BeamEADBuilder Class¶

class NXOpen.CAE.BeamEADBuilder¶

Bases: NXOpen.Builder

This class provides Beam/Bar Associated Data Support

To create a new instance of this class, use NXOpen.CAE.NodeElementManager.CreateBeamEadBuilder()

Default values.

Property	Value
EndReleaseAState	Ignore
EndReleaseBState	Ignore
OrientationState	Ignore
PhysicalPropertyTableState	Ignore

New in version NX6.0.0.

Properties¶

Property	Description
Elements	Returns the select element operator selects elements
EndOffsetA1	Returns the end A offset component 1 expression of the element
EndOffsetA2	Returns the end A offset component 2 expression of the element
EndOffsetA3	Returns the end A offset component 3 expression of the element
EndOffsetAState	Returns or sets the state drives the commit action
EndOffsetB1	Returns the end B offset component 1 expression of the element
EndOffsetB2	Returns the end B offset component 2 expression of the element
EndOffsetB3	Returns the end B offset component 3 expression of the element
EndOffsetBState	Returns or sets the state drives the commit action
EndReleaseA1	Returns or sets the get end release setting turns on or off the DOF 1 for end A
EndReleaseA2	Returns or sets the get end release setting turns on or off the DOF 2 for end A
EndReleaseA3	Returns or sets the get end release setting turns on or off the DOF 3 for end A
EndReleaseA4	Returns or sets the get end release setting turns on or off the DOF 4 for end A
EndReleaseA5	Returns or sets the get end release setting turns on or off the DOF 5 for end A
EndReleaseA6	Returns or sets the get end release setting turns on or off the DOF 6 for end A
EndReleaseAState	Returns or sets the method to get the state of end release A
EndReleaseB1	Returns or sets the get end release setting turns on or off the DOF 1 for end B
EndReleaseB2	Returns or sets the get end release setting turns on or off the DOF 2 for end B
EndReleaseB3	Returns or sets the get end release setting turns on or off the DOF 3 for end B
EndReleaseB4	Returns or sets the get end release setting turns on or off the DOF 4 for end B
EndReleaseB5	Returns or sets the get end release setting turns on or off the DOF 5 for end B
EndReleaseB6	Returns or sets the get end release setting turns on or off the DOF 6 for end B
EndReleaseBState	Returns or sets the method to get the state of end release B
Node	Returns the get node operator selects an orientation node
OriMethod	Returns or sets the method to get the element orientation method
OrientationState	Returns or sets the state drives the commit action
PhysicalPropertyTable	Returns or sets the physical property table of the beam element
PhysicalPropertyTableState	Returns or sets the physical property table state state drives the action upon commit
SelectSectionOri	Returns or sets the get selection ori operator gets section orientaion value
Tag	Returns the Tag for this object.
VectorChoice	Returns or sets the method to get the orientation vector choice

Methods¶

Method	Description
Commit	Commits any edits that have been applied to the builder.
Destroy	Deletes the builder, and cleans up any objects created by the builder.
GetCommittedObjects	For builders that create more than one object, this method returns the objects that are created by commit.
GetObject	Returns the object currently being edited by this builder.
ShowResults	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations¶

BeamEADBuilderEndReleaseSetting Enumeration	indicates which end release setting to use
BeamEADBuilderOrientationMethod Enumeration	indicates which orientation method to use
BeamEADBuilderState Enumeration	indicates to ignore, apply or clear the state property upon commit
BeamEADBuilderVectorChoiceType Enumeration	indicates which vector choice to use

Property Detail¶

Elements¶

BeamEADBuilder.Elements¶

Returns the select element operator selects elements

-------------------------------------

Getter Method

Signature Elements

Returns:
Return type:	`NXOpen.CAE.SelectElementsBuilder`

New in version NX6.0.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndOffsetA1¶

BeamEADBuilder.EndOffsetA1¶

Returns the end A offset component 1 expression of the element

-------------------------------------

Getter Method

Signature EndOffsetA1

Returns:
Return type:	`NXOpen.Expression`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndOffsetA2¶

BeamEADBuilder.EndOffsetA2¶

Returns the end A offset component 2 expression of the element

-------------------------------------

Getter Method

Signature EndOffsetA2

Returns:
Return type:	`NXOpen.Expression`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndOffsetA3¶

BeamEADBuilder.EndOffsetA3¶

Returns the end A offset component 3 expression of the element

-------------------------------------

Getter Method

Signature EndOffsetA3

Returns:
Return type:	`NXOpen.Expression`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndOffsetAState¶

BeamEADBuilder.EndOffsetAState¶

Returns or sets the state drives the commit action

-------------------------------------

Getter Method

Signature EndOffsetAState

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderState`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndOffsetAState

Parameters:	endOffsetAState (`NXOpen.CAE.BeamEADBuilderState`) –

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndOffsetB1¶

BeamEADBuilder.EndOffsetB1¶

Returns the end B offset component 1 expression of the element

-------------------------------------

Getter Method

Signature EndOffsetB1

Returns:
Return type:	`NXOpen.Expression`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndOffsetB2¶

BeamEADBuilder.EndOffsetB2¶

Returns the end B offset component 2 expression of the element

-------------------------------------

Getter Method

Signature EndOffsetB2

Returns:
Return type:	`NXOpen.Expression`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndOffsetB3¶

BeamEADBuilder.EndOffsetB3¶

Returns the end B offset component 3 expression of the element

-------------------------------------

Getter Method

Signature EndOffsetB3

Returns:
Return type:	`NXOpen.Expression`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndOffsetBState¶

BeamEADBuilder.EndOffsetBState¶

Returns or sets the state drives the commit action

-------------------------------------

Getter Method

Signature EndOffsetBState

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderState`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndOffsetBState

Parameters:	endOffsetBState (`NXOpen.CAE.BeamEADBuilderState`) –

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseA1¶

BeamEADBuilder.EndReleaseA1¶

Returns or sets the get end release setting turns on or off the DOF 1 for end A

-------------------------------------

Getter Method

Signature EndReleaseA1

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseA1

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseA2¶

BeamEADBuilder.EndReleaseA2¶

Returns or sets the get end release setting turns on or off the DOF 2 for end A

-------------------------------------

Getter Method

Signature EndReleaseA2

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseA2

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseA3¶

BeamEADBuilder.EndReleaseA3¶

Returns or sets the get end release setting turns on or off the DOF 3 for end A

-------------------------------------

Getter Method

Signature EndReleaseA3

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseA3

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseA4¶

BeamEADBuilder.EndReleaseA4¶

Returns or sets the get end release setting turns on or off the DOF 4 for end A

-------------------------------------

Getter Method

Signature EndReleaseA4

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseA4

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseA5¶

BeamEADBuilder.EndReleaseA5¶

Returns or sets the get end release setting turns on or off the DOF 5 for end A

-------------------------------------

Getter Method

Signature EndReleaseA5

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseA5

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseA6¶

BeamEADBuilder.EndReleaseA6¶

Returns or sets the get end release setting turns on or off the DOF 6 for end A

-------------------------------------

Getter Method

Signature EndReleaseA6

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseA6

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseAState¶

BeamEADBuilder.EndReleaseAState¶

Returns or sets the method to get the state of end release A

-------------------------------------

Getter Method

Signature EndReleaseAState

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderState`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseAState

Parameters:	endReleaseAState (`NXOpen.CAE.BeamEADBuilderState`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseB1¶

BeamEADBuilder.EndReleaseB1¶

Returns or sets the get end release setting turns on or off the DOF 1 for end B

-------------------------------------

Getter Method

Signature EndReleaseB1

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseB1

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseB2¶

BeamEADBuilder.EndReleaseB2¶

Returns or sets the get end release setting turns on or off the DOF 2 for end B

-------------------------------------

Getter Method

Signature EndReleaseB2

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseB2

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseB3¶

BeamEADBuilder.EndReleaseB3¶

Returns or sets the get end release setting turns on or off the DOF 3 for end B

-------------------------------------

Getter Method

Signature EndReleaseB3

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseB3

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseB4¶

BeamEADBuilder.EndReleaseB4¶

Returns or sets the get end release setting turns on or off the DOF 4 for end B

-------------------------------------

Getter Method

Signature EndReleaseB4

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseB4

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseB5¶

BeamEADBuilder.EndReleaseB5¶

Returns or sets the get end release setting turns on or off the DOF 5 for end B

-------------------------------------

Getter Method

Signature EndReleaseB5

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseB5

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseB6¶

BeamEADBuilder.EndReleaseB6¶

Returns or sets the get end release setting turns on or off the DOF 6 for end B

-------------------------------------

Getter Method

Signature EndReleaseB6

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseB6

Parameters:	endReleaseSetting (`NXOpen.CAE.BeamEADBuilderEndReleaseSetting`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

EndReleaseBState¶

BeamEADBuilder.EndReleaseBState¶

Returns or sets the method to get the state of end release B

-------------------------------------

Getter Method

Signature EndReleaseBState

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderState`

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature EndReleaseBState

Parameters:	endReleaseBState (`NXOpen.CAE.BeamEADBuilderState`) –

New in version NX6.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

Node¶

BeamEADBuilder.Node¶

Returns the get node operator selects an orientation node

-------------------------------------

Getter Method

Signature Node

Returns:
Return type:	`NXOpen.CAE.SelectFENodeList`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

OriMethod¶

BeamEADBuilder.OriMethod¶

Returns or sets the method to get the element orientation method

-------------------------------------

Getter Method

Signature OriMethod

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderOrientationMethod`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature OriMethod

Parameters:	oriMethod (`NXOpen.CAE.BeamEADBuilderOrientationMethod`) –

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

OrientationState¶

BeamEADBuilder.OrientationState¶

Returns or sets the state drives the commit action

-------------------------------------

Getter Method

Signature OrientationState

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderState`

New in version NX6.0.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature OrientationState

Parameters:	orientationState (`NXOpen.CAE.BeamEADBuilderState`) –

New in version NX6.0.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

PhysicalPropertyTable¶

BeamEADBuilder.PhysicalPropertyTable¶

Returns or sets the physical property table of the beam element

-------------------------------------

Getter Method

Signature PhysicalPropertyTable

Returns:
Return type:	`NXOpen.CAE.PhysicalPropertyTable`

New in version NX11.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature PhysicalPropertyTable

Parameters:	physicalPropertyTable (`NXOpen.CAE.PhysicalPropertyTable`) –

New in version NX11.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

PhysicalPropertyTableState¶

BeamEADBuilder.PhysicalPropertyTableState¶

Returns or sets the physical property table state state drives the action upon commit

-------------------------------------

Getter Method

Signature PhysicalPropertyTableState

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderState`

New in version NX11.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature PhysicalPropertyTableState

Parameters:	physicalPropertyTableState (`NXOpen.CAE.BeamEADBuilderState`) –

New in version NX11.0.1.

License requirements: nx_masterfem (“Finite Element Modeling”)

SelectSectionOri¶

BeamEADBuilder.SelectSectionOri¶

Returns or sets the get selection ori operator gets section orientaion value

-------------------------------------

Getter Method

Signature SelectSectionOri

Returns:
Return type:	`NXOpen.Direction`

New in version NX6.0.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature SelectSectionOri

Parameters:	selectSectionOri (`NXOpen.Direction`) –

New in version NX6.0.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

VectorChoice¶

BeamEADBuilder.VectorChoice¶

Returns or sets the method to get the orientation vector choice

-------------------------------------

Getter Method

Signature VectorChoice

Returns:
Return type:	`NXOpen.CAE.BeamEADBuilderVectorChoiceType`

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

-------------------------------------

Setter Method

Signature VectorChoice

Parameters:	vectorChoice (`NXOpen.CAE.BeamEADBuilderVectorChoiceType`) –

New in version NX7.5.0.

License requirements: nx_masterfem (“Finite Element Modeling”)

Method Detail¶

Validate¶

BeamEADBuilder.Validate¶

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:	Was self validation successful
Return type:	bool

New in version NX3.0.1.

License requirements: None.

BeamEADBuilder Class¶

Properties¶

Methods¶

Enumerations¶

Property Detail¶

Elements¶

EndOffsetA1¶

EndOffsetA2¶

EndOffsetA3¶

EndOffsetAState¶

EndOffsetB1¶

EndOffsetB2¶

EndOffsetB3¶

EndOffsetBState¶

EndReleaseA1¶

EndReleaseA2¶

EndReleaseA3¶

EndReleaseA4¶

EndReleaseA5¶

EndReleaseA6¶

EndReleaseAState¶

EndReleaseB1¶

EndReleaseB2¶

EndReleaseB3¶

EndReleaseB4¶

EndReleaseB5¶

EndReleaseB6¶

EndReleaseBState¶

Node¶

OriMethod¶

OrientationState¶

PhysicalPropertyTable¶

PhysicalPropertyTableState¶

SelectSectionOri¶

VectorChoice¶

Method Detail¶

Validate¶

NXOpen Python API Reference

Navigation

Related Topics