DieCollection Class¶

class NXOpen.Die.DieCollection¶

Bases: object

Represents a Die Engineering/Design feature builder.

To obtain an instance of this class, refer to NXOpen.Features.FeatureCollection

New in version NX4.0.0.

Methods¶

Method	Description
CastRelief	Creates a cast relief feature builder `NXOpen.Die.CastReliefBuilder`.
ClampingSlot	Creates a clamping slot feature builder `NXOpen.Die.ClampingSlotBuilder`.
CompensateRoughData	Creates a `NXOpen.Die.CompensateRoughDataBuilder`.
CreateAddSurfBuilder	Creates a `NXOpen.Die.AddSurfBuilder`.
CreateAddendumSectionBuilder	Creates/Edits the addendum section builder.
CreateAddendumSectionUserDefinedBuilder	Creates a user defined addendum section builder.
CreateClearanceBuilder	Creates a clearance builder `NXOpen.Die.ClearanceBuilder`.
CreateDieAttribute	Creates a `NXOpen.Die.DieAttributesBuilder`.
CreateDieBoolean	Creates a `NXOpen.Die.DieBooleanBuilder`.
CreateDieDirection	Creates a `NXOpen.Die.DieDirectionBuilder`.
CreateDieLimits	Creates a `NXOpen.Die.DieLimitsBuilder`.
CreateDieLocation	Creates a `NXOpen.Die.DieLocationBuilder`.
CreateDieLocations	Creates a `NXOpen.Die.DieLocationsBuilder`.
CreateDiePlane	Creates a `NXOpen.Die.DiePlaneBuilder`.
CreateDrawBeadBuilder	Creates a draw bead builder `NXOpen.Die.DrawBeadBuilder`.
CreateFillAreaBuilder	Creates a fill area builder `NXOpen.Die.FillAreaBuilder`.
CreateFingerClearanceNotchBuilder	Creates a finger clearance notch builder `NXOpen.Die.FingerClearanceNotchBuilder`.
CreateHandlingCoreBuilder	Creates a handling core builder `NXOpen.Die.HandlingCoreBuilder`.
CreateMachineReliefBuilder	Creates a machine relief builder `NXOpen.Die.MachineReliefBuilder`.
CreateQuickBinderBuilder	Creates a `NXOpen.Die.QuickBinderBuilder`
CreateQuickBinderWrapBuilder	Creates a `NXOpen.Die.QuickBinderWrapBuilder`.
CreateSpringbackCompensationBuilder	Creates a springback compensation builder `NXOpen.Die.SpringbackCompensationBuilder`.
CreateTrimLineDevelopmentBuilder	Creates a `NXOpen.Die.TrimLineDevelopmentBuilder`.
CreateUncutRegionsBuilder	Creates a `NXOpen.Die.UncutRegionsBuilder`
DieShoe	Creates a die_shoe feature builder `NXOpen.Die.DieShoeBuilder`.
DrawDiePunch	Creates the draw die punch feature builder.
FaceSheet	Creates a `NXOpen.Die.FaceSheetBuilder`.
Fill	Creates/Edits the die area fill feature builder.
FlangeTask	Creates/Edits the flange task feature builder.
FormTask	Creates/Edits the form task feature builder.
Heelpost	Creates a heelpost feature builder `NXOpen.Die.HeelpostBuilder`.
Keyway	Creates a keyway feature builder `NXOpen.Die.KeywayBuilder`.
Lineup	Creates/Edits the die lineup feature builder.
OutputCurves	Creates/Edits the die output curves feature builder.
PierceTask	Creates/Edits the pierce task feature builder.
Rotor	Creates the die_rotor feature builder.
Steelinsert	Creates/Edits the steel insert feature builder.
TrimFlangeDieAssistant	Creates the trim/flange die assistant builder.
TrimTask	Creates/Edits the trim task feature builder.

Method Detail¶

CastRelief¶

DieCollection.CastRelief¶

Creates a cast relief feature builder NXOpen.Die.CastReliefBuilder.

Signature CastRelief(castRelief)

Parameters:	castRelief (`NXOpen.Die.CastRelief`) – `NXOpen.Die.CastRelief` to be edited.
Returns:
Return type:	`NXOpen.Die.CastReliefBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

ClampingSlot¶

DieCollection.ClampingSlot¶

Creates a clamping slot feature builder NXOpen.Die.ClampingSlotBuilder.

Signature ClampingSlot(clampingSlot)

Parameters:	clampingSlot (`NXOpen.Die.ClampingSlot`) – `NXOpen.Die.ClampingSlot` to be edited.
Returns:
Return type:	`NXOpen.Die.ClampingSlotBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

CompensateRoughData¶

DieCollection.CompensateRoughData¶

Creates a NXOpen.Die.CompensateRoughDataBuilder.

Signature CompensateRoughData(compensateRoughData)

Parameters:	compensateRoughData (`NXOpen.Features.CompensateRoughData`) – `NXOpen.Features.CompensateRoughData` to be edited.
Returns:
Return type:	`NXOpen.Die.CompensateRoughDataBuilder`

New in version NX6.0.0.

License requirements: die_engineering (“DIE ENGINEERING”)

CreateAddSurfBuilder¶

DieCollection.CreateAddSurfBuilder¶

Creates a NXOpen.Die.AddSurfBuilder.

Signature CreateAddSurfBuilder(addSurf)

Parameters:	addSurf (`NXOpen.Features.Feature`) – the AddSurf feature to be edited, None if create.
Returns:
Return type:	`NXOpen.Die.AddSurfBuilder`

New in version NX5.0.0.

License requirements: die_engineering (“DIE ENGINEERING”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

CreateAddendumSectionBuilder¶

DieCollection.CreateAddendumSectionBuilder¶

Creates/Edits the addendum section builder.

Signature CreateAddendumSectionBuilder(addSection)

Parameters:	addSection (`NXOpen.Features.Feature`) – the AddendumSection feature to be edited, None if create.
Returns:
Return type:	`NXOpen.Die.AddendumSectionBuilder`

New in version NX7.5.0.

License requirements: die_engineering (“DIE ENGINEERING”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

CreateAddendumSectionUserDefinedBuilder¶

DieCollection.CreateAddendumSectionUserDefinedBuilder¶

Creates a user defined addendum section builder.

Signature CreateAddendumSectionUserDefinedBuilder()

Returns:	User Defined Section builder.
Return type:	`NXOpen.Die.AddendumSectionUserDefinedBuilder`

New in version NX7.5.0.

License requirements: die_engineering (“DIE ENGINEERING”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

CreateClearanceBuilder¶

DieCollection.CreateClearanceBuilder¶

Creates a clearance builder NXOpen.Die.ClearanceBuilder.

Signature CreateClearanceBuilder(clearance)

Parameters:	clearance (`NXOpen.Die.Clearance`) – `NXOpen.Die.Clearance` to be edited.
Returns:
Return type:	`NXOpen.Die.ClearanceBuilder`

New in version NX7.5.0.

License requirements: ug_die_design (“Die Design”)

CreateDieAttribute¶

DieCollection.CreateDieAttribute¶

Creates a NXOpen.Die.DieAttributesBuilder.

Signature CreateDieAttribute()

Returns:
Return type:	`NXOpen.Die.DieAttributesBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

CreateDieBoolean¶

DieCollection.CreateDieBoolean¶

Creates a NXOpen.Die.DieBooleanBuilder.

Signature CreateDieBoolean()

Returns:
Return type:	`NXOpen.Die.DieBooleanBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

CreateDieDirection¶

DieCollection.CreateDieDirection¶

Creates a NXOpen.Die.DieDirectionBuilder.

Signature CreateDieDirection(feature)

Parameters:	feature (`NXOpen.Features.Feature`) – Parent NX Feature.
Returns:
Return type:	`NXOpen.Die.DieDirectionBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

CreateDieLimits¶

DieCollection.CreateDieLimits¶

Creates a NXOpen.Die.DieLimitsBuilder.

Signature CreateDieLimits()

Returns:
Return type:	`NXOpen.Die.DieLimitsBuilder`

New in version NX8.0.0.

License requirements: None.

CreateDieLocation¶

DieCollection.CreateDieLocation¶

Creates a NXOpen.Die.DieLocationBuilder.

Signature CreateDieLocation()

Returns:
Return type:	`NXOpen.Die.DieLocationBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

CreateDieLocations¶

DieCollection.CreateDieLocations¶

Creates a NXOpen.Die.DieLocationsBuilder.

Signature CreateDieLocations(feature, allowSelection, allowNewPoint, allowNewCoordinateSystem, allowNewVector, allowNewPlane, isRequired, allowMultipleSelection)

Parameters:	feature (`NXOpen.Features.Feature`) – Parent NX Feature. allowSelection (bool) – Is selection available? allowNewPoint (bool) – Is specify point available? allowNewCoordinateSystem (bool) – Is specify coordinate system available? allowNewVector (bool) – Is specify vector available? allowNewPlane (bool) – Is specify plane available? isRequired (bool) – Is it required that something be specified, or is everything optional? allowMultipleSelection (bool) – Can builder support multiple locations?
Returns:
Return type:	`NXOpen.Die.DieLocationsBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

CreateDiePlane¶

DieCollection.CreateDiePlane¶

Creates a NXOpen.Die.DiePlaneBuilder.

Signature CreateDiePlane(feature)

Parameters:	feature (`NXOpen.Features.Feature`) – Parent NX Feature.
Returns:
Return type:	`NXOpen.Die.DiePlaneBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

CreateDrawBeadBuilder¶

DieCollection.CreateDrawBeadBuilder¶

Creates a draw bead builder NXOpen.Die.DrawBeadBuilder.

Signature CreateDrawBeadBuilder(drawBead)

Parameters:	drawBead (`NXOpen.Die.DrawBead`) – `NXOpen.Die.DrawBead` to be edited.
Returns:
Return type:	`NXOpen.Die.DrawBeadBuilder`

New in version NX7.5.0.

License requirements: die_engineering (“DIE ENGINEERING”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

CreateFillAreaBuilder¶

DieCollection.CreateFillAreaBuilder¶

Creates a fill area builder NXOpen.Die.FillAreaBuilder.

Signature CreateFillAreaBuilder(fillArea)

Parameters:	fillArea (`NXOpen.Die.FillArea`) – `NXOpen.Die.FillArea` to be edited.
Returns:
Return type:	`NXOpen.Die.FillAreaBuilder`

New in version NX7.5.0.

License requirements: ug_die_design (“Die Design”)

CreateFingerClearanceNotchBuilder¶

DieCollection.CreateFingerClearanceNotchBuilder¶

Creates a finger clearance notch builder NXOpen.Die.FingerClearanceNotchBuilder.

Signature CreateFingerClearanceNotchBuilder(fingerClearanceNotch)

Parameters:	fingerClearanceNotch (`NXOpen.Die.FingerClearanceNotch`) – `NXOpen.Die.FingerClearanceNotch` to be edited.
Returns:
Return type:	`NXOpen.Die.FingerClearanceNotchBuilder`

New in version NX7.5.0.

License requirements: ug_die_design (“Die Design”)

CreateHandlingCoreBuilder¶

DieCollection.CreateHandlingCoreBuilder¶

Creates a handling core builder NXOpen.Die.HandlingCoreBuilder.

Signature CreateHandlingCoreBuilder(handlingCore)

Parameters:	handlingCore (`NXOpen.Die.HandlingCore`) – `NXOpen.Die.HandlingCore` to be edited.
Returns:
Return type:	`NXOpen.Die.HandlingCoreBuilder`

New in version NX7.5.0.

License requirements: ug_die_design (“Die Design”)

CreateMachineReliefBuilder¶

DieCollection.CreateMachineReliefBuilder¶

Creates a machine relief builder NXOpen.Die.MachineReliefBuilder.

Signature CreateMachineReliefBuilder(machineRelief)

Parameters:	machineRelief (`NXOpen.Die.MachineRelief`) – `NXOpen.Die.MachineRelief` to be edited.
Returns:
Return type:	`NXOpen.Die.MachineReliefBuilder`

New in version NX7.5.0.

License requirements: ug_die_design (“Die Design”)

CreateQuickBinderBuilder¶

DieCollection.CreateQuickBinderBuilder¶

Creates a NXOpen.Die.QuickBinderBuilder

Signature CreateQuickBinderBuilder(quickBinder)

Parameters:	quickBinder (`NXOpen.Features.QuickBinder`) – `NXOpen.Features.QuickBinder` to be edited
Returns:
Return type:	`NXOpen.Die.QuickBinderBuilder`

New in version NX7.5.0.

License requirements: die_engineering (“DIE ENGINEERING”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

CreateQuickBinderWrapBuilder¶

DieCollection.CreateQuickBinderWrapBuilder¶

Creates a NXOpen.Die.QuickBinderWrapBuilder.

Signature CreateQuickBinderWrapBuilder(quickBinderWrap)

Parameters:	quickBinderWrap (`NXOpen.Features.Feature`) – the QuickBinderWrap feature to be edited, None if create.
Returns:
Return type:	`NXOpen.Die.QuickBinderWrapBuilder`

New in version NX5.0.0.

License requirements: die_engineering (“DIE ENGINEERING”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

CreateSpringbackCompensationBuilder¶

DieCollection.CreateSpringbackCompensationBuilder¶

Creates a springback compensation builder NXOpen.Die.SpringbackCompensationBuilder.

Signature CreateSpringbackCompensationBuilder(springbackCompensation)

Parameters:	springbackCompensation (`NXOpen.Die.SpringbackCompensation`) – `NXOpen.Die.SpringbackCompensation` to be edited
Returns:
Return type:	`NXOpen.Die.SpringbackCompensationBuilder`

New in version NX7.5.0.

License requirements: die_engineering (“DIE ENGINEERING”) OR nx_freeform_2 (“advanced freeform modeling”)

CreateTrimLineDevelopmentBuilder¶

DieCollection.CreateTrimLineDevelopmentBuilder¶

Creates a NXOpen.Die.TrimLineDevelopmentBuilder.

Signature CreateTrimLineDevelopmentBuilder(trimLineDevelopment)

Parameters:	trimLineDevelopment (`NXOpen.Features.Feature`) – the TrimLineDevelopment feature to be edited, None if create.
Returns:
Return type:	`NXOpen.Die.TrimLineDevelopmentBuilder`

New in version NX6.0.0.

License requirements: die_engineering (“DIE ENGINEERING”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

CreateUncutRegionsBuilder¶

DieCollection.CreateUncutRegionsBuilder¶

Creates a NXOpen.Die.UncutRegionsBuilder

Signature CreateUncutRegionsBuilder()

Returns:
Return type:	`NXOpen.Die.UncutRegionsBuilder`

New in version NX7.5.0.

License requirements: None.

DieShoe¶

DieCollection.DieShoe¶

Creates a die_shoe feature builder NXOpen.Die.DieShoeBuilder.

Signature DieShoe(dieShoe)

Parameters:	dieShoe (`NXOpen.Die.DieShoe`) – `NXOpen.Die.DieShoe` to be edited.
Returns:
Return type:	`NXOpen.Die.DieShoeBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

DrawDiePunch¶

DieCollection.DrawDiePunch¶

Creates the draw die punch feature builder.

Signature DrawDiePunch(drawDiePunch)

Parameters:	drawDiePunch (`NXOpen.Features.Feature`) – Draw Die Punch to be edited, None if create.
Returns:	Draw Die Punch feature builder.
Return type:	`NXOpen.Die.DrawDiePunchBuilder`

New in version NX4.0.0.

License requirements: ug_die_design (“Die Design”)

FaceSheet¶

DieCollection.FaceSheet¶

Creates a NXOpen.Die.FaceSheetBuilder.

Signature FaceSheet(faceSheet)

Parameters:	faceSheet (`NXOpen.Features.Feature`) – `NXOpen.Die.FaceSheetBuilder` to be edited.
Returns:
Return type:	`NXOpen.Die.FaceSheetBuilder`

New in version NX5.0.0.

License requirements: die_engineering (“DIE ENGINEERING”)

Fill¶

DieCollection.Fill¶

Creates/Edits the die area fill feature builder.

Signature Fill(fill)

Parameters:	fill (`NXOpen.Features.Feature`) – area fill to be edited, None if create.
Returns:	area fill feature builder
Return type:	`NXOpen.Die.FillBuilder`

New in version NX4.0.0.

License requirements: die_engineering (“DIE ENGINEERING”)

FlangeTask¶

DieCollection.FlangeTask¶

Creates/Edits the flange task feature builder.

Signature FlangeTask(flangeTask)

Parameters:	flangeTask (`NXOpen.Features.Feature`) – Flange Task to be edited, None if create.
Returns:	Flange Task feature builder
Return type:	`NXOpen.Die.FlangeTaskBuilder`

New in version NX4.0.0.

License requirements: die_engineering (“DIE ENGINEERING”)

FormTask¶

DieCollection.FormTask¶

Creates/Edits the form task feature builder.

Signature FormTask(formTask)

Parameters:	formTask (`NXOpen.Features.Feature`) – Form Task to be edited, None if create.
Returns:	Form Task feature builder.
Return type:	`NXOpen.Die.FormTaskBuilder`

New in version NX4.0.0.

License requirements: die_engineering (“DIE ENGINEERING”)

Heelpost¶

DieCollection.Heelpost¶

Creates a heelpost feature builder NXOpen.Die.HeelpostBuilder.

Signature Heelpost(heelpost)

Parameters:	heelpost (`NXOpen.Die.Heelpost`) – `NXOpen.Die.Heelpost` to be edited.
Returns:
Return type:	`NXOpen.Die.HeelpostBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

Keyway¶

DieCollection.Keyway¶

Creates a keyway feature builder NXOpen.Die.KeywayBuilder.

Signature Keyway(keyway)

Parameters:	keyway (`NXOpen.Die.Keyway`) – `NXOpen.Die.Keyway` to be edited.
Returns:
Return type:	`NXOpen.Die.KeywayBuilder`

New in version NX6.0.0.

License requirements: ug_die_design (“Die Design”)

Lineup¶

DieCollection.Lineup¶

Creates/Edits the die lineup feature builder.

Signature Lineup(lineup)

Parameters:	lineup (`NXOpen.Features.Feature`) – lineup to be edited, None if create.
Returns:	lineup feature builder
Return type:	`NXOpen.Die.LineupBuilder`

New in version NX4.0.0.

License requirements: die_engineering (“DIE ENGINEERING”)

OutputCurves¶

DieCollection.OutputCurves¶

Creates/Edits the die output curves feature builder.

Signature OutputCurves(outcurves)

Parameters:	outcurves (`NXOpen.Features.Feature`) – output curves feature to be edited, None if create.
Returns:	output curves feature builder
Return type:	`NXOpen.Die.OutputCurvesBuilder`

New in version NX4.0.1.

License requirements: die_engineering (“DIE ENGINEERING”)

PierceTask¶

DieCollection.PierceTask¶

Creates/Edits the pierce task feature builder.

Signature PierceTask(pierceTask)

Parameters:	pierceTask (`NXOpen.Features.Feature`) – Pierce Task to be edited, None if create.
Returns:	Pierce Task feature builder
Return type:	`NXOpen.Die.PierceTaskBuilder`

New in version NX4.0.0.

License requirements: die_engineering (“DIE ENGINEERING”)

Rotor¶

DieCollection.Rotor¶

Creates the die_rotor feature builder.

Signature Rotor(rotor)

Parameters:	rotor (`NXOpen.Features.Feature`) – Die Rotor to be edited, None if create.
Returns:	Die Rotor feature builder.
Return type:	`NXOpen.Die.RotorBuilder`

New in version NX4.0.0.

License requirements: ug_die_design (“Die Design”)

Steelinsert¶

DieCollection.Steelinsert¶

Creates/Edits the steel insert feature builder.

Signature Steelinsert(steelInsert)

Parameters:	steelInsert (`NXOpen.Features.Feature`) – Steel Insert to be edited, None if create.
Returns:	Steel Insert feature builder
Return type:	`NXOpen.Die.SteelInsertBuilder`

New in version NX4.0.0.

License requirements: ug_die_design (“Die Design”)

TrimFlangeDieAssistant¶

DieCollection.TrimFlangeDieAssistant¶

Creates the trim/flange die assistant builder.

Signature TrimFlangeDieAssistant(nullFeature)

Parameters:	nullFeature (`NXOpen.Features.Feature`) – must be None to create trim die.
Returns:	Trim/Flange Die Assistant builder
Return type:	`NXOpen.Die.TrimFlangeDieAssistantBuilder`

New in version NX5.0.0.

License requirements: ug_die_design (“Die Design”)

TrimTask¶

DieCollection.TrimTask¶

Creates/Edits the trim task feature builder.

Signature TrimTask(trimTask)

Parameters:	trimTask (`NXOpen.Features.Feature`) – Trim Task to be edited, None if create.
Returns:	Trim Task feature builder
Return type:	`NXOpen.Die.TrimTaskBuilder`

New in version NX4.0.0.

License requirements: die_engineering (“DIE ENGINEERING”)