InspectionConeFeatureBuilder Class

class NXOpen.CAM.InspectionConeFeatureBuilder

Bases: NXOpen.CAM.OperationBuilder

Represents a CMM Inspection Cone Feature builder

To create a new instance of this class, use NXOpen.CAM.InspectionOperationCollection.CreateInspectionConeFeatureBuilder()

New in version NX7.0.0.

Properties

Property Description
AxisDirectionI Returns or sets the axis direction vector I component
AxisDirectionJ Returns or sets the axis direction vector J component
AxisDirectionK Returns or sets the axis direction vector K component
AxisExtrapolationModeBuilder Returns the Axis Extrapolation Mode Builder
AxisVector Returns or sets the cones axis vector
ChannelName Returns or sets the channel’s name
CsysReferenceType Returns or sets the coordinate system reference type
CycleEvent Returns the cycle event
CycleTable Returns the cycle
CylinderCircleFitModeBuilder Returns the Cylinder Circle Fitting Mode Builder
Description Returns or sets the description
EndOfPath Returns the end event builder
EndUdeSet Returns the end ude set
ExtentType Returns or sets the extent type
Geometry Returns the geometry builder
GougeChecking Returns or sets the gouge checking flag
HoleAxisType Returns or sets the Hole Axis Type
HoleDepth Returns the max depth distance builder
HoleDepthType Returns or sets the Hole Depth Type
IncludedAngle Returns or sets the included angle of the cone
InnerOuterType Returns or sets the inspection feature inner/outer type (hole/pin)
LayoutAndLayer Returns the Layer and Layout
MotionOutputBuilder Returns the motion output builder
Name Returns or sets the name
Notes Returns the notes builder
OptimizationBasedOn Returns or sets the optimization based on in operation
OptimizationDistanceMethod Returns or sets the optimization distance method in operation
OptimizationLevel Returns or sets the optimization level in operation
OptimizationMethod Returns or sets the optim method
PathDisplayOptions Returns the path display options builder
PostToolPathExit Returns or sets the environment variable that points to the post tool path generation library which has the exit
RetractDistance Returns the Retract Distance builder (inheritable double)
RetractDistanceOnToolAxisChange Returns the Retract Distance on Tool Axis Change builder (inheritable double)
SafeClearance Returns the safe clearance builder
SelectToolFlag Returns or sets the user selected tool
SelectedCone Returns the selected cone
StartOfPath Returns the start event builder
StartUdeSet Returns the start ude set
Tag Returns the Tag for this object.
ToolChangeSetting Returns the tool change builder
ToolPathEditor Returns the Tool Path Editor Builder
ToolPathSplitParametersBuilder Returns the tool path split Parameters
VertexPointX Returns or sets the vertex point X coordinate
VertexPointY Returns or sets the vertex point Y coordinate
VertexPointZ Returns or sets the vertex point Z coordinate

Methods

Method Description
Commit Commits any edits that have been applied to the builder.
Destroy Deletes the builder, and cleans up any objects created by the builder.
GetCommittedObjects For builders that create more than one object, this method returns the objects that are created by commit.
GetCustomizableItemBuilder Returns the customizable item builder for the given customizable item name
GetCustomizableItemNames Returns the names for all customizable item ids
GetHoleAxisValues Get the Hole Axis values
GetObject Returns the object currently being edited by this builder.
SetHoleAxisValues Set the Hole Axis values
ShowResults Updates the model to reflect the result of an edit to the model for all builders that support showing results.
UpdateParams Updates cone inspection feature characteristic parameters based on selected geometry
Validate Validate whether the inputs to the component are sufficient for commit to be called.

Property Detail

AxisDirectionI

InspectionConeFeatureBuilder.AxisDirectionI

Returns or sets the axis direction vector I component

-------------------------------------

Getter Method

Signature AxisDirectionI

Returns:
Return type:float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AxisDirectionI

Parameters:axisDirectionI (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

AxisDirectionJ

InspectionConeFeatureBuilder.AxisDirectionJ

Returns or sets the axis direction vector J component

-------------------------------------

Getter Method

Signature AxisDirectionJ

Returns:
Return type:float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AxisDirectionJ

Parameters:axisDirectionJ (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

AxisDirectionK

InspectionConeFeatureBuilder.AxisDirectionK

Returns or sets the axis direction vector K component

-------------------------------------

Getter Method

Signature AxisDirectionK

Returns:
Return type:float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AxisDirectionK

Parameters:axisDirectionK (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

AxisExtrapolationModeBuilder

InspectionConeFeatureBuilder.AxisExtrapolationModeBuilder

Returns the Axis Extrapolation Mode Builder

-------------------------------------

Getter Method

Signature AxisExtrapolationModeBuilder

Returns:
Return type:NXOpen.CAM.InspectionAxisExtrapolationModeBuilder

New in version NX9.0.0.

License requirements: None.

AxisVector

InspectionConeFeatureBuilder.AxisVector

Returns or sets the cones axis vector

-------------------------------------

Getter Method

Signature AxisVector

Returns:
Return type:NXOpen.Direction

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AxisVector

Parameters:axisVector (NXOpen.Direction) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CsysReferenceType

InspectionConeFeatureBuilder.CsysReferenceType

Returns or sets the coordinate system reference type

-------------------------------------

Getter Method

Signature CsysReferenceType

Returns:
Return type:NXOpen.CAM.CamInspectionOperationCsysreferencetypes

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature CsysReferenceType

Parameters:csysReferenceType (NXOpen.CAM.CamInspectionOperationCsysreferencetypes) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CylinderCircleFitModeBuilder

InspectionConeFeatureBuilder.CylinderCircleFitModeBuilder

Returns the Cylinder Circle Fitting Mode Builder

-------------------------------------

Getter Method

Signature CylinderCircleFitModeBuilder

Returns:
Return type:NXOpen.CAM.InspectionCylinderCircleFitModeBuilder

New in version NX9.0.0.

License requirements: None.

ExtentType

InspectionConeFeatureBuilder.ExtentType

Returns or sets the extent type

-------------------------------------

Getter Method

Signature ExtentType

Returns:
Return type:NXOpen.CAM.CamInspectionOperationExtenttypes

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ExtentType

Parameters:extentType (NXOpen.CAM.CamInspectionOperationExtenttypes) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

IncludedAngle

InspectionConeFeatureBuilder.IncludedAngle

Returns or sets the included angle of the cone

-------------------------------------

Getter Method

Signature IncludedAngle

Returns:
Return type:float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature IncludedAngle

Parameters:includedAngle (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

InnerOuterType

InspectionConeFeatureBuilder.InnerOuterType

Returns or sets the inspection feature inner/outer type (hole/pin)

-------------------------------------

Getter Method

Signature InnerOuterType

Returns:
Return type:NXOpen.CAM.CamInspectionOperationInneroutertypes

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature InnerOuterType

Parameters:innerOuterType (NXOpen.CAM.CamInspectionOperationInneroutertypes) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

Name

InspectionConeFeatureBuilder.Name

Returns or sets the name

-------------------------------------

Getter Method

Signature Name

Returns:
Return type:str

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Name

Parameters:name (str) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

SelectedCone

InspectionConeFeatureBuilder.SelectedCone

Returns the selected cone

-------------------------------------

Getter Method

Signature SelectedCone

Returns:
Return type:NXOpen.SelectNXObject

New in version NX7.0.0.

License requirements: None.

VertexPointX

InspectionConeFeatureBuilder.VertexPointX

Returns or sets the vertex point X coordinate

-------------------------------------

Getter Method

Signature VertexPointX

Returns:
Return type:float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature VertexPointX

Parameters:vertexPointX (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

VertexPointY

InspectionConeFeatureBuilder.VertexPointY

Returns or sets the vertex point Y coordinate

-------------------------------------

Getter Method

Signature VertexPointY

Returns:
Return type:float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature VertexPointY

Parameters:vertexPointY (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

VertexPointZ

InspectionConeFeatureBuilder.VertexPointZ

Returns or sets the vertex point Z coordinate

-------------------------------------

Getter Method

Signature VertexPointZ

Returns:
Return type:float

New in version NX7.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature VertexPointZ

Parameters:vertexPointZ (float) –

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

Method Detail

UpdateParams

InspectionConeFeatureBuilder.UpdateParams

Updates cone inspection feature characteristic parameters based on selected geometry

Signature UpdateParams()

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

Validate

InspectionConeFeatureBuilder.Validate

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:Was self validation successful
Return type:bool

New in version NX3.0.1.

License requirements: None.