ProbeInspectBorebossMoveBuilder Class

class NXOpen.CAM.ProbeInspectBorebossMoveBuilder

Bases: NXOpen.CAM.MoveBuilder

Represents the Probe Inspect Bore Boss Move Builder

To create a new instance of this class, use NXOpen.CAM.MoveCollection.CreateProbeInspectBorebossMoveBuilder()

New in version NX5.0.0.

Properties

Property Description
Angle1 Returns or sets the 1st custom angle to probe at
Angle2 Returns or sets the 2nd custom angle to probe at
Angle3 Returns or sets the 3rd custom angle to probe at
AngleType Returns or sets the angle type
ArcVector Returns or sets the arc vector defining the cylinder to inspect
BossDimension Returns or sets the radial clearance from nominal target surface
CycleType Returns or sets the cycle type
Cylinder Returns or sets the cylinder to inspect
DepthType Returns or sets the depth type
Diameter Returns or sets the diameter defining the cylinder to probe
FeedRate Returns or sets the feed rate
FeedType Returns or sets the feed type
FeedUnit Returns or sets the feed unit
GeometryType Returns or sets the geometry type
MeasurementDepth Returns or sets the probing depth
MotionType Returns or sets the motion type
NumberOfUserParameters Returns the number of user parameters
Point Returns or sets the point defining the cylinder to inspect
ProbeControlParameters Returns the probe control parameters builder
ProbeProtectedParameters Returns the probe protected parameters builder
ProbeStockParameters Returns the probe stock parameters builder
ProbeToleranceParameters Returns the probe tolerance parameters builder
ProtectedMove Returns or sets the protected move status
SubopLabel Returns or sets the subop label
Tag Returns the Tag for this object.

Methods

Method Description
Commit Commits any edits that have been applied to the builder.
Destroy Deletes the builder, and cleans up any objects created by the builder.
GetCommittedObjects For builders that create more than one object, this method returns the objects that are created by commit.
GetObject Returns the object currently being edited by this builder.
GetUserParameter Returns the custom parameter with the given name.
SetParent Set parent
SetSibling Set sibling
ShowResults Updates the model to reflect the result of an edit to the model for all builders that support showing results.
Validate Validate whether the inputs to the component are sufficient for commit to be called.

Property Detail

Angle1

ProbeInspectBorebossMoveBuilder.Angle1

Returns or sets the 1st custom angle to probe at

-------------------------------------

Getter Method

Signature Angle1

Returns:
Return type:float

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Angle1

Parameters:angle1 (float) –

New in version NX5.0.0.

License requirements: None.

Angle2

ProbeInspectBorebossMoveBuilder.Angle2

Returns or sets the 2nd custom angle to probe at

-------------------------------------

Getter Method

Signature Angle2

Returns:
Return type:float

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Angle2

Parameters:angle2 (float) –

New in version NX5.0.0.

License requirements: None.

Angle3

ProbeInspectBorebossMoveBuilder.Angle3

Returns or sets the 3rd custom angle to probe at

-------------------------------------

Getter Method

Signature Angle3

Returns:
Return type:float

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Angle3

Parameters:angle3 (float) –

New in version NX5.0.0.

License requirements: None.

AngleType

ProbeInspectBorebossMoveBuilder.AngleType

Returns or sets the angle type

-------------------------------------

Getter Method

Signature AngleType

Returns:
Return type:NXOpen.CAM.ProbeInspectBorebossMoveBuilderAngle

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AngleType

Parameters:angleType (NXOpen.CAM.ProbeInspectBorebossMoveBuilderAngle) –

New in version NX5.0.0.

License requirements: None.

ArcVector

ProbeInspectBorebossMoveBuilder.ArcVector

Returns or sets the arc vector defining the cylinder to inspect

-------------------------------------

Getter Method

Signature ArcVector

Returns:
Return type:NXOpen.NXObject

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ArcVector

Parameters:vector (NXOpen.NXObject) –

New in version NX5.0.0.

License requirements: None.

BossDimension

ProbeInspectBorebossMoveBuilder.BossDimension

Returns or sets the radial clearance from nominal target surface

-------------------------------------

Getter Method

Signature BossDimension

Returns:
Return type:float

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BossDimension

Parameters:radialClearance (float) –

New in version NX5.0.0.

License requirements: None.

CycleType

ProbeInspectBorebossMoveBuilder.CycleType

Returns or sets the cycle type

-------------------------------------

Getter Method

Signature CycleType

Returns:
Return type:NXOpen.CAM.ProbeInspectBorebossMoveBuilderCycle

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature CycleType

Parameters:cycleType (NXOpen.CAM.ProbeInspectBorebossMoveBuilderCycle) –

New in version NX5.0.0.

License requirements: None.

Cylinder

ProbeInspectBorebossMoveBuilder.Cylinder

Returns or sets the cylinder to inspect

-------------------------------------

Getter Method

Signature Cylinder

Returns:
Return type:NXOpen.NXObject

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Cylinder

Parameters:face (NXOpen.NXObject) –

New in version NX5.0.0.

License requirements: None.

DepthType

ProbeInspectBorebossMoveBuilder.DepthType

Returns or sets the depth type

-------------------------------------

Getter Method

Signature DepthType

Returns:
Return type:NXOpen.CAM.ProbeInspectBorebossMoveBuilderDepth

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DepthType

Parameters:depthType (NXOpen.CAM.ProbeInspectBorebossMoveBuilderDepth) –

New in version NX5.0.0.

License requirements: None.

Diameter

ProbeInspectBorebossMoveBuilder.Diameter

Returns or sets the diameter defining the cylinder to probe

-------------------------------------

Getter Method

Signature Diameter

Returns:
Return type:float

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Diameter

Parameters:diameter (float) –

New in version NX5.0.0.

License requirements: None.

GeometryType

ProbeInspectBorebossMoveBuilder.GeometryType

Returns or sets the geometry type

-------------------------------------

Getter Method

Signature GeometryType

Returns:
Return type:NXOpen.CAM.ProbeInspectBorebossMoveBuilderGeometry

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature GeometryType

Parameters:geomType (NXOpen.CAM.ProbeInspectBorebossMoveBuilderGeometry) –

New in version NX5.0.0.

License requirements: None.

MeasurementDepth

ProbeInspectBorebossMoveBuilder.MeasurementDepth

Returns or sets the probing depth

-------------------------------------

Getter Method

Signature MeasurementDepth

Returns:
Return type:float

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature MeasurementDepth

Parameters:measurementDepth (float) –

New in version NX5.0.0.

License requirements: None.

Point

ProbeInspectBorebossMoveBuilder.Point

Returns or sets the point defining the cylinder to inspect

-------------------------------------

Getter Method

Signature Point

Returns:
Return type:NXOpen.Point

New in version NX5.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Point

Parameters:point (NXOpen.Point) –

New in version NX5.0.0.

License requirements: None.

ProbeControlParameters

ProbeInspectBorebossMoveBuilder.ProbeControlParameters

Returns the probe control parameters builder

-------------------------------------

Getter Method

Signature ProbeControlParameters

Returns:
Return type:NXOpen.CAM.ProbeControlParametersBuilder

New in version NX5.0.0.

License requirements: None.

ProbeProtectedParameters

ProbeInspectBorebossMoveBuilder.ProbeProtectedParameters

Returns the probe protected parameters builder

-------------------------------------

Getter Method

Signature ProbeProtectedParameters

Returns:
Return type:NXOpen.CAM.ProbeProtectedParametersBuilder

New in version NX5.0.0.

License requirements: None.

ProbeStockParameters

ProbeInspectBorebossMoveBuilder.ProbeStockParameters

Returns the probe stock parameters builder

-------------------------------------

Getter Method

Signature ProbeStockParameters

Returns:
Return type:NXOpen.CAM.ProbeStockParametersBuilder

New in version NX5.0.0.

License requirements: None.

ProbeToleranceParameters

ProbeInspectBorebossMoveBuilder.ProbeToleranceParameters

Returns the probe tolerance parameters builder

-------------------------------------

Getter Method

Signature ProbeToleranceParameters

Returns:
Return type:NXOpen.CAM.ProbeToleranceParametersBuilder

New in version NX5.0.0.

License requirements: None.

Method Detail

Validate

ProbeInspectBorebossMoveBuilder.Validate

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:Was self validation successful
Return type:bool

New in version NX3.0.1.

License requirements: None.