InspectionMoveCollection Class

class NXOpen.CAM.InspectionMoveCollection

Bases: object

Represents the Inspection move collection

To obtain an instance of this class, refer to NXOpen.CAM.InspectionOperation

New in version NX7.0.0.

Methods

Method	Description
CreateInspectionDeltaMoveBuilder	Create a CMM Inspection Delta Move sub-operation.
CreateInspectionLinear5axisMoveToPointBuilder	Create a CMM Inspection Linear 5axis Move To Point sub-operation.
CreateInspectionLinearMoveToPointBuilder	Create a CMM Inspection Linear Move To Point sub-operation.
CreateInspectionMeasurePointBuilder	Create a CMM Inspection Measure Point sub-operation.
CreateInspectionPolarGridBuilder	Create a CMM Inspection Polar Grid sub-operation.
CreateInspectionScanArcBuilder	Create a CMM Inspection Scan Arc sub-operation.
CreateInspectionScanCurve5axisBuilder	Create a CMM Inspection 5 Axis Scan Curve sub-operation.
CreateInspectionScanCurveBuilder	Create a CMM Inspection Scan Curve sub-operation.
CreateInspectionScanHelixBuilder	Create a CMM Inspection Scan Helix sub-operation.
CreateInspectionScanLineBuilder	Create a CMM Inspection Scan Line sub-operation.
CreateInspectionSensorMassEditBuilder	Create a CMM Inspection subop sensor mass edit dialog builder.
CreateInspectionUvgridBuilder	Create a CMM Inspection Rectangular UV Grid sub-operation.
FindObject	Finds the CAM.

Method Detail

CreateInspectionDeltaMoveBuilder

InspectionMoveCollection.CreateInspectionDeltaMoveBuilder

Create a CMM Inspection Delta Move sub-operation.

Signature CreateInspectionDeltaMoveBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection Delta Move Builder Return type:NXOpen.CAM.InspectionDeltaMoveBuilder

New in version NX7.5.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionLinear5axisMoveToPointBuilder

InspectionMoveCollection.CreateInspectionLinear5axisMoveToPointBuilder

Create a CMM Inspection Linear 5axis Move To Point sub-operation.

Signature CreateInspectionLinear5axisMoveToPointBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection Linear 5axis Move To Point Builder Return type:NXOpen.CAM.InspectionLinear5axisMoveToPointBuilder

New in version NX8.5.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionLinearMoveToPointBuilder

InspectionMoveCollection.CreateInspectionLinearMoveToPointBuilder

Create a CMM Inspection Linear Move To Point sub-operation.

Signature CreateInspectionLinearMoveToPointBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection Linear Move To Point Builder Return type:NXOpen.CAM.InspectionLinearMoveToPointBuilder

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionMeasurePointBuilder

InspectionMoveCollection.CreateInspectionMeasurePointBuilder

Create a CMM Inspection Measure Point sub-operation.

Signature CreateInspectionMeasurePointBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection Measure Point Builder Return type:NXOpen.CAM.InspectionMeasurePointBuilder

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionPolarGridBuilder

InspectionMoveCollection.CreateInspectionPolarGridBuilder

Create a CMM Inspection Polar Grid sub-operation.

Signature CreateInspectionPolarGridBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection Polar Grid Builder Return type:NXOpen.CAM.InspectionPolarGridBuilder

New in version NX11.0.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionScanArcBuilder

InspectionMoveCollection.CreateInspectionScanArcBuilder

Create a CMM Inspection Scan Arc sub-operation.

Signature CreateInspectionScanArcBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection Scan Arc Builder Return type:NXOpen.CAM.InspectionScanArcBuilder

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionScanCurve5axisBuilder

InspectionMoveCollection.CreateInspectionScanCurve5axisBuilder

Create a CMM Inspection 5 Axis Scan Curve sub-operation.

Signature CreateInspectionScanCurve5axisBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection 5 Axis Scan Curve Builder Return type:NXOpen.CAM.InspectionScanCurve5AxisBuilder

New in version NX7.5.2.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionScanCurveBuilder

InspectionMoveCollection.CreateInspectionScanCurveBuilder

Create a CMM Inspection Scan Curve sub-operation.

Signature CreateInspectionScanCurveBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection Scan Curve Builder Return type:NXOpen.CAM.InspectionScanCurveBuilder

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionScanHelixBuilder

InspectionMoveCollection.CreateInspectionScanHelixBuilder

Create a CMM Inspection Scan Helix sub-operation.

Signature CreateInspectionScanHelixBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection Scan Helix Builder Return type:NXOpen.CAM.InspectionScanHelixBuilder

New in version NX8.5.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionScanLineBuilder

InspectionMoveCollection.CreateInspectionScanLineBuilder

Create a CMM Inspection Scan Line sub-operation.

Signature CreateInspectionScanLineBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection Scan Line Builder Return type:NXOpen.CAM.InspectionScanLineBuilder

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionSensorMassEditBuilder

InspectionMoveCollection.CreateInspectionSensorMassEditBuilder

Create a CMM Inspection subop sensor mass edit dialog builder.

Signature CreateInspectionSensorMassEditBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:Inspection Subop Sensor Mass Edit builder created Return type:NXOpen.CAM.InspectionSensorMassEditBuilder

New in version NX7.5.3.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

CreateInspectionUvgridBuilder

InspectionMoveCollection.CreateInspectionUvgridBuilder

Create a CMM Inspection Rectangular UV Grid sub-operation.

Signature CreateInspectionUvgridBuilder(param)

Parameters:param (NXOpen.CAM.InspectionMoveSubop) – Inspection Move object Returns:CMM Inspection UV Grid Builder Return type:NXOpen.CAM.InspectionUVGridBuilder

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)

FindObject

InspectionMoveCollection.FindObject

Finds the CAM.

InspectionMoveSubop object with the given identifier as recorded in a journal.

Signature FindObject(sid)

Parameters:sid (str) – the name of the object Returns:the found object Return type:NXOpen.CAM.InspectionMoveSubop

New in version NX7.0.0.

License requirements: insp_programming (“INSPECTION PROGRAMMING”)