MillingToolBuilder Class¶

class NXOpen.CAM.MillingToolBuilder¶

Bases: NXOpen.CAM.ToolBuilder

Represents a MillingTool Builder

This is an abstract class, and cannot be instantiated.

New in version NX5.0.0.

Properties¶

Property	Description
ChannelName	Returns or sets the channel’s name
CoolantThrough	Returns or sets the coolant through parameter
CutterExportBuilder	Returns the cutter export builder
CycleEvent	Returns the cycle event
CycleTable	Returns the cycle
Description	Returns or sets the description
EndUdeSet	Returns the end ude set
HelicalDiameter	Returns the helical diameter
HelicalRampAngle	Returns the ramp angle
HolderDescription	Returns or sets the holder description
HolderLibraryReference	Returns or sets the holder libref
HolderSectionBuilder	Returns the holder sections builder
LibraryParametersBuilder	Returns the Library Data Object
MaxCutWidth	Returns the max cut width
MillingTrackpointBuilder	Returns the mill trackpoint builder
MinRampLength	Returns the min ramp length
OptimizationMethod	Returns or sets the optim method
StartUdeSet	Returns the start ude set
Tag	Returns the Tag for this object.
TaperedShankDiameterBuilder	Returns the tapered shank diameter
TaperedShankLengthBuilder	Returns the tapered shank length
TaperedShankTaperLengthBuilder	Returns the tapered shank taper length
TlAdjRegBuilder	Returns the Adjust Register
TlCtlgNum	Returns or sets the Catalog Number
TlCutcomReg	Returns or sets the Cutcom Register
TlCutcomRegBuilder	Returns the Cutcom Register Builder
TlDescription	Returns or sets the Cutter Description
TlDiameterBuilder	Returns the Tool Diameter builder (inheritable double)
TlDirection	Returns or sets the tool direction
TlFluteLnBuilder	Returns the flute length
TlHeightBuilder	Returns the length
TlHolderDescription	Returns or sets the Holder Description
TlHolderLibref	Returns or sets the Holder Library Reference
TlHolderNumberBuilder	Returns the Holder Number
TlLibref	Returns or sets the Cutter Libref
TlLowCorRadBuilder	Returns the low corner radius
TlManualToolChange	Returns or sets the Manual Tool Change
TlNumFlutesBuilder	Returns the Number of Flutes builder (inheritable integer)
TlNumberBuilder	Returns the Tool Number
TlShankDiaBuilder	Returns the Shank Diameter builder (inheritable double)
TlTaperAngBuilder	Returns the Taper Angle builder (inheritable double)
TlText	Returns or sets the tool text
TlUpCorRadBuilder	Returns the up corner radius
TlZMountBuilder	Returns the Z Mount builder (inheritable double)
TlZOffsetBuilder	Returns the Z Offset builder (inheritable double)
UseTaperedShank	Returns or sets the use tapered shank

Methods¶

Method	Description
Commit	Commits any edits that have been applied to the builder.
Destroy	Deletes the builder, and cleans up any objects created by the builder.
GetCommittedObjects	For builders that create more than one object, this method returns the objects that are created by commit.
GetCustomizableItemBuilder	Returns the customizable item builder for the given customizable item name
GetCustomizableItemNames	Returns the names for all customizable item ids
GetMaterial	Get tool material
GetMaterialData	Get material data
GetObject	Returns the object currently being edited by this builder.
SetMaterial	Set tool material
ShowResults	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations¶

MillingToolBuilderToolDirectionTypes Enumeration

Available types for tool direction milling tool

Property Detail¶

CoolantThrough¶

MillingToolBuilder.CoolantThrough¶

Returns or sets the coolant through parameter

-------------------------------------

Getter Method

Signature CoolantThrough

Returns:	the coolant through
Return type:	bool

New in version NX7.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature CoolantThrough

Parameters:	coolantThrough (bool) – the coolant through

New in version NX7.5.0.

License requirements: None.

HelicalDiameter¶

MillingToolBuilder.HelicalDiameter¶

Returns the helical diameter

-------------------------------------

Getter Method

Signature HelicalDiameter

Returns:
Return type:	`NXOpen.CAM.InheritableToolDepBuilder`

New in version NX8.0.0.

License requirements: None.

HelicalRampAngle¶

MillingToolBuilder.HelicalRampAngle¶

Returns the ramp angle

-------------------------------------

Getter Method

Signature HelicalRampAngle

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX8.0.0.

License requirements: None.

HolderSectionBuilder¶

MillingToolBuilder.HolderSectionBuilder¶

Returns the holder sections builder

-------------------------------------

Getter Method

Signature HolderSectionBuilder

Returns:
Return type:	`NXOpen.CAM.HolderSectionBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

MaxCutWidth¶

MillingToolBuilder.MaxCutWidth¶

Returns the max cut width

-------------------------------------

Getter Method

Signature MaxCutWidth

Returns:
Return type:	`NXOpen.CAM.InheritableToolDepBuilder`

New in version NX8.0.0.

License requirements: None.

MillingTrackpointBuilder¶

MillingToolBuilder.MillingTrackpointBuilder¶

Returns the mill trackpoint builder

-------------------------------------

Getter Method

Signature MillingTrackpointBuilder

Returns:
Return type:	`NXOpen.CAM.MillingTrackpointBuilder`

New in version NX6.0.0.

License requirements: cam_base (“CAM BASE”)

MinRampLength¶

MillingToolBuilder.MinRampLength¶

Returns the min ramp length

-------------------------------------

Getter Method

Signature MinRampLength

Returns:
Return type:	`NXOpen.CAM.InheritableToolDepBuilder`

New in version NX8.0.0.

License requirements: None.

TaperedShankDiameterBuilder¶

MillingToolBuilder.TaperedShankDiameterBuilder¶

Returns the tapered shank diameter

-------------------------------------

Getter Method

Signature TaperedShankDiameterBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX8.0.0.

License requirements: None.

TaperedShankLengthBuilder¶

MillingToolBuilder.TaperedShankLengthBuilder¶

Returns the tapered shank length

-------------------------------------

Getter Method

Signature TaperedShankLengthBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX8.0.0.

License requirements: None.

TaperedShankTaperLengthBuilder¶

MillingToolBuilder.TaperedShankTaperLengthBuilder¶

Returns the tapered shank taper length

-------------------------------------

Getter Method

Signature TaperedShankTaperLengthBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX8.0.0.

License requirements: None.

TlAdjRegBuilder¶

MillingToolBuilder.TlAdjRegBuilder¶

Returns the Adjust Register

-------------------------------------

Getter Method

Signature TlAdjRegBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: None.

TlCutcomReg¶

MillingToolBuilder.TlCutcomReg¶

Returns or sets the Cutcom Register

-------------------------------------

Getter Method

Signature TlCutcomReg

Returns:	the tool cutcom register value
Return type:	int

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TlCutcomReg

Parameters:	tlCutcomRegValue (int) – the tool cutcom register value

New in version NX5.0.0.

License requirements: None.

TlCutcomRegBuilder¶

MillingToolBuilder.TlCutcomRegBuilder¶

Returns the Cutcom Register Builder

-------------------------------------

Getter Method

Signature TlCutcomRegBuilder

Returns:	the tool cutcom register value
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX6.0.0.

License requirements: None.

TlDiameterBuilder¶

MillingToolBuilder.TlDiameterBuilder¶

Returns the Tool Diameter builder (inheritable double)

-------------------------------------

Getter Method

Signature TlDiameterBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

TlDirection¶

MillingToolBuilder.TlDirection¶

Returns or sets the tool direction

-------------------------------------

Getter Method

Signature TlDirection

Returns:
Return type:	`NXOpen.CAM.MillingToolBuilderToolDirectionTypes`

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TlDirection

Parameters:	tlDirection (`NXOpen.CAM.MillingToolBuilderToolDirectionTypes`) –

New in version NX5.0.0.

License requirements: None.

TlFluteLnBuilder¶

MillingToolBuilder.TlFluteLnBuilder¶

Returns the flute length

-------------------------------------

Getter Method

Signature TlFluteLnBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

TlHeightBuilder¶

MillingToolBuilder.TlHeightBuilder¶

Returns the length

-------------------------------------

Getter Method

Signature TlHeightBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

TlHolderDescription¶

MillingToolBuilder.TlHolderDescription¶

Returns or sets the Holder Description

-------------------------------------

Getter Method

Signature TlHolderDescription

Returns:	the tool holder description value
Return type:	str

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TlHolderDescription

Parameters:	tlHolderDescriptionValue (str) – the tool holder description value

New in version NX5.0.0.

License requirements: None.

TlHolderLibref¶

MillingToolBuilder.TlHolderLibref¶

Returns or sets the Holder Library Reference

-------------------------------------

Getter Method

Signature TlHolderLibref

Returns:	the holder Library Reference value
Return type:	str

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TlHolderLibref

Parameters:	tlHolderLibrefValue (str) – the holder Library Reference value

New in version NX5.0.0.

License requirements: None.

TlLowCorRadBuilder¶

MillingToolBuilder.TlLowCorRadBuilder¶

Returns the low corner radius

-------------------------------------

Getter Method

Signature TlLowCorRadBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

TlNumFlutesBuilder¶

MillingToolBuilder.TlNumFlutesBuilder¶

Returns the Number of Flutes builder (inheritable integer)

-------------------------------------

Getter Method

Signature TlNumFlutesBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableIntBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

TlShankDiaBuilder¶

MillingToolBuilder.TlShankDiaBuilder¶

Returns the Shank Diameter builder (inheritable double)

-------------------------------------

Getter Method

Signature TlShankDiaBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

TlTaperAngBuilder¶

MillingToolBuilder.TlTaperAngBuilder¶

Returns the Taper Angle builder (inheritable double)

-------------------------------------

Getter Method

Signature TlTaperAngBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

TlUpCorRadBuilder¶

MillingToolBuilder.TlUpCorRadBuilder¶

Returns the up corner radius

-------------------------------------

Getter Method

Signature TlUpCorRadBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

TlZMountBuilder¶

MillingToolBuilder.TlZMountBuilder¶

Returns the Z Mount builder (inheritable double)

-------------------------------------

Getter Method

Signature TlZMountBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

TlZOffsetBuilder¶

MillingToolBuilder.TlZOffsetBuilder¶

Returns the Z Offset builder (inheritable double)

-------------------------------------

Getter Method

Signature TlZOffsetBuilder

Returns:
Return type:	`NXOpen.CAM.InheritableDoubleBuilder`

New in version NX5.0.0.

License requirements: cam_base (“CAM BASE”)

UseTaperedShank¶

MillingToolBuilder.UseTaperedShank¶

Returns or sets the use tapered shank

-------------------------------------

Getter Method

Signature UseTaperedShank

Returns:	tapered shank used
Return type:	bool

New in version NX8.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature UseTaperedShank

Parameters:	useTaperedShank (bool) – use tapered shank

New in version NX8.0.0.

License requirements: cam_base (“CAM BASE”)

Method Detail¶

Validate¶

MillingToolBuilder.Validate¶

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:	Was self validation successful
Return type:	bool

New in version NX3.0.1.

License requirements: None.

MillingToolBuilder Class¶

Properties¶

Methods¶

Enumerations¶

Property Detail¶

CoolantThrough¶

HelicalDiameter¶

HelicalRampAngle¶

HolderSectionBuilder¶

MaxCutWidth¶

MillingTrackpointBuilder¶

MinRampLength¶

TaperedShankDiameterBuilder¶

TaperedShankLengthBuilder¶

TaperedShankTaperLengthBuilder¶

TlAdjRegBuilder¶

TlCutcomReg¶

TlCutcomRegBuilder¶

TlDiameterBuilder¶

TlDirection¶

TlFluteLnBuilder¶

TlHeightBuilder¶

TlHolderDescription¶

TlHolderLibref¶

TlLowCorRadBuilder¶

TlNumFlutesBuilder¶

TlShankDiaBuilder¶

TlTaperAngBuilder¶

TlUpCorRadBuilder¶

TlZMountBuilder¶

TlZOffsetBuilder¶

UseTaperedShank¶

Method Detail¶

Validate¶

NXOpen Python API Reference

Navigation

Related Topics