signature DeleteLabel(label)

Parameters:	label (`NXOpen.AME.AMEEngineeringObjectLabel`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

DeleteObject¶

AMEManager.DeleteObject¶

Delete the AME object

Signature DeleteObject(obj)

Parameters:	obj (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

DeleteSingleAspect¶

AMEManager.DeleteSingleAspect¶

Delete the AME aspect node object and the connected EO as well as all children in all aspects

Signature DeleteSingleAspect(obj)

Parameters:	obj (`NXOpen.AME.AspectNode`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

DoDelete¶

AMEManager.DoDelete¶

Start to delete

Signature DoDelete()

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

DoDeleteWithUpdate¶

AMEManager.DoDeleteWithUpdate¶

Start to delete with update

Signature DoDeleteWithUpdate()

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

EditTarget¶

AMEManager.EditTarget¶

Set the target to be edited, target can be Type or Template, targetID is the DB id from the Teamcenter

Signature EditTarget(targetID)

Parameters:	targetID (str) –
Returns:
Return type:	`NXOpen.Part`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

EnterEclassEnv¶

AMEManager.EnterEclassEnv¶

Entering an eClass environment

Signature EnterEclassEnv()

Returns:
Return type:	`NXOpen.Part`

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

EstablishChildren¶

AMEManager.EstablishChildren¶

Establish the children

Signature EstablishChildren(parent)

Parameters:	parent (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ExportTiaProject¶

AMEManager.ExportTiaProject¶

Exports tia to external tool

Signature ExportTiaProject(selectedStations, fullPath, isExistingProject, openInTia, compileInTia, sendWithSwAndTags, sendWithDistributedIOs, ignoreConfigureError)

Parameters:	selectedStations (list of `NXOpen.AME.AMEBaseNode`) – fullPath (str) – isExistingProject (bool) – openInTia (bool) – compileInTia (bool) – sendWithSwAndTags (bool) – sendWithDistributedIOs (bool) – ignoreConfigureError (bool) –
Returns:
Return type:	str

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

GetApplicationBuilder¶

AMEManager.GetApplicationBuilder¶

Return the application builder

Signature GetApplicationBuilder()

Returns:
Return type:	`NXOpen.AME.ApplicationBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

GetPartFilepath¶

AMEManager.GetPartFilepath¶

Gets the file Path from full specification

Signature GetPartFilepath(reusePartName)

Parameters:	reusePartName (str) –
Returns:
Return type:	str

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

HideShowLdObject¶

AMEManager.HideShowLdObject¶

Hide/Show a LD object

Signature HideShowLdObject(ldObject, hide)

Parameters:	ldObject (`NXOpen.NXObject`) – hide (bool) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

LoadConnectedEos¶

AMEManager.LoadConnectedEos¶

Loads connected Engineering objects

Signature LoadConnectedEos(objects)

Parameters:	objects (list of `NXOpen.AME.IEngObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

LoadProductDefinition¶

AMEManager.LoadProductDefinition¶

Loads the Product Defintion

Signature LoadProductDefinition(reusePartName)

Parameters:	reusePartName (str) –
Returns:
Return type:	`NXOpen.AME.ProductDefinition`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

LockTemplate¶

AMEManager.LockTemplate¶

Locks/unlocks the template

Signature LockTemplate(lock)

Parameters:	lock (bool) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

MakeInstanceDbGlobal¶

AMEManager.MakeInstanceDbGlobal¶

Change the instance data block to single / global instance

Signature MakeInstanceDbGlobal(obj)

Parameters:	obj (`NXOpen.AME.PlcBlock`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

MakeMultipleInstanceDb¶

AMEManager.MakeMultipleInstanceDb¶

Change the instance data block to multiple instance

Signature MakeMultipleInstanceDb(obj)

Parameters:	obj (`NXOpen.AME.PlcBlock`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

MapLdObject¶

AMEManager.MapLdObject¶

Map a LD object to an eo

Signature MapLdObject(ldObject, eo)

Parameters:	ldObject (`NXOpen.NXObject`) – eo (`NXOpen.AME.IEngObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

MapLdObjectToTemplate¶

AMEManager.MapLdObjectToTemplate¶

Map a LD object to a template

Signature MapLdObjectToTemplate(ldObject, tc)

Parameters:	ldObject (`NXOpen.NXObject`) – tc (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

MoveLabel¶

AMEManager.MoveLabel¶

Moves an Engineering Object Label

Signature MoveLabel(label, targetPosition)

Parameters:	label (`NXOpen.AME.AMEEngineeringObjectLabel`) – targetPosition (`NXOpen.Point3d`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

MoveNavigatorNodes¶

AMEManager.MoveNavigatorNodes¶

Moves Navigator nodes under same parent

Signature MoveNavigatorNodes(after, nodesToMove)

Parameters:	after (`NXOpen.AME.AMEBaseNode`) – nodesToMove (list of `NXOpen.AME.AMEBaseNode`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

PasteObjects¶

AMEManager.PasteObjects¶

Pastes objects from the clipboard under given parent

Signature PasteObjects(parent)

Parameters:	parent (`NXOpen.AME.AMEBaseNode`) –
Returns:	a tuple
Return type:	A tuple consisting of (pasteStatus, newObjects). pasteStatus is a `NXOpen.AME.AMEManagerPasteStatus`. newObjects is a list of `NXOpen.AME.AMEBaseNode`.

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ReloadProject¶

AMEManager.ReloadProject¶

Reload of project

Signature ReloadProject(project)

Parameters:	project (`NXOpen.NXObject`) –

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

RemoveFromGroup¶

AMEManager.RemoveFromGroup¶

Removes an engineering object from a group

Signature RemoveFromGroup(group, eoTag)

Parameters:	group (`NXOpen.AME.AMEGroup`) – eoTag (`NXOpen.AME.IEngObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ResetNaming¶

AMEManager.ResetNaming¶

Apply naming rule

Signature ResetNaming(obj)

Parameters:	obj (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

SelectAndHighlightBuilder¶

AMEManager.SelectAndHighlightBuilder¶

Creates a NXOpen.AME.SelectAndHighlightBuilder

Signature SelectAndHighlightBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.AME.SelectAndHighlightBuilder`

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

SetDeleteConditionalObject¶

AMEManager.SetDeleteConditionalObject¶

Set the delete option

Signature SetDeleteConditionalObject(deleteOption)

Parameters:	deleteOption (bool) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

SetHostName¶

AMEManager.SetHostName¶

Set the host name

Signature SetHostName(hostName)

Parameters:	hostName (str) –

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

SetObjectsToBeDeleted¶

AMEManager.SetObjectsToBeDeleted¶

Set the objects to be deleted

Signature SetObjectsToBeDeleted(objects, deleteType)

Parameters:	objects (list of `NXOpen.NXObject`) – deleteType (`NXOpen.AME.AMEManagerDeleteType`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

SubmitEngObjectDelete¶

AMEManager.SubmitEngObjectDelete¶

Submit the delete of EOs

Signature SubmitEngObjectDelete()

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

SubmitQueryObjectDelete¶

AMEManager.SubmitQueryObjectDelete¶

Submit the delete of Query Objects

Signature SubmitQueryObjectDelete()

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

UnassignPlcblock¶

AMEManager.UnassignPlcblock¶

Unassign the Plc Block to from a PLC

Signature UnassignPlcblock(obj)

Parameters:	obj (`NXOpen.AME.PlcBlock`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

UnloadPart¶

AMEManager.UnloadPart¶

Unloads a part even if modified

Signature UnloadPart(partTag)

Parameters:	partTag (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

UnloadProject¶

AMEManager.UnloadProject¶

Unload of template or definition project

Signature UnloadProject(project)

Parameters:	project (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

UnmapLdObject¶

AMEManager.UnmapLdObject¶

Unmap a LD object

Signature UnmapLdObject(ldObject, keepTypeMapped)

Parameters:	ldObject (`NXOpen.NXObject`) – keepTypeMapped (bool) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

UnmapTemplate¶

AMEManager.UnmapTemplate¶

Unmap a template

Signature UnmapTemplate(templateId)

Parameters:	templateId (str) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

UpdateAllNames¶

AMEManager.UpdateAllNames¶

Update all the node’s name based on the naming rule

Signature UpdateAllNames()

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

UpdateCollaborationContext¶

AMEManager.UpdateCollaborationContext¶

Updates the collaboration context

Signature UpdateCollaborationContext()

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

UpgradeMappingsRevision¶

AMEManager.UpgradeMappingsRevision¶

Upgrade all the instance mappings of the project to the new loaded revision

Signature UpgradeMappingsRevision()

New in version NX12.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)

ValidateForModification¶

AMEManager.ValidateForModification¶

Validate if object is modifiable

Signature ValidateForModification(objectTag)

Parameters:	objectTag (`NXOpen.NXObject`) –

New in version NX11.0.0.

License requirements: ad_automation_design (“FULL AUTOMATION DESIGNER”)