FeedsBuilder Class¶

class NXOpen.CAM.FeedsBuilder¶

Bases: NXOpen.TaggedObject

Represents a feeds Builder

New in version NX5.0.0.

Properties¶

Property	Description
CutGasPressure	Returns the Cut Gas Pressure
CutGasType	Returns the Cut Gas Type
CutLaserDelay	Returns the Laser Cut Delay
CutLaserFrequency	Returns the Laser Cut Frequency
CutLaserPower	Returns the Laser Cut Power
FeedApproachBuilder	Returns the feed_approach builder (inheritable Feed)
FeedCrossoverBuilder	Returns the feed_crossover builder (inheritable Feed)
FeedCutBuilder	Returns the feed_cut builder (inheritable Feed)
FeedDepartureBuilder	Returns the feed_departure builder (inheritable Feed)
FeedEngageBuilder	Returns the feed_engage builder (inheritable Feed)
FeedFirstCutBuilder	Returns the feed_first_cut builder (inheritable Feed)
FeedLastCutBuilder	Returns the feed_last_cut builder (inheritable Feed)
FeedPerToothBuilder	Returns the feed_per_tooth builder (inheritable Double)
FeedRapidBuilder	Returns the feed_rapid builder (inheritable Feed)
FeedRapidOutput	Returns the feed rapid output builder (inheritable Enum)
FeedRetractBuilder	Returns the feed_retract builder (inheritable Feed)
FeedReturnBuilder	Returns the feed_return builder (inheritable Feed)
FeedSideCutBuilder	Returns the feed_side_cut builder (inheritable Feed)
FeedStepoverBuilder	Returns the feed_stepover builder (inheritable Feed)
FeedTraversalBuilder	Returns the feed_traversal builder (inheritable Feed)
FeedsOptimizationData	Returns the feeds optimize data
OptimizeFeedRateWhenGenerating	Returns or sets the optimize feed rate when generating
PierceGasPressure	Returns the Pierce Gas Pressure
PierceGasType	Returns the Pierce Gas Type
PierceLaserDelay	Returns the Laser Pierce Delay
PierceLaserFrequency	Returns the Laser Pierce Frequency
PierceLaserPower	Returns the Laser Pierce Power
RetractSpeed	Returns the Retract Speed
RetractSpeedToggle	Returns or sets the Retract Speed Toggle
SpindleModeBuilder	Returns the spindle_mode builder (inheritable Int)
SpindleRangeBuilder	Returns the spindle_range builder (inheritable Text)
SpindleRpmBuilder	Returns the spindle_rpm builder (inheritable Double)
SpindleRpmToggle	Returns or sets the spindle_rpm_toggle
SpindleTextBuilder	Returns the spindle_text builder (inheritable Text)
SurfaceSpeedBuilder	Returns the surface_speed builder (inheritable Double)
Tag	Returns the Tag for this object.
ToolDirectionBuilder	Returns the tool_direction builder (inheritable Int)

Methods¶

Method	Description
RecalculateData	Recalculate speeds and feeds
SetMachiningData	Set machining data

Enumerations¶

FeedsBuilderRecalcuateBasedOn Enumeration

The recalculation based on attribute

Property Detail¶

CutGasPressure¶

FeedsBuilder.CutGasPressure¶

Returns the Cut Gas Pressure

-------------------------------------

Getter Method

Signature CutGasPressure

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

CutGasType¶

FeedsBuilder.CutGasType¶

Returns the Cut Gas Type

-------------------------------------

Getter Method

Signature CutGasType

Returns:
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

CutLaserDelay¶

FeedsBuilder.CutLaserDelay¶

Returns the Laser Cut Delay

-------------------------------------

Getter Method

Signature CutLaserDelay

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

CutLaserFrequency¶

FeedsBuilder.CutLaserFrequency¶

Returns the Laser Cut Frequency

-------------------------------------

Getter Method

Signature CutLaserFrequency

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

CutLaserPower¶

FeedsBuilder.CutLaserPower¶

Returns the Laser Cut Power

-------------------------------------

Getter Method

Signature CutLaserPower

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

FeedApproachBuilder¶

FeedsBuilder.FeedApproachBuilder¶

Returns the feed_approach builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedApproachBuilder

Returns:	the feed_approach builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedCrossoverBuilder¶

FeedsBuilder.FeedCrossoverBuilder¶

Returns the feed_crossover builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedCrossoverBuilder

Returns:	the feed_crossover builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX10.0.3.

License requirements: cam_base (“CAM BASE”)

FeedCutBuilder¶

FeedsBuilder.FeedCutBuilder¶

Returns the feed_cut builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedCutBuilder

Returns:	the feed_cut builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedDepartureBuilder¶

FeedsBuilder.FeedDepartureBuilder¶

Returns the feed_departure builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedDepartureBuilder

Returns:	the feed_departure builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedEngageBuilder¶

FeedsBuilder.FeedEngageBuilder¶

Returns the feed_engage builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedEngageBuilder

Returns:	the feed_engage builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedFirstCutBuilder¶

FeedsBuilder.FeedFirstCutBuilder¶

Returns the feed_first_cut builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedFirstCutBuilder

Returns:	the feed_first_cut builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedLastCutBuilder¶

FeedsBuilder.FeedLastCutBuilder¶

Returns the feed_last_cut builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedLastCutBuilder

Returns:	the feed_last_cut builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX9.0.3.

License requirements: cam_base (“CAM BASE”)

FeedPerToothBuilder¶

FeedsBuilder.FeedPerToothBuilder¶

Returns the feed_per_tooth builder (inheritable Double)

-------------------------------------

Getter Method

Signature FeedPerToothBuilder

Returns:	the feed_per_tooth builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedRapidBuilder¶

FeedsBuilder.FeedRapidBuilder¶

Returns the feed_rapid builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedRapidBuilder

Returns:	the feed_rapid builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedRapidOutput¶

FeedsBuilder.FeedRapidOutput¶

Returns the feed rapid output builder (inheritable Enum)

-------------------------------------

Getter Method

Signature FeedRapidOutput

Returns:	the feed rapid output builder
Return type:	`NXOpen.CAM.InheritableFeedModeBuilder`

New in version NX8.0.0.

License requirements: cam_base (“CAM BASE”)

FeedRetractBuilder¶

FeedsBuilder.FeedRetractBuilder¶

Returns the feed_retract builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedRetractBuilder

Returns:	the feed_retract builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedReturnBuilder¶

FeedsBuilder.FeedReturnBuilder¶

Returns the feed_return builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedReturnBuilder

Returns:	the feed_return builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedSideCutBuilder¶

FeedsBuilder.FeedSideCutBuilder¶

Returns the feed_side_cut builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedSideCutBuilder

Returns:	the feed_side_cut builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedStepoverBuilder¶

FeedsBuilder.FeedStepoverBuilder¶

Returns the feed_stepover builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedStepoverBuilder

Returns:	the feed_stepover builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedTraversalBuilder¶

FeedsBuilder.FeedTraversalBuilder¶

Returns the feed_traversal builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedTraversalBuilder

Returns:	the feed_traversal builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedsOptimizationData¶

FeedsBuilder.FeedsOptimizationData¶

Returns the feeds optimize data

-------------------------------------

Getter Method

Signature FeedsOptimizationData

Returns:	the feeds optimization data
Return type:	`NXOpen.CAM.FeedsOptimizationData`

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

OptimizeFeedRateWhenGenerating¶

FeedsBuilder.OptimizeFeedRateWhenGenerating¶

Returns or sets the optimize feed rate when generating

-------------------------------------

Getter Method

Signature OptimizeFeedRateWhenGenerating

Returns:
Return type:	bool

New in version NX7.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature OptimizeFeedRateWhenGenerating

Parameters:	isOptimize (bool) –

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

PierceGasPressure¶

FeedsBuilder.PierceGasPressure¶

Returns the Pierce Gas Pressure

-------------------------------------

Getter Method

Signature PierceGasPressure

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

PierceGasType¶

FeedsBuilder.PierceGasType¶

Returns the Pierce Gas Type

-------------------------------------

Getter Method

Signature PierceGasType

Returns:
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

PierceLaserDelay¶

FeedsBuilder.PierceLaserDelay¶

Returns the Laser Pierce Delay

-------------------------------------

Getter Method

Signature PierceLaserDelay

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

PierceLaserFrequency¶

FeedsBuilder.PierceLaserFrequency¶

Returns the Laser Pierce Frequency

-------------------------------------

Getter Method

Signature PierceLaserFrequency

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

PierceLaserPower¶

FeedsBuilder.PierceLaserPower¶

Returns the Laser Pierce Power

-------------------------------------

Getter Method

Signature PierceLaserPower

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

RetractSpeed¶

FeedsBuilder.RetractSpeed¶

Returns the Retract Speed

-------------------------------------

Getter Method

Signature RetractSpeed

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

RetractSpeedToggle¶

FeedsBuilder.RetractSpeedToggle¶

Returns or sets the Retract Speed Toggle

-------------------------------------

Getter Method

Signature RetractSpeedToggle

Returns:	the retract spindle toggle status
Return type:	int

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RetractSpeedToggle

Parameters:	status (int) – the retract spindle toggle status

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleModeBuilder¶

FeedsBuilder.SpindleModeBuilder¶

Returns the spindle_mode builder (inheritable Int)

-------------------------------------

Getter Method

Signature SpindleModeBuilder

Returns:	the spindle_mode builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleRangeBuilder¶

FeedsBuilder.SpindleRangeBuilder¶

Returns the spindle_range builder (inheritable Text)

-------------------------------------

Getter Method

Signature SpindleRangeBuilder

Returns:	the spindle_range builder
Return type:	`NXOpen.CAM.InheritableTextBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleRpmBuilder¶

FeedsBuilder.SpindleRpmBuilder¶

Returns the spindle_rpm builder (inheritable Double)

-------------------------------------

Getter Method

Signature SpindleRpmBuilder

Returns:	the spindle_rpm builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleRpmToggle¶

FeedsBuilder.SpindleRpmToggle¶

Returns or sets the spindle_rpm_toggle

-------------------------------------

Getter Method

Signature SpindleRpmToggle

Returns:	the spindle rpm toggle status
Return type:	int

New in version NX7.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SpindleRpmToggle

Parameters:	status (int) – the spindle rpm toggle status

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

SpindleTextBuilder¶

FeedsBuilder.SpindleTextBuilder¶

Returns the spindle_text builder (inheritable Text)

-------------------------------------

Getter Method

Signature SpindleTextBuilder

Returns:	the spindle_text builder
Return type:	`NXOpen.CAM.InheritableTextBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SurfaceSpeedBuilder¶

FeedsBuilder.SurfaceSpeedBuilder¶

Returns the surface_speed builder (inheritable Double)

-------------------------------------

Getter Method

Signature SurfaceSpeedBuilder

Returns:	the surface_speed builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

ToolDirectionBuilder¶

FeedsBuilder.ToolDirectionBuilder¶

Returns the tool_direction builder (inheritable Int)

-------------------------------------

Getter Method

Signature ToolDirectionBuilder

Returns:	the tool_direction builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

Method Detail¶

RecalculateData¶

FeedsBuilder.RecalculateData¶

Recalculate speeds and feeds

Signature RecalculateData(type)

Parameters:	type (`NXOpen.CAM.FeedsBuilderRecalcuateBasedOn`) – the recalculation based on attribute

New in version NX8.0.0.

License requirements: cam_base (“CAM BASE”)

SetMachiningData¶

FeedsBuilder.SetMachiningData¶

Set machining data

Signature SetMachiningData()

New in version NX6.0.0.

License requirements: cam_base (“CAM BASE”)