FeedsTurnBuilder Class¶

class NXOpen.CAM.FeedsTurnBuilder¶

Bases: NXOpen.TaggedObject

Represents a turning feeds Builder

New in version NX5.0.0.

Properties¶

Property	Description
ChamferFeed	Returns the chamfer feed builder (inheritable Feed)
EngageSpindleSpeedBuilder	Returns the engage spindle speed builder (inheritable Double)
EngageSpindleSpeedToggleBuilder	Returns the engage spindle speed toggle builder (inheritable Int)
FeedApproachBuilder	Returns the feed_approach builder (inheritable Feed)
FeedCutBuilder	Returns the feed_cut builder (inheritable Feed)
FeedDepartureBuilder	Returns the feed_departure builder (inheritable Feed)
FeedEngageBuilder	Returns the feed_engage builder (inheritable Feed)
FeedFirstCutBuilder	Returns the feed_first_cut builder (inheritable Feed)
FeedMaxApproachLengthBuilder	Returns the feed_max_approach_length builder (inheritable Double)
FeedMaxApproachLengthFlagBuilder	Returns the feed_max_approach_length_flag builder (inheritable Int)
FeedMinAccelerateDecelerateLengthBuilder	Returns the feed_min_accelerate_decelerate_length builder (inheritable Double)
FeedMinAccelerateDecelerateLengthFlagBuilder	Returns the feed_min_accelerate_decelerate_length_flag builder (inheritable Int)
FeedPerToothBuilder	Returns the feed_per_tooth builder (inheritable Double)
FeedRapidBuilder	Returns the feed_rapid builder (inheritable Feed)
FeedRapidOutput	Returns the feed rapid output builder (inheritable Enum)
FeedRetractBuilder	Returns the feed_retract builder (inheritable Feed)
FeedReturnBuilder	Returns the feed_return builder (inheritable Feed)
FeedSideCutBuilder	Returns the feed_side_cut builder (inheritable Feed)
FeedStepoverBuilder	Returns the feed_stepover builder (inheritable Feed)
FeedTraversalBuilder	Returns the feed_traversal builder (inheritable Feed)
FeedrateAccelerateBuilder	Returns the feedrate_accelerate builder (inheritable Feed)
FeedrateAccelerateLengthBuilder	Returns the feedrate_accelerate_length builder (inheritable Feed)
FeedrateCircCcwBuilder	Returns the feedrate_circ_ccw builder (inheritable Feed)
FeedrateCircCwBuilder	Returns the feedrate_circ_cw builder (inheritable Feed)
FeedrateCleanupCircCcwBuilder	Returns the feedrate_cleanup_circ_ccw builder (inheritable Feed)
FeedrateCleanupCircCwBuilder	Returns the feedrate_cleanup_circ_cw builder (inheritable Feed)
FeedrateCleanupCutBuilder	Returns the feedrate_cleanup_cut builder (inheritable Feed)
FeedrateCleanupDiameterBuilder	Returns the feedrate_cleanup_diameter builder (inheritable Feed)
FeedrateCleanupFaceBuilder	Returns the feedrate_cleanup_face builder (inheritable Feed)
FeedrateCleanupLinearBuilder	Returns the feedrate_cleanup_linear builder (inheritable Feed)
FeedrateClearBuilder	Returns the feedrate_clear builder (inheritable Feed)
FeedrateDecelerateBuilder	Returns the feedrate_decelerate builder (inheritable Feed)
FeedrateDecelerateLengthBuilder	Returns the feedrate_decelerate_length builder (inheritable Feed)
FeedrateDiameterBuilder	Returns the feedrate_diameter builder (inheritable Feed)
FeedrateFaceBuilder	Returns the feedrate_face builder (inheritable Feed)
FeedrateFinishAccelerateBuilder	Returns the feedrate_finish_accelerate builder (inheritable Feed)
FeedrateFinishAccelerateLengthBuilder	Returns the feedrate_finish_accelerate_length builder (inheritable Feed)
FeedrateFinishDecelerateBuilder	Returns the feedrate_finish_decelerate builder (inheritable Feed)
FeedrateFinishDecelerateLengthBuilder	Returns the feedrate_finish_decelerate_length builder (inheritable Feed)
FeedrateFinishRampInBuilder	Returns the feedrate_finish_ramp_in builder (inheritable Feed)
FeedrateFinishRampLevelBuilder	Returns the feedrate_finish_ramp_level builder (inheritable Feed)
FeedrateFinishRampOutBuilder	Returns the feedrate_finish_ramp_out builder (inheritable Feed)
FeedrateLinearBuilder	Returns the feedrate_linear builder (inheritable Feed)
FeedrateProfileCutBuilder	Returns the feedrate_profile_cut builder (inheritable Feed)
FeedrateRampInBuilder	Returns the feedrate_ramp_in builder (inheritable Feed)
FeedrateRampLevelBuilder	Returns the feedrate_ramp_level builder (inheritable Feed)
FeedrateRampOutBuilder	Returns the feedrate_ramp_out builder (inheritable Feed)
FeedrateRoughLastCutBuilder	Returns the feedrate_rough_last_cut builder (inheritable Feed)
FeedrateRoughLastCutForEntirePassTogBuilder	Returns the feedrate_rough_last_cut_for_entire_pass_tog builder (inheritable Int)
RoundFeed	Returns the round feed builder (inheritable Feed)
SpindleDirectionAutomaticBuilder	Returns the spindle_direction_automatic builder (inheritable Int)
SpindleDirectionBuilder	Returns the spindle direction builder (inheritable Int)
SpindleMaximumRpmBuilder	Returns the spindle_maximum_rpm builder (inheritable Double)
SpindleModeBuilder	Returns the spindle_mode builder (inheritable Int)
SpindlePresetRpmBuilder	Returns the spindle_preset_rpm builder (inheritable Double)
SpindlePresetRpmToggleBuilder	Returns the spindle_preset_rpm_toggle builder (inheritable Int)
SpindleRangeBuilder	Returns the spindle_range builder (inheritable Text)
SpindleRpmBuilder	Returns the spindle_rpm builder (inheritable Double)
SpindleRpmToggleBuilder	Returns the spindle_rpm_toggle builder (inheritable Int)
SpindleTextBuilder	Returns the spindle_text builder (inheritable Text)
SurfaceSpeedBuilder	Returns the surface_speed builder (inheritable Double)
Tag	Returns the Tag for this object.
ToolDirectionBuilder	Returns the tool_direction builder (inheritable Int)

Methods¶

Property Detail¶

ChamferFeed¶

FeedsTurnBuilder.ChamferFeed¶

Returns the chamfer feed builder (inheritable Feed)

-------------------------------------

Getter Method

Signature ChamferFeed

Returns:	the chamfer feed builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX8.0.0.

License requirements: cam_base (“CAM BASE”)

EngageSpindleSpeedBuilder¶

FeedsTurnBuilder.EngageSpindleSpeedBuilder¶

Returns the engage spindle speed builder (inheritable Double)

-------------------------------------

Getter Method

Signature EngageSpindleSpeedBuilder

Returns:	the engage_spindle_speed builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

EngageSpindleSpeedToggleBuilder¶

FeedsTurnBuilder.EngageSpindleSpeedToggleBuilder¶

Returns the engage spindle speed toggle builder (inheritable Int)

-------------------------------------

Getter Method

Signature EngageSpindleSpeedToggleBuilder

Returns:	the engage_spindle_speed_toggle builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedApproachBuilder¶

FeedsTurnBuilder.FeedApproachBuilder¶

Returns the feed_approach builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedApproachBuilder

Returns:	the feed_approach builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedCutBuilder¶

FeedsTurnBuilder.FeedCutBuilder¶

Returns the feed_cut builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedCutBuilder

Returns:	the feed_cut builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedDepartureBuilder¶

FeedsTurnBuilder.FeedDepartureBuilder¶

Returns the feed_departure builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedDepartureBuilder

Returns:	the feed_departure builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedEngageBuilder¶

FeedsTurnBuilder.FeedEngageBuilder¶

Returns the feed_engage builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedEngageBuilder

Returns:	the feed_engage builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedFirstCutBuilder¶

FeedsTurnBuilder.FeedFirstCutBuilder¶

Returns the feed_first_cut builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedFirstCutBuilder

Returns:	the feed_first_cut builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedMaxApproachLengthBuilder¶

FeedsTurnBuilder.FeedMaxApproachLengthBuilder¶

Returns the feed_max_approach_length builder (inheritable Double)

-------------------------------------

Getter Method

Signature FeedMaxApproachLengthBuilder

Returns:	the feed_max_approach_length builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedMaxApproachLengthFlagBuilder¶

FeedsTurnBuilder.FeedMaxApproachLengthFlagBuilder¶

Returns the feed_max_approach_length_flag builder (inheritable Int)

-------------------------------------

Getter Method

Signature FeedMaxApproachLengthFlagBuilder

Returns:	the feed_max_approach_length_flag builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedMinAccelerateDecelerateLengthBuilder¶

FeedsTurnBuilder.FeedMinAccelerateDecelerateLengthBuilder¶

Returns the feed_min_accelerate_decelerate_length builder (inheritable Double)

-------------------------------------

Getter Method

Signature FeedMinAccelerateDecelerateLengthBuilder

Returns:	the feed_min_accelerate_decelerate_length builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedMinAccelerateDecelerateLengthFlagBuilder¶

FeedsTurnBuilder.FeedMinAccelerateDecelerateLengthFlagBuilder¶

Returns the feed_min_accelerate_decelerate_length_flag builder (inheritable Int)

-------------------------------------

Getter Method

Signature FeedMinAccelerateDecelerateLengthFlagBuilder

Returns:	the feed_min_accelerate_decelerate_length_flag builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedPerToothBuilder¶

FeedsTurnBuilder.FeedPerToothBuilder¶

Returns the feed_per_tooth builder (inheritable Double)

-------------------------------------

Getter Method

Signature FeedPerToothBuilder

Returns:	the feed_per_tooth builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedRapidBuilder¶

FeedsTurnBuilder.FeedRapidBuilder¶

Returns the feed_rapid builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedRapidBuilder

Returns:	the feed_rapid builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedRapidOutput¶

FeedsTurnBuilder.FeedRapidOutput¶

Returns the feed rapid output builder (inheritable Enum)

-------------------------------------

Getter Method

Signature FeedRapidOutput

Returns:	the feed rapid output builder
Return type:	`NXOpen.CAM.InheritableFeedModeBuilder`

New in version NX8.0.0.

License requirements: cam_base (“CAM BASE”)

FeedRetractBuilder¶

FeedsTurnBuilder.FeedRetractBuilder¶

Returns the feed_retract builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedRetractBuilder

Returns:	the feed_retract builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedReturnBuilder¶

FeedsTurnBuilder.FeedReturnBuilder¶

Returns the feed_return builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedReturnBuilder

Returns:	the feed_return builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedSideCutBuilder¶

FeedsTurnBuilder.FeedSideCutBuilder¶

Returns the feed_side_cut builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedSideCutBuilder

Returns:	the feed_side_cut builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedStepoverBuilder¶

FeedsTurnBuilder.FeedStepoverBuilder¶

Returns the feed_stepover builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedStepoverBuilder

Returns:	the feed_stepover builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedTraversalBuilder¶

FeedsTurnBuilder.FeedTraversalBuilder¶

Returns the feed_traversal builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedTraversalBuilder

Returns:	the feed_traversal builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateAccelerateBuilder¶

FeedsTurnBuilder.FeedrateAccelerateBuilder¶

Returns the feedrate_accelerate builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateAccelerateBuilder

Returns:	the feedrate_accelerate builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateAccelerateLengthBuilder¶

FeedsTurnBuilder.FeedrateAccelerateLengthBuilder¶

Returns the feedrate_accelerate_length builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateAccelerateLengthBuilder

Returns:	the feedrate_accelerate_length builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateCircCcwBuilder¶

FeedsTurnBuilder.FeedrateCircCcwBuilder¶

Returns the feedrate_circ_ccw builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateCircCcwBuilder

Returns:	the feedrate_circ_ccw builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateCircCwBuilder¶

FeedsTurnBuilder.FeedrateCircCwBuilder¶

Returns the feedrate_circ_cw builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateCircCwBuilder

Returns:	the feedrate_circ_cw builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateCleanupCircCcwBuilder¶

FeedsTurnBuilder.FeedrateCleanupCircCcwBuilder¶

Returns the feedrate_cleanup_circ_ccw builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateCleanupCircCcwBuilder

Returns:	the feedrate_cleanup_circ_ccw builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateCleanupCircCwBuilder¶

FeedsTurnBuilder.FeedrateCleanupCircCwBuilder¶

Returns the feedrate_cleanup_circ_cw builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateCleanupCircCwBuilder

Returns:	the feedrate_cleanup_circ_cw builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateCleanupCutBuilder¶

FeedsTurnBuilder.FeedrateCleanupCutBuilder¶

Returns the feedrate_cleanup_cut builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateCleanupCutBuilder

Returns:	the feedrate_cleanup_cut builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateCleanupDiameterBuilder¶

FeedsTurnBuilder.FeedrateCleanupDiameterBuilder¶

Returns the feedrate_cleanup_diameter builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateCleanupDiameterBuilder

Returns:	the feedrate_cleanup_diameter builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateCleanupFaceBuilder¶

FeedsTurnBuilder.FeedrateCleanupFaceBuilder¶

Returns the feedrate_cleanup_face builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateCleanupFaceBuilder

Returns:	the feedrate_cleanup_face builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateCleanupLinearBuilder¶

FeedsTurnBuilder.FeedrateCleanupLinearBuilder¶

Returns the feedrate_cleanup_linear builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateCleanupLinearBuilder

Returns:	the feedrate_cleanup_linear builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateClearBuilder¶

FeedsTurnBuilder.FeedrateClearBuilder¶

Returns the feedrate_clear builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateClearBuilder

Returns:	the feedrate_clear builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateDecelerateBuilder¶

FeedsTurnBuilder.FeedrateDecelerateBuilder¶

Returns the feedrate_decelerate builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateDecelerateBuilder

Returns:	the feedrate_decelerate builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateDecelerateLengthBuilder¶

FeedsTurnBuilder.FeedrateDecelerateLengthBuilder¶

Returns the feedrate_decelerate_length builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateDecelerateLengthBuilder

Returns:	the feedrate_decelerate_length builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateDiameterBuilder¶

FeedsTurnBuilder.FeedrateDiameterBuilder¶

Returns the feedrate_diameter builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateDiameterBuilder

Returns:	the feedrate_diameter builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateFaceBuilder¶

FeedsTurnBuilder.FeedrateFaceBuilder¶

Returns the feedrate_face builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateFaceBuilder

Returns:	the feedrate_face builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateFinishAccelerateBuilder¶

FeedsTurnBuilder.FeedrateFinishAccelerateBuilder¶

Returns the feedrate_finish_accelerate builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateFinishAccelerateBuilder

Returns:	the feedrate_finish_accelerate builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateFinishAccelerateLengthBuilder¶

FeedsTurnBuilder.FeedrateFinishAccelerateLengthBuilder¶

Returns the feedrate_finish_accelerate_length builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateFinishAccelerateLengthBuilder

Returns:	the feedrate_finish_accelerate_length builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateFinishDecelerateBuilder¶

FeedsTurnBuilder.FeedrateFinishDecelerateBuilder¶

Returns the feedrate_finish_decelerate builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateFinishDecelerateBuilder

Returns:	the feedrate_finish_decelerate builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateFinishDecelerateLengthBuilder¶

FeedsTurnBuilder.FeedrateFinishDecelerateLengthBuilder¶

Returns the feedrate_finish_decelerate_length builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateFinishDecelerateLengthBuilder

Returns:	the feedrate_finish_decelerate_length builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateFinishRampInBuilder¶

FeedsTurnBuilder.FeedrateFinishRampInBuilder¶

Returns the feedrate_finish_ramp_in builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateFinishRampInBuilder

Returns:	the feedrate_finish_ramp_in builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateFinishRampLevelBuilder¶

FeedsTurnBuilder.FeedrateFinishRampLevelBuilder¶

Returns the feedrate_finish_ramp_level builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateFinishRampLevelBuilder

Returns:	the feedrate_finish_ramp_level builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateFinishRampOutBuilder¶

FeedsTurnBuilder.FeedrateFinishRampOutBuilder¶

Returns the feedrate_finish_ramp_out builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateFinishRampOutBuilder

Returns:	the feedrate_finish_ramp_out builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateLinearBuilder¶

FeedsTurnBuilder.FeedrateLinearBuilder¶

Returns the feedrate_linear builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateLinearBuilder

Returns:	the feedrate_linear builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateProfileCutBuilder¶

FeedsTurnBuilder.FeedrateProfileCutBuilder¶

Returns the feedrate_profile_cut builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateProfileCutBuilder

Returns:	the feedrate_profile_cut builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateRampInBuilder¶

FeedsTurnBuilder.FeedrateRampInBuilder¶

Returns the feedrate_ramp_in builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateRampInBuilder

Returns:	the feedrate_ramp_in builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateRampLevelBuilder¶

FeedsTurnBuilder.FeedrateRampLevelBuilder¶

Returns the feedrate_ramp_level builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateRampLevelBuilder

Returns:	the feedrate_ramp_level builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateRampOutBuilder¶

FeedsTurnBuilder.FeedrateRampOutBuilder¶

Returns the feedrate_ramp_out builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateRampOutBuilder

Returns:	the feedrate_ramp_out builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateRoughLastCutBuilder¶

FeedsTurnBuilder.FeedrateRoughLastCutBuilder¶

Returns the feedrate_rough_last_cut builder (inheritable Feed)

-------------------------------------

Getter Method

Signature FeedrateRoughLastCutBuilder

Returns:	the feedrate_rough_last_cut builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

FeedrateRoughLastCutForEntirePassTogBuilder¶

FeedsTurnBuilder.FeedrateRoughLastCutForEntirePassTogBuilder¶

Returns the feedrate_rough_last_cut_for_entire_pass_tog builder (inheritable Int)

-------------------------------------

Getter Method

Signature FeedrateRoughLastCutForEntirePassTogBuilder

Returns:	the feedrate_rough_last_cut_for_entire_pass_tog builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

RoundFeed¶

FeedsTurnBuilder.RoundFeed¶

Returns the round feed builder (inheritable Feed)

-------------------------------------

Getter Method

Signature RoundFeed

Returns:	the round feed builder
Return type:	`NXOpen.CAM.InheritableFeedBuilder`

New in version NX8.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleDirectionAutomaticBuilder¶

FeedsTurnBuilder.SpindleDirectionAutomaticBuilder¶

Returns the spindle_direction_automatic builder (inheritable Int)

-------------------------------------

Getter Method

Signature SpindleDirectionAutomaticBuilder

Returns:	the spindle_direction_automatic builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleDirectionBuilder¶

FeedsTurnBuilder.SpindleDirectionBuilder¶

Returns the spindle direction builder (inheritable Int)

-------------------------------------

Getter Method

Signature SpindleDirectionBuilder

Returns:	the spindle direction builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleMaximumRpmBuilder¶

FeedsTurnBuilder.SpindleMaximumRpmBuilder¶

Returns the spindle_maximum_rpm builder (inheritable Double)

-------------------------------------

Getter Method

Signature SpindleMaximumRpmBuilder

Returns:	the spindle_maximum_rpm builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleModeBuilder¶

FeedsTurnBuilder.SpindleModeBuilder¶

Returns the spindle_mode builder (inheritable Int)

-------------------------------------

Getter Method

Signature SpindleModeBuilder

Returns:	the spindle_mode builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindlePresetRpmBuilder¶

FeedsTurnBuilder.SpindlePresetRpmBuilder¶

Returns the spindle_preset_rpm builder (inheritable Double)

-------------------------------------

Getter Method

Signature SpindlePresetRpmBuilder

Returns:	the spindle_preset_rpm builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindlePresetRpmToggleBuilder¶

FeedsTurnBuilder.SpindlePresetRpmToggleBuilder¶

Returns the spindle_preset_rpm_toggle builder (inheritable Int)

-------------------------------------

Getter Method

Signature SpindlePresetRpmToggleBuilder

Returns:	the spindle_preset_rpm_toggle builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleRangeBuilder¶

FeedsTurnBuilder.SpindleRangeBuilder¶

Returns the spindle_range builder (inheritable Text)

-------------------------------------

Getter Method

Signature SpindleRangeBuilder

Returns:	the spindle_range builder
Return type:	`NXOpen.CAM.InheritableTextBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleRpmBuilder¶

FeedsTurnBuilder.SpindleRpmBuilder¶

Returns the spindle_rpm builder (inheritable Double)

-------------------------------------

Getter Method

Signature SpindleRpmBuilder

Returns:	the spindle_rpm builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleRpmToggleBuilder¶

FeedsTurnBuilder.SpindleRpmToggleBuilder¶

Returns the spindle_rpm_toggle builder (inheritable Int)

-------------------------------------

Getter Method

Signature SpindleRpmToggleBuilder

Returns:	the spindle_rpm_toggle builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SpindleTextBuilder¶

FeedsTurnBuilder.SpindleTextBuilder¶

Returns the spindle_text builder (inheritable Text)

-------------------------------------

Getter Method

Signature SpindleTextBuilder

Returns:	the spindle_text builder
Return type:	`NXOpen.CAM.InheritableTextBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

SurfaceSpeedBuilder¶

FeedsTurnBuilder.SurfaceSpeedBuilder¶

Returns the surface_speed builder (inheritable Double)

-------------------------------------

Getter Method

Signature SurfaceSpeedBuilder

Returns:	the surface_speed builder
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

ToolDirectionBuilder¶

FeedsTurnBuilder.ToolDirectionBuilder¶

Returns the tool_direction builder (inheritable Int)

-------------------------------------

Getter Method

Signature ToolDirectionBuilder

Returns:	the tool_direction builder
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)