InspectionAlignmentBuilder Class¶

class NXOpen.CAM.InspectionAlignmentBuilder¶

Bases: NXOpen.CAM.OperationBuilder

Represents a CMM Inspection Alignment builder

To create a new instance of this class, use NXOpen.CAM.InspectionOperationCollection.CreateInspectionAlignmentBuilder()

New in version NX7.5.2.

Properties¶

Property	Description
AlignOpName	Returns or sets the align op name
AlignType	Returns or sets the alignment type
ChannelName	Returns or sets the channel’s name
ComponentSelection	Returns the component selection
CsysPick	Returns or sets the csys pick
CycleEvent	Returns the cycle event
CycleTable	Returns the cycle
Description	Returns or sets the description
EndOfPath	Returns the end event builder
EndUdeSet	Returns the end ude set
FailGroupName	Returns or sets the fail group name
Geometry	Returns the geometry builder
GougeChecking	Returns or sets the gouge checking flag
HoleAxisType	Returns or sets the Hole Axis Type
HoleDepth	Returns the max depth distance builder
HoleDepthType	Returns or sets the Hole Depth Type
IterAvailSelect	Returns the iter avail select
IterConvergeVar	Returns or sets the iter converge variable
IterDev	Returns or sets the iter deviation
IterDevType	Returns or sets the iter deviation type
IterGroupName	Returns or sets the iter group name
IterMax	Returns or sets the iter max iterations
LayoutAndLayer	Returns the Layer and Layout
LocateAvailSelect	Returns the locate avail select
LocateXrot	Returns or sets the locate xrot
LocateXtrans	Returns or sets the locate xtrans
LocateYrot	Returns or sets the locate yrot
LocateYtrans	Returns or sets the locate ytrans
LocateZrot	Returns or sets the locate zrot
LocateZtrans	Returns or sets the locate ztrans
MotionOutputBuilder	Returns the motion output builder
Notes	Returns the notes builder
OptimizationBasedOn	Returns or sets the optimization based on in operation
OptimizationDistanceMethod	Returns or sets the optimization distance method in operation
OptimizationLevel	Returns or sets the optimization level in operation
OptimizationMethod	Returns or sets the optim method
PathDisplayOptions	Returns the path display options builder
PcsName	Returns or sets the pcs name
PostToolPathExit	Returns or sets the environment variable that points to the post tool path generation library which has the exit
PriDatLetter	Returns or sets the pri dat letter
PriDirection	Returns or sets the pri direction
PriXorigin	Returns or sets the pri xorigin
PriYorigin	Returns or sets the pri yorigin
PriZorigin	Returns or sets the pri zorigin
RPSAvailSelect	Returns the RPS available select
RecallCsys	Returns or sets the recall csys
RecallDid	Returns or sets the recall device id
RecallExtName	Returns or sets the recall external name
RecallIntName	Returns or sets the recall internal name
RecallState	Returns or sets the recall state
RetractDistance	Returns the Retract Distance builder (inheritable double)
RetractDistanceOnToolAxisChange	Returns the Retract Distance on Tool Axis Change builder (inheritable double)
RotateTableAngle	Returns or sets the angle to rotate table
RotateTableAngularDeviation	Returns or sets the rotate table angular deviation
RotateTableDirection	Returns or sets the rotate table direction
RotateTableFeature	Returns or sets the feature used to position table
RotateTableFeatureSelect	Returns the feature selected to position table
RotateTableMethod	Returns or sets the rotate table method
RotateTableName	Returns or sets the name of rotary table to rotate
RotateTablePcsUpdateOption	Returns or sets the rotate table pcs update
RotationAngle	Returns or sets the rot angle
RotationAxis	Returns or sets the rot axis
RotationDatumLetter	Returns or sets the rot datum letter
RotationDirection	Returns or sets the rot dir
RotationFeature	Returns or sets the rot feature
RotationFeatureSelect	Returns the rot feature select
RotationMethod	Returns or sets the rot method
SafeClearance	Returns the safe clearance builder
SaveDid	Returns or sets the save device id
SavePcsLabel	Returns or sets the save pcs label
SaveState	Returns or sets the save state
SecDatLetter	Returns or sets the sec dat letter
SecDirection	Returns or sets the sec direction
SecXorigin	Returns or sets the sec xorigin
SecYorigin	Returns or sets the sec yorigin
SecZorigin	Returns or sets the sec zorigin
SelectToolFlag	Returns or sets the user selected tool
StartOfPath	Returns the start event builder
StartUdeSet	Returns the start ude set
Tag	Returns the Tag for this object.
TerDatLetter	Returns or sets the ter dat letter
TerDirection	Returns or sets the ter xdirection
TerXorigin	Returns or sets the ter xorigin
TerYorigin	Returns or sets the ter yorigin
TerZorigin	Returns or sets the ter zorigin
ToolChangeSetting	Returns the tool change builder
ToolPathEditor	Returns the Tool Path Editor Builder
ToolPathSplitParametersBuilder	Returns the tool path split Parameters
WcsOrientOption	Returns or sets the WCS Orient option
XtDatumLetter	Returns or sets the xt datum letter
XtDistance	Returns or sets the xt distance
XtFeature	Returns or sets the xt feature
XtFeatureSelect	Returns the xt feature select
XtMethod	Returns or sets the xt method
YtDatumLetter	Returns or sets the yt datum letter
YtDistance	Returns or sets the yt distance
YtFeature	Returns or sets the yt feature
YtFeatureSelect	Returns the yt feature select
YtMethod	Returns or sets the yt method
ZtDatumLetter	Returns or sets the zt datum letter
ZtDistance	Returns or sets the zt distance
ZtFeature	Returns or sets the zt feature
ZtFeatureSelect	Returns the zt feature select
ZtMethod	Returns or sets the zt method

Methods¶

Method	Description
Commit	Commits any edits that have been applied to the builder.
Destroy	Deletes the builder, and cleans up any objects created by the builder.
GetCommittedObjects	For builders that create more than one object, this method returns the objects that are created by commit.
GetCustomizableItemBuilder	Returns the customizable item builder for the given customizable item name
GetCustomizableItemNames	Returns the names for all customizable item ids
GetHoleAxisValues	Get the Hole Axis values
GetLocateFeatures	Return the Locate features.
GetObject	Returns the object currently being edited by this builder.
GetRPSFeatures	Return the RPS features.
GetRPSXFeatures	Return the RPS features controlling the X direction.
GetRPSYFeatures	Return the RPS features controlling the Y direction.
GetRPSZFeatures	Return the RPS features controlling the Z direction.
SetHoleAxisValues	Set the Hole Axis values
SetLocateFeatures	Set the Locate features.
SetRPSFeatures	Set the RPS features.
SetRPSXFeatures	Set the RPS features controlling the X direction.
SetRPSYFeatures	Set the RPS features controlling the Y direction.
SetRPSZFeatures	Set the RPS features controlling the Z direction.
ShowResults	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations¶

InspectionAlignmentBuilderAlignTypes Enumeration	Alignment Operation Type
InspectionAlignmentBuilderAlignmentDirections Enumeration	Alignment directions of datum features
InspectionAlignmentBuilderIterDevTypes Enumeration	Iterate deviation type
InspectionAlignmentBuilderRecallStates Enumeration	PCS state to recall, either internal or external
InspectionAlignmentBuilderRotateTableDirections Enumeration	Rotary table direction
InspectionAlignmentBuilderRotateTableMethods Enumeration	Rotary Table methods
InspectionAlignmentBuilderRotateTablePcsUpdateOptions Enumeration	Rotary table PCS Update options
InspectionAlignmentBuilderRotationAxisOptions Enumeration	PCS Axis to Rotate about
InspectionAlignmentBuilderRotationDirections Enumeration	Direction to rotate about
InspectionAlignmentBuilderRotationMethods Enumeration	PCS Rotation method
InspectionAlignmentBuilderSaveStates Enumeration	PCS state to save, either Actual or nominal
InspectionAlignmentBuilderXtMethods Enumeration	PCS Translation method in X direction
InspectionAlignmentBuilderYtMethods Enumeration	PCS Translation method in Y direction
InspectionAlignmentBuilderZtMethods Enumeration	PCS Translation method in Z direction

Property Detail¶

AlignOpName¶

InspectionAlignmentBuilder.AlignOpName¶

Returns or sets the align op name

-------------------------------------

Getter Method

Signature AlignOpName

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AlignOpName

Parameters:	alignOpName (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

AlignType¶

InspectionAlignmentBuilder.AlignType¶

Returns or sets the alignment type

-------------------------------------

Getter Method

Signature AlignType

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderAlignTypes`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AlignType

Parameters:	alignType (`NXOpen.CAM.InspectionAlignmentBuilderAlignTypes`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

ComponentSelection¶

InspectionAlignmentBuilder.ComponentSelection¶

Returns the component selection

-------------------------------------

Getter Method

Signature ComponentSelection

Returns:
Return type:	`NXOpen.Assemblies.SelectComponent`

New in version NX9.0.0.

License requirements: None.

CsysPick¶

InspectionAlignmentBuilder.CsysPick¶

Returns or sets the csys pick

-------------------------------------

Getter Method

Signature CsysPick

Returns:
Return type:	`NXOpen.CoordinateSystem`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature CsysPick

Parameters:	csysPick (`NXOpen.CoordinateSystem`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

FailGroupName¶

InspectionAlignmentBuilder.FailGroupName¶

Returns or sets the fail group name

-------------------------------------

Getter Method

Signature FailGroupName

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature FailGroupName

Parameters:	failGroupName (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

IterAvailSelect¶

InspectionAlignmentBuilder.IterAvailSelect¶

Returns the iter avail select

-------------------------------------

Getter Method

Signature IterAvailSelect

Returns:
Return type:	`NXOpen.SelectNXObject`

New in version NX7.0.0.

License requirements: None.

IterConvergeVar¶

InspectionAlignmentBuilder.IterConvergeVar¶

Returns or sets the iter converge variable

-------------------------------------

Getter Method

Signature IterConvergeVar

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature IterConvergeVar

Parameters:	iterConvergeVar (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

IterDev¶

InspectionAlignmentBuilder.IterDev¶

Returns or sets the iter deviation

-------------------------------------

Getter Method

Signature IterDev

Returns:
Return type:	float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature IterDev

Parameters:	iterDev (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

IterDevType¶

InspectionAlignmentBuilder.IterDevType¶

Returns or sets the iter deviation type

-------------------------------------

Getter Method

Signature IterDevType

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderIterDevTypes`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature IterDevType

Parameters:	iterDevType (`NXOpen.CAM.InspectionAlignmentBuilderIterDevTypes`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

IterGroupName¶

InspectionAlignmentBuilder.IterGroupName¶

Returns or sets the iter group name

-------------------------------------

Getter Method

Signature IterGroupName

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature IterGroupName

Parameters:	iterGroupName (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

IterMax¶

InspectionAlignmentBuilder.IterMax¶

Returns or sets the iter max iterations

-------------------------------------

Getter Method

Signature IterMax

Returns:
Return type:	int

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature IterMax

Parameters:	iterMax (int) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

LocateAvailSelect¶

InspectionAlignmentBuilder.LocateAvailSelect¶

Returns the locate avail select

-------------------------------------

Getter Method

Signature LocateAvailSelect

Returns:
Return type:	`NXOpen.SelectNXObject`

New in version NX7.0.0.

License requirements: None.

LocateXrot¶

InspectionAlignmentBuilder.LocateXrot¶

Returns or sets the locate xrot

-------------------------------------

Getter Method

Signature LocateXrot

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature LocateXrot

Parameters:	locateXrot (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

LocateXtrans¶

InspectionAlignmentBuilder.LocateXtrans¶

Returns or sets the locate xtrans

-------------------------------------

Getter Method

Signature LocateXtrans

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature LocateXtrans

Parameters:	locateXtrans (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

LocateYrot¶

InspectionAlignmentBuilder.LocateYrot¶

Returns or sets the locate yrot

-------------------------------------

Getter Method

Signature LocateYrot

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature LocateYrot

Parameters:	locateYrot (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

LocateYtrans¶

InspectionAlignmentBuilder.LocateYtrans¶

Returns or sets the locate ytrans

-------------------------------------

Getter Method

Signature LocateYtrans

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature LocateYtrans

Parameters:	locateYtrans (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

LocateZrot¶

InspectionAlignmentBuilder.LocateZrot¶

Returns or sets the locate zrot

-------------------------------------

Getter Method

Signature LocateZrot

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature LocateZrot

Parameters:	locateZrot (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

LocateZtrans¶

InspectionAlignmentBuilder.LocateZtrans¶

Returns or sets the locate ztrans

-------------------------------------

Getter Method

Signature LocateZtrans

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature LocateZtrans

Parameters:	locateZtrans (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

PcsName¶

InspectionAlignmentBuilder.PcsName¶

Returns or sets the pcs name

-------------------------------------

Getter Method

Signature PcsName

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PcsName

Parameters:	pcsName (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

PriDatLetter¶

InspectionAlignmentBuilder.PriDatLetter¶

Returns or sets the pri dat letter

-------------------------------------

Getter Method

Signature PriDatLetter

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PriDatLetter

Parameters:	priDatLetter (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

PriDirection¶

InspectionAlignmentBuilder.PriDirection¶

Returns or sets the pri direction

-------------------------------------

Getter Method

Signature PriDirection

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderAlignmentDirections`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PriDirection

Parameters:	priDirection (`NXOpen.CAM.InspectionAlignmentBuilderAlignmentDirections`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

PriXorigin¶

InspectionAlignmentBuilder.PriXorigin¶

Returns or sets the pri xorigin

-------------------------------------

Getter Method

Signature PriXorigin

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PriXorigin

Parameters:	priXorigin (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

PriYorigin¶

InspectionAlignmentBuilder.PriYorigin¶

Returns or sets the pri yorigin

-------------------------------------

Getter Method

Signature PriYorigin

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PriYorigin

Parameters:	priYorigin (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

PriZorigin¶

InspectionAlignmentBuilder.PriZorigin¶

Returns or sets the pri zorigin

-------------------------------------

Getter Method

Signature PriZorigin

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PriZorigin

Parameters:	priZorigin (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RPSAvailSelect¶

InspectionAlignmentBuilder.RPSAvailSelect¶

Returns the RPS available select

-------------------------------------

Getter Method

Signature RPSAvailSelect

Returns:
Return type:	`NXOpen.SelectNXObject`

New in version NX11.0.1.

License requirements: None.

RecallCsys¶

InspectionAlignmentBuilder.RecallCsys¶

Returns or sets the recall csys

-------------------------------------

Getter Method

Signature RecallCsys

Returns:
Return type:	`NXOpen.CoordinateSystem`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RecallCsys

Parameters:	recallCsys (`NXOpen.CoordinateSystem`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RecallDid¶

InspectionAlignmentBuilder.RecallDid¶

Returns or sets the recall device id

-------------------------------------

Getter Method

Signature RecallDid

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RecallDid

Parameters:	recallDid (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RecallExtName¶

InspectionAlignmentBuilder.RecallExtName¶

Returns or sets the recall external name

-------------------------------------

Getter Method

Signature RecallExtName

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RecallExtName

Parameters:	recallExtName (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RecallIntName¶

InspectionAlignmentBuilder.RecallIntName¶

Returns or sets the recall internal name

-------------------------------------

Getter Method

Signature RecallIntName

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RecallIntName

Parameters:	recallIntName (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RecallState¶

InspectionAlignmentBuilder.RecallState¶

Returns or sets the recall state

-------------------------------------

Getter Method

Signature RecallState

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderRecallStates`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RecallState

Parameters:	recallState (`NXOpen.CAM.InspectionAlignmentBuilderRecallStates`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotateTableAngle¶

InspectionAlignmentBuilder.RotateTableAngle¶

Returns or sets the angle to rotate table

-------------------------------------

Getter Method

Signature RotateTableAngle

Returns:
Return type:	float

New in version NX7.5.2.

License requirements: None.

-------------------------------------

Setter Method

Signature RotateTableAngle

Parameters:	angle (float) –

New in version NX7.5.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotateTableAngularDeviation¶

InspectionAlignmentBuilder.RotateTableAngularDeviation¶

Returns or sets the rotate table angular deviation

-------------------------------------

Getter Method

Signature RotateTableAngularDeviation

Returns:
Return type:	float

New in version NX7.5.2.

License requirements: None.

-------------------------------------

Setter Method

Signature RotateTableAngularDeviation

Parameters:	fz (float) –

New in version NX7.5.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotateTableDirection¶

InspectionAlignmentBuilder.RotateTableDirection¶

Returns or sets the rotate table direction

-------------------------------------

Getter Method

Signature RotateTableDirection

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderRotateTableDirections`

New in version NX7.5.2.

License requirements: None.

-------------------------------------

Setter Method

Signature RotateTableDirection

Parameters:	direction (`NXOpen.CAM.InspectionAlignmentBuilderRotateTableDirections`) –

New in version NX7.5.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotateTableFeature¶

InspectionAlignmentBuilder.RotateTableFeature¶

Returns or sets the feature used to position table

-------------------------------------

Getter Method

Signature RotateTableFeature

Returns:
Return type:	str

New in version NX7.5.2.

License requirements: None.

-------------------------------------

Setter Method

Signature RotateTableFeature

Parameters:	rotateTableFeature (str) –

New in version NX7.5.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotateTableFeatureSelect¶

InspectionAlignmentBuilder.RotateTableFeatureSelect¶

Returns the feature selected to position table

-------------------------------------

Getter Method

Signature RotateTableFeatureSelect

Returns:
Return type:	`NXOpen.SelectNXObject`

New in version NX7.5.2.

License requirements: None.

RotateTableMethod¶

InspectionAlignmentBuilder.RotateTableMethod¶

Returns or sets the rotate table method

-------------------------------------

Getter Method

Signature RotateTableMethod

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderRotateTableMethods`

New in version NX7.5.2.

License requirements: None.

-------------------------------------

Setter Method

Signature RotateTableMethod

Parameters:	method (`NXOpen.CAM.InspectionAlignmentBuilderRotateTableMethods`) –

New in version NX7.5.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotateTableName¶

InspectionAlignmentBuilder.RotateTableName¶

Returns or sets the name of rotary table to rotate

-------------------------------------

Getter Method

Signature RotateTableName

Returns:
Return type:	str

New in version NX7.5.2.

License requirements: None.

-------------------------------------

Setter Method

Signature RotateTableName

Parameters:	tableName (str) –

New in version NX7.5.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotateTablePcsUpdateOption¶

InspectionAlignmentBuilder.RotateTablePcsUpdateOption¶

Returns or sets the rotate table pcs update

-------------------------------------

Getter Method

Signature RotateTablePcsUpdateOption

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderRotateTablePcsUpdateOptions`

New in version NX7.5.2.

License requirements: None.

-------------------------------------

Setter Method

Signature RotateTablePcsUpdateOption

Parameters:	pcsUpdate (`NXOpen.CAM.InspectionAlignmentBuilderRotateTablePcsUpdateOptions`) –

New in version NX7.5.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotationAngle¶

InspectionAlignmentBuilder.RotationAngle¶

Returns or sets the rot angle

-------------------------------------

Getter Method

Signature RotationAngle

Returns:
Return type:	float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RotationAngle

Parameters:	rotationAngle (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotationAxis¶

InspectionAlignmentBuilder.RotationAxis¶

Returns or sets the rot axis

-------------------------------------

Getter Method

Signature RotationAxis

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderRotationAxisOptions`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RotationAxis

Parameters:	rotationAxis (`NXOpen.CAM.InspectionAlignmentBuilderRotationAxisOptions`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotationDatumLetter¶

InspectionAlignmentBuilder.RotationDatumLetter¶

Returns or sets the rot datum letter

-------------------------------------

Getter Method

Signature RotationDatumLetter

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RotationDatumLetter

Parameters:	rotationDatumLetter (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotationDirection¶

InspectionAlignmentBuilder.RotationDirection¶

Returns or sets the rot dir

-------------------------------------

Getter Method

Signature RotationDirection

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderRotationDirections`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RotationDirection

Parameters:	rotationDirection (`NXOpen.CAM.InspectionAlignmentBuilderRotationDirections`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotationFeature¶

InspectionAlignmentBuilder.RotationFeature¶

Returns or sets the rot feature

-------------------------------------

Getter Method

Signature RotationFeature

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RotationFeature

Parameters:	rotationFeature (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

RotationFeatureSelect¶

InspectionAlignmentBuilder.RotationFeatureSelect¶

Returns the rot feature select

-------------------------------------

Getter Method

Signature RotationFeatureSelect

Returns:
Return type:	`NXOpen.SelectNXObject`

New in version NX7.0.0.

License requirements: None.

RotationMethod¶

InspectionAlignmentBuilder.RotationMethod¶

Returns or sets the rot method

-------------------------------------

Getter Method

Signature RotationMethod

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderRotationMethods`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RotationMethod

Parameters:	rotationMethod (`NXOpen.CAM.InspectionAlignmentBuilderRotationMethods`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SaveDid¶

InspectionAlignmentBuilder.SaveDid¶

Returns or sets the save device id

-------------------------------------

Getter Method

Signature SaveDid

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SaveDid

Parameters:	saveDid (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SavePcsLabel¶

InspectionAlignmentBuilder.SavePcsLabel¶

Returns or sets the save pcs label

-------------------------------------

Getter Method

Signature SavePcsLabel

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SavePcsLabel

Parameters:	savePcsLabel (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SaveState¶

InspectionAlignmentBuilder.SaveState¶

Returns or sets the save state

-------------------------------------

Getter Method

Signature SaveState

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderSaveStates`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SaveState

Parameters:	saveState (`NXOpen.CAM.InspectionAlignmentBuilderSaveStates`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SecDatLetter¶

InspectionAlignmentBuilder.SecDatLetter¶

Returns or sets the sec dat letter

-------------------------------------

Getter Method

Signature SecDatLetter

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SecDatLetter

Parameters:	secDatLetter (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SecDirection¶

InspectionAlignmentBuilder.SecDirection¶

Returns or sets the sec direction

-------------------------------------

Getter Method

Signature SecDirection

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderAlignmentDirections`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SecDirection

Parameters:	secDirection (`NXOpen.CAM.InspectionAlignmentBuilderAlignmentDirections`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SecXorigin¶

InspectionAlignmentBuilder.SecXorigin¶

Returns or sets the sec xorigin

-------------------------------------

Getter Method

Signature SecXorigin

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SecXorigin

Parameters:	secXorigin (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SecYorigin¶

InspectionAlignmentBuilder.SecYorigin¶

Returns or sets the sec yorigin

-------------------------------------

Getter Method

Signature SecYorigin

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SecYorigin

Parameters:	secYorigin (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SecZorigin¶

InspectionAlignmentBuilder.SecZorigin¶

Returns or sets the sec zorigin

-------------------------------------

Getter Method

Signature SecZorigin

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SecZorigin

Parameters:	secZorigin (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

TerDatLetter¶

InspectionAlignmentBuilder.TerDatLetter¶

Returns or sets the ter dat letter

-------------------------------------

Getter Method

Signature TerDatLetter

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TerDatLetter

Parameters:	terDatLetter (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

TerDirection¶

InspectionAlignmentBuilder.TerDirection¶

Returns or sets the ter xdirection

-------------------------------------

Getter Method

Signature TerDirection

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderAlignmentDirections`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TerDirection

Parameters:	terDirection (`NXOpen.CAM.InspectionAlignmentBuilderAlignmentDirections`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

TerXorigin¶

InspectionAlignmentBuilder.TerXorigin¶

Returns or sets the ter xorigin

-------------------------------------

Getter Method

Signature TerXorigin

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TerXorigin

Parameters:	terXorigin (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

TerYorigin¶

InspectionAlignmentBuilder.TerYorigin¶

Returns or sets the ter yorigin

-------------------------------------

Getter Method

Signature TerYorigin

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TerYorigin

Parameters:	terYorigin (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

TerZorigin¶

InspectionAlignmentBuilder.TerZorigin¶

Returns or sets the ter zorigin

-------------------------------------

Getter Method

Signature TerZorigin

Returns:
Return type:	bool

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TerZorigin

Parameters:	terZorigin (bool) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

WcsOrientOption¶

InspectionAlignmentBuilder.WcsOrientOption¶

Returns or sets the WCS Orient option

-------------------------------------

Getter Method

Signature WcsOrientOption

Returns:
Return type:	bool

New in version NX8.5.3.

License requirements: None.

-------------------------------------

Setter Method

Signature WcsOrientOption

Parameters:	wcsOrientOption (bool) –

New in version NX8.5.3.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

XtDatumLetter¶

InspectionAlignmentBuilder.XtDatumLetter¶

Returns or sets the xt datum letter

-------------------------------------

Getter Method

Signature XtDatumLetter

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature XtDatumLetter

Parameters:	xtDatumLetter (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

XtDistance¶

InspectionAlignmentBuilder.XtDistance¶

Returns or sets the xt distance

-------------------------------------

Getter Method

Signature XtDistance

Returns:
Return type:	float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature XtDistance

Parameters:	xtDistance (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

XtFeature¶

InspectionAlignmentBuilder.XtFeature¶

Returns or sets the xt feature

-------------------------------------

Getter Method

Signature XtFeature

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature XtFeature

Parameters:	xtFeature (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

XtFeatureSelect¶

InspectionAlignmentBuilder.XtFeatureSelect¶

Returns the xt feature select

-------------------------------------

Getter Method

Signature XtFeatureSelect

Returns:
Return type:	`NXOpen.SelectNXObject`

New in version NX7.0.0.

License requirements: None.

XtMethod¶

InspectionAlignmentBuilder.XtMethod¶

Returns or sets the xt method

-------------------------------------

Getter Method

Signature XtMethod

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderXtMethods`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature XtMethod

Parameters:	xtMethod (`NXOpen.CAM.InspectionAlignmentBuilderXtMethods`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

YtDatumLetter¶

InspectionAlignmentBuilder.YtDatumLetter¶

Returns or sets the yt datum letter

-------------------------------------

Getter Method

Signature YtDatumLetter

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature YtDatumLetter

Parameters:	ytDatumLetter (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

YtDistance¶

InspectionAlignmentBuilder.YtDistance¶

Returns or sets the yt distance

-------------------------------------

Getter Method

Signature YtDistance

Returns:
Return type:	float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature YtDistance

Parameters:	ytDistance (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

YtFeature¶

InspectionAlignmentBuilder.YtFeature¶

Returns or sets the yt feature

-------------------------------------

Getter Method

Signature YtFeature

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature YtFeature

Parameters:	ytFeature (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

YtFeatureSelect¶

InspectionAlignmentBuilder.YtFeatureSelect¶

Returns the yt feature select

-------------------------------------

Getter Method

Signature YtFeatureSelect

Returns:
Return type:	`NXOpen.SelectNXObject`

New in version NX7.0.0.

License requirements: None.

YtMethod¶

InspectionAlignmentBuilder.YtMethod¶

Returns or sets the yt method

-------------------------------------

Getter Method

Signature YtMethod

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderYtMethods`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature YtMethod

Parameters:	ytMethod (`NXOpen.CAM.InspectionAlignmentBuilderYtMethods`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

ZtDatumLetter¶

InspectionAlignmentBuilder.ZtDatumLetter¶

Returns or sets the zt datum letter

-------------------------------------

Getter Method

Signature ZtDatumLetter

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ZtDatumLetter

Parameters:	ztDatumLetter (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

ZtDistance¶

InspectionAlignmentBuilder.ZtDistance¶

Returns or sets the zt distance

-------------------------------------

Getter Method

Signature ZtDistance

Returns:
Return type:	float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ZtDistance

Parameters:	ztDistance (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

ZtFeature¶

InspectionAlignmentBuilder.ZtFeature¶

Returns or sets the zt feature

-------------------------------------

Getter Method

Signature ZtFeature

Returns:
Return type:	str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ZtFeature

Parameters:	ztFeature (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

ZtFeatureSelect¶

InspectionAlignmentBuilder.ZtFeatureSelect¶

Returns the zt feature select

-------------------------------------

Getter Method

Signature ZtFeatureSelect

Returns:
Return type:	`NXOpen.SelectNXObject`

New in version NX7.0.0.

License requirements: None.

ZtMethod¶

InspectionAlignmentBuilder.ZtMethod¶

Returns or sets the zt method

-------------------------------------

Getter Method

Signature ZtMethod

Returns:
Return type:	`NXOpen.CAM.InspectionAlignmentBuilderZtMethods`

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ZtMethod

Parameters:	ztMethod (`NXOpen.CAM.InspectionAlignmentBuilderZtMethods`) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

Method Detail¶

GetLocateFeatures¶

InspectionAlignmentBuilder.GetLocateFeatures¶

Return the Locate features.

Signature GetLocateFeatures()

Returns:	Locate features
Return type:	list of str

New in version NX11.0.2.

License requirements: None.

GetRPSFeatures¶

InspectionAlignmentBuilder.GetRPSFeatures¶

Return the RPS features.

Signature GetRPSFeatures()

Returns:	RPS features
Return type:	list of str

New in version NX11.0.1.

License requirements: None.

GetRPSXFeatures¶

InspectionAlignmentBuilder.GetRPSXFeatures¶

Return the RPS features controlling the X direction.

Signature GetRPSXFeatures()

Returns:	RPS X features
Return type:	list of str

New in version NX11.0.1.

License requirements: None.

GetRPSYFeatures¶

InspectionAlignmentBuilder.GetRPSYFeatures¶

Return the RPS features controlling the Y direction.

Signature GetRPSYFeatures()

Returns:	RPS Y features
Return type:	list of str

New in version NX11.0.1.

License requirements: None.

GetRPSZFeatures¶

InspectionAlignmentBuilder.GetRPSZFeatures¶

Return the RPS features controlling the Z direction.

Signature GetRPSZFeatures()

Returns:	RPS Z features
Return type:	list of str

New in version NX11.0.1.

License requirements: None.

SetLocateFeatures¶

InspectionAlignmentBuilder.SetLocateFeatures¶

Set the Locate features.

Signature SetLocateFeatures(locateFeatures)

Parameters:	locateFeatures (list of str) – Locate features

New in version NX11.0.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SetRPSFeatures¶

InspectionAlignmentBuilder.SetRPSFeatures¶

Set the RPS features.

Signature SetRPSFeatures(rpsFeatures)

Parameters:	rpsFeatures (list of str) – RPS features

New in version NX11.0.1.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SetRPSXFeatures¶

InspectionAlignmentBuilder.SetRPSXFeatures¶

Set the RPS features controlling the X direction.

Signature SetRPSXFeatures(rpsXFeatures)

Parameters:	rpsXFeatures (list of str) – RPS X features

New in version NX11.0.1.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SetRPSYFeatures¶

InspectionAlignmentBuilder.SetRPSYFeatures¶

Set the RPS features controlling the Y direction.

Signature SetRPSYFeatures(rpsYFeatures)

Parameters:	rpsYFeatures (list of str) – RPS Y features

New in version NX11.0.1.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SetRPSZFeatures¶

InspectionAlignmentBuilder.SetRPSZFeatures¶

Set the RPS features controlling the Z direction.

Signature SetRPSZFeatures(rpsZFeatures)

Parameters:	rpsZFeatures (list of str) – RPS Z features

New in version NX11.0.1.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

Validate¶

InspectionAlignmentBuilder.Validate¶

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:	Was self validation successful
Return type:	bool

New in version NX3.0.1.

License requirements: None.