HolePackageBuilder Class¶

class NXOpen.Features.HolePackageBuilder¶

Bases: NXOpen.Features.FeatureBuilder

Represents a NXOpen.Features.HolePackage builder.

Inputs to this class can be convergent objects. To create a new instance of this class, use NXOpen.Features.FeatureCollection.CreateHolePackageBuilder()

Default values.

Property	Value
BooleanOperation.Type	Subtract
DepthOption	ToCylinderBottom
DrillSizeEndChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
DrillSizeEndChamferEnabled	true
DrillSizeEndChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
DrillSizeHoleDepth.Value	50.0 (millimeters part), 2.0 (inches part)
DrillSizeHoleDiameter.Value	11.0 (millimeters part), 0.4 (inches part)
DrillSizeStartChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
DrillSizeStartChamferEnabled	true
DrillSizeStartChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
DrillSizeTipAngle.Value	118
EndHoleData.BooleanOperation.Type	Subtract
EndHoleData.DepthOption	ToCylinderBottom
EndHoleData.HoleDepth.Value	50.0 (millimeters part), 2.0 (inches part)
EndHoleData.HoleDiameter.Value	25.0 (millimeters part), 1.0 (inches part)
EndHoleData.MatchDimOfStartHole	true
EndHoleData.ScrewClearanceEndChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
EndHoleData.ScrewClearanceEndChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
EndHoleData.ScrewClearanceStartChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
EndHoleData.ScrewClearanceStartChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
EndHoleData.TapDrillDiameter.Value	8.5 (millimeters part), 0.34 (inches part)
EndHoleData.ThreadDepth.Value	25.0 (millimeters part), 1.0 (inches part)
EndHoleData.ThreadLengthOption	Custom
EndHoleData.ThreadedEndChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
EndHoleData.ThreadedEndChamferDiameter.Value	10.0 (millimeters part), 0.4 (inches part)
EndHoleData.ThreadedReliefAngle.Value	118.0 (millimeters part), 118.0 (inches part)
EndHoleData.ThreadedReliefChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
EndHoleData.ThreadedReliefChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
EndHoleData.ThreadedReliefDepth.Value	5.0 (millimeters part), 0.2 (inches part)
EndHoleData.ThreadedReliefDiameter.Value	10.0 (millimeters part), 0.4 (inches part)
EndHoleData.ThreadedStartChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
EndHoleData.ThreadedStartChamferDiameter.Value	10.0 (millimeters part), 0.4 (inches part)
EndHoleData.TipAngle.Value	118
GeneralCounterboreDepth.Value	25.0 (millimeters part), 1.0 (inches part)
GeneralCounterboreDiameter.Value	38.0 (millimeters part), 1.5 (inches part)
GeneralCounterboreHoleDepth.Value	50.0 (millimeters part), 2.0 (inches part)
GeneralCounterboreHoleDiameter.Value	25.0 (millimeters part), 1.0 (inches part)
GeneralCountersinkAngle.Value	90 (millimeters part), 82 (inches part)
GeneralCountersinkDiameter.Value	50.0 (millimeters part), 2.0 (inches part)
GeneralCountersinkHoleDepth.Value	50.0 (millimeters part), 2.0 (inches part)
GeneralCountersinkHoleDiameter.Value	25.0 (millimeters part), 1.0 (inches part)
GeneralHoleForm	Simple
GeneralSimpleHoleDepth.Value	50.0 (millimeters part), 2.0 (inches part)
GeneralSimpleHoleDiameter.Value	25.0 (millimeters part), 1.0 (inches part)
GeneralTaperAngle.Value	10
GeneralTaperedHoleDepth.Value	50.0 (millimeters part), 2.0 (inches part)
GeneralTaperedHoleDiameter.Value	25.0 (millimeters part), 1.0 (inches part)
GeneralTipAngle.Value	118 (millimeters part), 118 (inches part)
MiddleHoleData.BooleanOperation.Type	Subtract
MiddleHoleData.EndChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
MiddleHoleData.EndChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
MiddleHoleData.HoleDiameter.Value	25.0 (millimeters part), 1.0 (inches part)
MiddleHoleData.MatchDimOfStartHole	true
MiddleHoleData.StartChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
MiddleHoleData.StartChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
ScrewClearanceCounterboreDepth.Value	10.8 (millimeters part), 0.43 (inches part)
ScrewClearanceCounterboreDiameter.Value	18.0 (millimeters part), 0.72 (inches part)
ScrewClearanceCountersinkAngle.Value	90 (millimeters part), 82 (inches part)
ScrewClearanceCountersinkDiameter.Value	22.73 (millimeters part), 0.91 (inches part)
ScrewClearanceEndChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
ScrewClearanceEndChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
ScrewClearanceHoleDepth.Value	50.0 (millimeters part), 2.0 (inches part)
ScrewClearanceHoleDiameter.Value	11.0 (millimeters part), 0.4 (inches part)
ScrewClearanceHoleForm	Simple
ScrewClearanceNeckChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
ScrewClearanceNeckChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
ScrewClearanceReliefDepth.Value	1.2 (millimeters part), 0.05 (inches part)
ScrewClearanceStartChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
ScrewClearanceStartChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
ScrewClearanceTipAngle.Value	118
StartExtensionEnabled	True
StartHoleData.BooleanOperation.Type	Subtract
StartHoleData.CounterboreDepth.Value	25.0 (millimeters part), 1.0 (inches part)
StartHoleData.CounterboreDiameter.Value	38.0 (millimeters part), 1.5 (inches part)
StartHoleData.CountersinkAngle.Value	90 (millimeters part), 82 (inches part)
StartHoleData.CountersinkDiameter.Value	50.0 (millimeters part), 2.0 (inches part)
StartHoleData.EndChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
StartHoleData.EndChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
StartHoleData.HoleDiameter.Value	25.0 (millimeters part), 1.0 (inches part)
StartHoleData.HoleForm	Simple
StartHoleData.NeckChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
StartHoleData.NeckChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
StartHoleData.ReliefDepth.Value	1.2 (millimeters part), 0.05 (inches part)
StartHoleData.StartChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
StartHoleData.StartChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
TapDrillDiameter.Value	8.5 (millimeters part), 0.34 (inches part)
ThreadDepth.Value	25.0 (millimeters part), 1.0 (inches part)
ThreadLengthOption	Custom
ThreadRotation	Right
ThreadedEndChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
ThreadedEndChamferDiameter.Value	10.0 (millimeters part), 0.4 (inches part)
ThreadedHoleDepth.Value	50.0 (millimeters part), 2.0 (inches part)
ThreadedReliefAngle.Value	118.0 (millimeters part), 118.0 (inches part)
ThreadedReliefChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
ThreadedReliefChamferOffset.Value	0.6 (millimeters part), 0.024 (inches part)
ThreadedReliefDepth.Value	5.0 (millimeters part), 0.2 (inches part)
ThreadedReliefDiameter.Value	10.0 (millimeters part), 0.4 (inches part)
ThreadedStartChamferAngle.Value	45.0 (millimeters part), 45.0 (inches part)
ThreadedStartChamferDiameter.Value	10.0 (millimeters part), 0.4 (inches part)
ThreadedTipAngle.Value	118 (millimeters part), 118 (inches part)
Type	GeneralHole

New in version NX5.0.2.

Properties¶

Property	Description
BooleanOperation	Returns the boolean operation
DepthOption	Returns or sets the hole depth option
DrillSize	Returns or sets the drill size - this is applicable for drill size hole
DrillSizeEndChamferAngle	Returns the drill size end chamfer angle - this is applicable for drill size hole type
DrillSizeEndChamferEnabled	Returns or sets the drill size end chamfer enabled - this is applicable for drill size hole type
DrillSizeEndChamferOffset	Returns the drill size end chamfer offset - this is applicable for drill size hole type
DrillSizeFitOption	Returns or sets the drill size screw fit Option - this is applicable for drill size hole
DrillSizeHoleDepth	Returns the hole depth - this is applicable for drill size hole
DrillSizeHoleDiameter	Returns the hole diameter - this is applicable for drill size hole
DrillSizeStandard	Returns or sets the drill size standard - this is applicable for drill size hole type
DrillSizeStartChamferAngle	Returns the drill size start chamfer angle - this is applicable for drill size hole type
DrillSizeStartChamferEnabled	Returns or sets the drill size start chamfer enabled - this is applicable for drill size hole type
DrillSizeStartChamferOffset	Returns the drill size start chamfer offset - this is applicable for drill size hole type
DrillSizeTipAngle	Returns the tip angle - this is applicable for drill size hole
EndHoleData	Returns the target body
GeneralCounterboreDepth	Returns the counter bore depth - this is applicable for general hole
GeneralCounterboreDiameter	Returns the counter bore diameter - this is applicable for general hole
GeneralCounterboreHoleDepth	Returns the counterbore hole depth - this is applicable for general hole counterbore form
GeneralCounterboreHoleDiameter	Returns the counterbore hole diameter - this is applicable for general hole counterbore form
GeneralCountersinkAngle	Returns the counter sink angle - this is applicable for general hole
GeneralCountersinkDiameter	Returns the counter sink diameter - this is applicable for general hole
GeneralCountersinkHoleDepth	Returns the countersink hole depth - this is applicable for general hole countersink form
GeneralCountersinkHoleDiameter	Returns the countersink hole diameter - this is applicable for general hole countersink form
GeneralHoleForm	Returns or sets the hole form - this is applicable for general hole
GeneralSimpleHoleDepth	Returns the simple hole depth - this is applicable for general hole simple form
GeneralSimpleHoleDiameter	Returns the simple hole diameter - this is applicable for general hole simple form
GeneralTaperAngle	Returns the taper angle - this is applicable for general hole
GeneralTaperedHoleDepth	Returns the tapered hole depth - this is applicable for general hole tapered form
GeneralTaperedHoleDiameter	Returns the tapered hole diameter - this is applicable for general hole tapered form
GeneralTipAngle	Returns the tip angle - this is applicable for general hole
HoleDepthLimitOption	Returns or sets the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type
HolePosition	Returns the hole position
MiddleHoleData	Returns the target body
NeckChamferEnabled	Returns or sets the neck chamfer enabled - this is applicable for screw clearence hole type with counterbore hole form
ParentFeatureInternal	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal
PatchSolutionFlag	Returns or sets the patch solution flag
PatchSurfaceFilename	Returns or sets the patch surface filename
ProjectionDirection	Returns the hole direction options
RadialEngageOption	Returns or sets the radial engage option - this is applicable for screw clearence hole
ReliefChamferEnabled	Returns or sets the threaded relief chamfer enabled - this is applicable for threaded hole type
ScrewClearanceCounterboreDepth	Returns the counter bore depth - this is applicable for screw clearence hole
ScrewClearanceCounterboreDiameter	Returns the counter bore diameter - this is applicable for screw clearence hole
ScrewClearanceCountersinkAngle	Returns the counter sink angle - this is applicable for screw clearence hole
ScrewClearanceCountersinkDiameter	Returns the counter sink diameter - this is applicable for screw clearence hole
ScrewClearanceEndChamferAngle	Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type
ScrewClearanceEndChamferEnabled	Returns or sets the end chamfer enabled - this is applicable for screw clearance hole type
ScrewClearanceEndChamferOffset	Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type
ScrewClearanceHoleDepth	Returns the hole depth - this is applicable for screw clearance hole
ScrewClearanceHoleDiameter	Returns the hole diameter - this is applicable for screw clearence hole
ScrewClearanceHoleForm	Returns or sets the hole form - this is applicable for screw clearance hole
ScrewClearanceNeckChamferAngle	Returns the neck chamfer angle - this is applicable for screw clearence hole type with counterbore hole form
ScrewClearanceNeckChamferOffset	Returns the neck chamfer offset - this is applicable for screw clearence hole type with counterbore hole form
ScrewClearanceReliefDepth	Returns the relief depth - this is applicable for screw clearence hole type
ScrewClearanceReliefEnabled	Returns or sets the relief enabled - this is applicable for screw clearence hole type with countersunk hole form and threaded hole type
ScrewClearanceStartChamferAngle	Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type
ScrewClearanceStartChamferEnabled	Returns or sets the screw clearance start chamfer enabled - this is applicable for screw clearance hole type
ScrewClearanceStartChamferOffset	Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type
ScrewClearanceTipAngle	Returns the tip angle - this is applicable for screw clearance hole
ScrewFitOption	Returns or sets the screw fit Option - this is applicable for screw clearence hole
ScrewSize	Returns or sets the screw size - this is applicable for screw clearence hole
ScrewStandard	Returns or sets the screw standard - this is applicable for screw clearence hole type
ScrewType	Returns or sets the screw type - this is applicable for screw clearence hole
StartExtensionEnabled	Returns or sets the extend start enabled - this is applicable for start extension to all hole types
StartHoleData	Returns the start target body
SurroundingPatchSurfaceFilename	Returns or sets the surrounding patch surface filename
Tag	Returns the Tag for this object.
TapDrillDiameter	Returns the tap drill diameter - this is applicable for threaded hole
ThreadDepth	Returns the thread depth - this is applicable for threaded hole
ThreadLengthOption	Returns or sets the thread length option - this is applicable for threaded hole
ThreadRotation	Returns or sets the thread rotation - this is applicable for threaded hole
ThreadSize	Returns or sets the thread size - this is applicable for threaded hole
ThreadStandard	Returns or sets the thread standard - this is applicable for threaded hole type
ThreadedEndChamferAngle	Returns the threaded end chamfer angle - this is applicable for threaded hole type
ThreadedEndChamferDiameter	Returns the threaded end chamfer offset - this is applicable for threaded hole type
ThreadedEndChamferEnabled	Returns or sets the threaded end chamfer enabled - this is applicable for threaded hole type
ThreadedHoleDepth	Returns the hole depth - this is applicable for threaded hole
ThreadedReliefAngle	Returns the relief angle - this is applicable for threaded hole type
ThreadedReliefChamferAngle	Returns the threaded relief chamfer angle - this is applicable for threaded hole type
ThreadedReliefChamferOffset	Returns the threaded relief chamfer offset - this is applicable for threaded hole type
ThreadedReliefDepth	Returns the threaded relief depth - this is applicable for threaded hole type
ThreadedReliefDiameter	Returns the relief diameter - this is applicable for threaded hole type
ThreadedReliefEnabled	Returns or sets the threaded relief enabled - this is applicable for threaded hole type
ThreadedStartChamferAngle	Returns the threaded start chamfer angle - this is applicable for threaded hole type
ThreadedStartChamferDiameter	Returns the threaded start chamfer offset - this is applicable for threaded hole type
ThreadedStartChamferEnabled	Returns or sets the threaded start chamfer enabled - this is applicable for threaded hole type
ThreadedTipAngle	Returns the tip angle - this is applicable for threaded hole
Tolerance	Returns or sets the distance tolerance
Type	Returns or sets the type
UntilSelectedTarget	Returns the until selected target - this is applicable for general hole, threaded hole and drill size hole type

Methods¶

Method	Description
Commit	Commits any edits that have been applied to the builder.
CommitFeature	Commits the feature parameters and creates the feature
Destroy	Deletes the builder, and cleans up any objects created by the builder.
GetCommittedObjects	For builders that create more than one object, this method returns the objects that are created by commit.
GetFeature	Returns the feature currently being edited by this builder.
GetObject	Returns the object currently being edited by this builder.
HideInternalParentFeatureAfterEdit	Re-suppress an internal parent feature (a slave feature) after it has been edited.
SetParentFeatureInternal	Set the parent features which would be internal or slaves to the feature being created or commited
ShowInternalParentFeatureForEdit	Unsuppress an internal parent feature (a slave feature) so it can be edited.
ShowResults	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
UnsetParentFeatureInternal	Set the internal parent feature of the feature being edited to external
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations¶

HolePackageBuilderHoleDepthLimitOptions Enumeration	Represents hole depth limit options.
HolePackageBuilderHoleDepthOptions Enumeration	Represents hole depth specification options.
HolePackageBuilderHoleForms Enumeration	Represents hole form options.
HolePackageBuilderThreadLengthOptions Enumeration	Represents thread length options.
HolePackageBuilderThreadRotationOptions Enumeration	Represents thread rotation options.
HolePackageBuilderTypes Enumeration	Represents hole types.

Property Detail¶

BooleanOperation¶

HolePackageBuilder.BooleanOperation¶

Returns the boolean operation

-------------------------------------

Getter Method

Signature BooleanOperation

Returns:
Return type:	`NXOpen.GeometricUtilities.BooleanOperation`

New in version NX5.0.2.

License requirements: None.

DepthOption¶

HolePackageBuilder.DepthOption¶

Returns or sets the hole depth option

-------------------------------------

Getter Method

Signature DepthOption

Returns:
Return type:	`NXOpen.Features.HolePackageBuilderHoleDepthOptions`

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DepthOption

Parameters:	depthOption (`NXOpen.Features.HolePackageBuilderHoleDepthOptions`) –

New in version NX11.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

DrillSize¶

HolePackageBuilder.DrillSize¶

Returns or sets the drill size - this is applicable for drill size hole

-------------------------------------

Getter Method

Signature DrillSize

Returns:
Return type:	str

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DrillSize

Parameters:	drillSize (str) –

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

DrillSizeEndChamferAngle¶

HolePackageBuilder.DrillSizeEndChamferAngle¶

Returns the drill size end chamfer angle - this is applicable for drill size hole type

-------------------------------------

Getter Method

Signature DrillSizeEndChamferAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

DrillSizeEndChamferEnabled¶

HolePackageBuilder.DrillSizeEndChamferEnabled¶

Returns or sets the drill size end chamfer enabled - this is applicable for drill size hole type

-------------------------------------

Getter Method

Signature DrillSizeEndChamferEnabled

Returns:
Return type:	bool

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DrillSizeEndChamferEnabled

Parameters:	drillSizeEndChamferEnabled (bool) –

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

DrillSizeEndChamferOffset¶

HolePackageBuilder.DrillSizeEndChamferOffset¶

Returns the drill size end chamfer offset - this is applicable for drill size hole type

-------------------------------------

Getter Method

Signature DrillSizeEndChamferOffset

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

DrillSizeFitOption¶

HolePackageBuilder.DrillSizeFitOption¶

Returns or sets the drill size screw fit Option - this is applicable for drill size hole

-------------------------------------

Getter Method

Signature DrillSizeFitOption

Returns:
Return type:	str

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DrillSizeFitOption

Parameters:	drillSizeFitOption (str) –

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

DrillSizeHoleDepth¶

HolePackageBuilder.DrillSizeHoleDepth¶

Returns the hole depth - this is applicable for drill size hole

-------------------------------------

Getter Method

Signature DrillSizeHoleDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

DrillSizeHoleDiameter¶

HolePackageBuilder.DrillSizeHoleDiameter¶

Returns the hole diameter - this is applicable for drill size hole

-------------------------------------

Getter Method

Signature DrillSizeHoleDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

DrillSizeStandard¶

HolePackageBuilder.DrillSizeStandard¶

Returns or sets the drill size standard - this is applicable for drill size hole type

-------------------------------------

Getter Method

Signature DrillSizeStandard

Returns:
Return type:	str

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DrillSizeStandard

Parameters:	drillSizeStandard (str) –

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

DrillSizeStartChamferAngle¶

HolePackageBuilder.DrillSizeStartChamferAngle¶

Returns the drill size start chamfer angle - this is applicable for drill size hole type

-------------------------------------

Getter Method

Signature DrillSizeStartChamferAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

DrillSizeStartChamferEnabled¶

HolePackageBuilder.DrillSizeStartChamferEnabled¶

Returns or sets the drill size start chamfer enabled - this is applicable for drill size hole type

-------------------------------------

Getter Method

Signature DrillSizeStartChamferEnabled

Returns:
Return type:	bool

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DrillSizeStartChamferEnabled

Parameters:	drillSizeStartChamferEnabled (bool) –

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

DrillSizeStartChamferOffset¶

HolePackageBuilder.DrillSizeStartChamferOffset¶

Returns the drill size start chamfer offset - this is applicable for drill size hole type

-------------------------------------

Getter Method

Signature DrillSizeStartChamferOffset

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

DrillSizeTipAngle¶

HolePackageBuilder.DrillSizeTipAngle¶

Returns the tip angle - this is applicable for drill size hole

-------------------------------------

Getter Method

Signature DrillSizeTipAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

EndHoleData¶

HolePackageBuilder.EndHoleData¶

Returns the target body

-------------------------------------

Getter Method

Signature EndHoleData

Returns:
Return type:	`NXOpen.GeometricUtilities.EndHoleData`

New in version NX5.0.2.

License requirements: None.

GeneralCounterboreDepth¶

HolePackageBuilder.GeneralCounterboreDepth¶

Returns the counter bore depth - this is applicable for general hole

-------------------------------------

Getter Method

Signature GeneralCounterboreDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

GeneralCounterboreDiameter¶

HolePackageBuilder.GeneralCounterboreDiameter¶

Returns the counter bore diameter - this is applicable for general hole

-------------------------------------

Getter Method

Signature GeneralCounterboreDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

GeneralCounterboreHoleDepth¶

HolePackageBuilder.GeneralCounterboreHoleDepth¶

Returns the counterbore hole depth - this is applicable for general hole counterbore form

-------------------------------------

Getter Method

Signature GeneralCounterboreHoleDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

GeneralCounterboreHoleDiameter¶

HolePackageBuilder.GeneralCounterboreHoleDiameter¶

Returns the counterbore hole diameter - this is applicable for general hole counterbore form

-------------------------------------

Getter Method

Signature GeneralCounterboreHoleDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

GeneralCountersinkAngle¶

HolePackageBuilder.GeneralCountersinkAngle¶

Returns the counter sink angle - this is applicable for general hole

-------------------------------------

Getter Method

Signature GeneralCountersinkAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

GeneralCountersinkDiameter¶

HolePackageBuilder.GeneralCountersinkDiameter¶

Returns the counter sink diameter - this is applicable for general hole

-------------------------------------

Getter Method

Signature GeneralCountersinkDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

GeneralCountersinkHoleDepth¶

HolePackageBuilder.GeneralCountersinkHoleDepth¶

Returns the countersink hole depth - this is applicable for general hole countersink form

-------------------------------------

Getter Method

Signature GeneralCountersinkHoleDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

GeneralCountersinkHoleDiameter¶

HolePackageBuilder.GeneralCountersinkHoleDiameter¶

Returns the countersink hole diameter - this is applicable for general hole countersink form

-------------------------------------

Getter Method

Signature GeneralCountersinkHoleDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

GeneralHoleForm¶

HolePackageBuilder.GeneralHoleForm¶

Returns or sets the hole form - this is applicable for general hole

-------------------------------------

Getter Method

Signature GeneralHoleForm

Returns:
Return type:	`NXOpen.Features.HolePackageBuilderHoleForms`

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature GeneralHoleForm

Parameters:	holeForm (`NXOpen.Features.HolePackageBuilderHoleForms`) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

GeneralSimpleHoleDepth¶

HolePackageBuilder.GeneralSimpleHoleDepth¶

Returns the simple hole depth - this is applicable for general hole simple form

-------------------------------------

Getter Method

Signature GeneralSimpleHoleDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

GeneralSimpleHoleDiameter¶

HolePackageBuilder.GeneralSimpleHoleDiameter¶

Returns the simple hole diameter - this is applicable for general hole simple form

-------------------------------------

Getter Method

Signature GeneralSimpleHoleDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

GeneralTaperAngle¶

HolePackageBuilder.GeneralTaperAngle¶

Returns the taper angle - this is applicable for general hole

-------------------------------------

Getter Method

Signature GeneralTaperAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

GeneralTaperedHoleDepth¶

HolePackageBuilder.GeneralTaperedHoleDepth¶

Returns the tapered hole depth - this is applicable for general hole tapered form

-------------------------------------

Getter Method

Signature GeneralTaperedHoleDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

GeneralTaperedHoleDiameter¶

HolePackageBuilder.GeneralTaperedHoleDiameter¶

Returns the tapered hole diameter - this is applicable for general hole tapered form

-------------------------------------

Getter Method

Signature GeneralTaperedHoleDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

GeneralTipAngle¶

HolePackageBuilder.GeneralTipAngle¶

Returns the tip angle - this is applicable for general hole

-------------------------------------

Getter Method

Signature GeneralTipAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

HoleDepthLimitOption¶

HolePackageBuilder.HoleDepthLimitOption¶

Returns or sets the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type

-------------------------------------

Getter Method

Signature HoleDepthLimitOption

Returns:
Return type:	`NXOpen.Features.HolePackageBuilderHoleDepthLimitOptions`

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature HoleDepthLimitOption

Parameters:	holeDepthLimitOption (`NXOpen.Features.HolePackageBuilderHoleDepthLimitOptions`) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

HolePosition¶

HolePackageBuilder.HolePosition¶

Returns the hole position

-------------------------------------

Getter Method

Signature HolePosition

Returns:
Return type:	`NXOpen.Section`

New in version NX5.0.2.

License requirements: None.

MiddleHoleData¶

HolePackageBuilder.MiddleHoleData¶

Returns the target body

-------------------------------------

Getter Method

Signature MiddleHoleData

Returns:
Return type:	`NXOpen.GeometricUtilities.MiddleHoleData`

New in version NX5.0.2.

License requirements: None.

NeckChamferEnabled¶

HolePackageBuilder.NeckChamferEnabled¶

Returns or sets the neck chamfer enabled - this is applicable for screw clearence hole type with counterbore hole form

-------------------------------------

Getter Method

Signature NeckChamferEnabled

Returns:
Return type:	bool

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature NeckChamferEnabled

Parameters:	neckChamferEnabled (bool) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ProjectionDirection¶

HolePackageBuilder.ProjectionDirection¶

Returns the hole direction options

-------------------------------------

Getter Method

Signature ProjectionDirection

Returns:
Return type:	`NXOpen.GeometricUtilities.ProjectionOptions`

New in version NX5.0.2.

License requirements: None.

RadialEngageOption¶

HolePackageBuilder.RadialEngageOption¶

Returns or sets the radial engage option - this is applicable for screw clearence hole

-------------------------------------

Getter Method

Signature RadialEngageOption

Returns:
Return type:	str

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature RadialEngageOption

Parameters:	radialEngageOption (str) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ReliefChamferEnabled¶

HolePackageBuilder.ReliefChamferEnabled¶

Returns or sets the threaded relief chamfer enabled - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ReliefChamferEnabled

Returns:
Return type:	bool

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ReliefChamferEnabled

Parameters:	reliefChamferEnabled (bool) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ScrewClearanceCounterboreDepth¶

HolePackageBuilder.ScrewClearanceCounterboreDepth¶

Returns the counter bore depth - this is applicable for screw clearence hole

-------------------------------------

Getter Method

Signature ScrewClearanceCounterboreDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceCounterboreDiameter¶

HolePackageBuilder.ScrewClearanceCounterboreDiameter¶

Returns the counter bore diameter - this is applicable for screw clearence hole

-------------------------------------

Getter Method

Signature ScrewClearanceCounterboreDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceCountersinkAngle¶

HolePackageBuilder.ScrewClearanceCountersinkAngle¶

Returns the counter sink angle - this is applicable for screw clearence hole

-------------------------------------

Getter Method

Signature ScrewClearanceCountersinkAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceCountersinkDiameter¶

HolePackageBuilder.ScrewClearanceCountersinkDiameter¶

Returns the counter sink diameter - this is applicable for screw clearence hole

-------------------------------------

Getter Method

Signature ScrewClearanceCountersinkDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceEndChamferAngle¶

HolePackageBuilder.ScrewClearanceEndChamferAngle¶

Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type

-------------------------------------

Getter Method

Signature ScrewClearanceEndChamferAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceEndChamferEnabled¶

HolePackageBuilder.ScrewClearanceEndChamferEnabled¶

Returns or sets the end chamfer enabled - this is applicable for screw clearance hole type

-------------------------------------

Getter Method

Signature ScrewClearanceEndChamferEnabled

Returns:
Return type:	bool

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ScrewClearanceEndChamferEnabled

Parameters:	screwClearanceEndChamferEnabled (bool) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ScrewClearanceEndChamferOffset¶

HolePackageBuilder.ScrewClearanceEndChamferOffset¶

Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type

-------------------------------------

Getter Method

Signature ScrewClearanceEndChamferOffset

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceHoleDepth¶

HolePackageBuilder.ScrewClearanceHoleDepth¶

Returns the hole depth - this is applicable for screw clearance hole

-------------------------------------

Getter Method

Signature ScrewClearanceHoleDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

ScrewClearanceHoleDiameter¶

HolePackageBuilder.ScrewClearanceHoleDiameter¶

Returns the hole diameter - this is applicable for screw clearence hole

-------------------------------------

Getter Method

Signature ScrewClearanceHoleDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceHoleForm¶

HolePackageBuilder.ScrewClearanceHoleForm¶

Returns or sets the hole form - this is applicable for screw clearance hole

-------------------------------------

Getter Method

Signature ScrewClearanceHoleForm

Returns:
Return type:	`NXOpen.Features.HolePackageBuilderHoleForms`

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ScrewClearanceHoleForm

Parameters:	holeForm (`NXOpen.Features.HolePackageBuilderHoleForms`) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ScrewClearanceNeckChamferAngle¶

HolePackageBuilder.ScrewClearanceNeckChamferAngle¶

Returns the neck chamfer angle - this is applicable for screw clearence hole type with counterbore hole form

-------------------------------------

Getter Method

Signature ScrewClearanceNeckChamferAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceNeckChamferOffset¶

HolePackageBuilder.ScrewClearanceNeckChamferOffset¶

Returns the neck chamfer offset - this is applicable for screw clearence hole type with counterbore hole form

-------------------------------------

Getter Method

Signature ScrewClearanceNeckChamferOffset

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceReliefDepth¶

HolePackageBuilder.ScrewClearanceReliefDepth¶

Returns the relief depth - this is applicable for screw clearence hole type

-------------------------------------

Getter Method

Signature ScrewClearanceReliefDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceReliefEnabled¶

HolePackageBuilder.ScrewClearanceReliefEnabled¶

Returns or sets the relief enabled - this is applicable for screw clearence hole type with countersunk hole form and threaded hole type

-------------------------------------

Getter Method

Signature ScrewClearanceReliefEnabled

Returns:
Return type:	bool

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ScrewClearanceReliefEnabled

Parameters:	screwClearanceReliefEnabled (bool) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ScrewClearanceStartChamferAngle¶

HolePackageBuilder.ScrewClearanceStartChamferAngle¶

Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type

-------------------------------------

Getter Method

Signature ScrewClearanceStartChamferAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceStartChamferEnabled¶

HolePackageBuilder.ScrewClearanceStartChamferEnabled¶

Returns or sets the screw clearance start chamfer enabled - this is applicable for screw clearance hole type

-------------------------------------

Getter Method

Signature ScrewClearanceStartChamferEnabled

Returns:
Return type:	bool

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ScrewClearanceStartChamferEnabled

Parameters:	screwClearanceStartChamferEnabled (bool) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ScrewClearanceStartChamferOffset¶

HolePackageBuilder.ScrewClearanceStartChamferOffset¶

Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type

-------------------------------------

Getter Method

Signature ScrewClearanceStartChamferOffset

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ScrewClearanceTipAngle¶

HolePackageBuilder.ScrewClearanceTipAngle¶

Returns the tip angle - this is applicable for screw clearance hole

-------------------------------------

Getter Method

Signature ScrewClearanceTipAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: None.

ScrewFitOption¶

HolePackageBuilder.ScrewFitOption¶

Returns or sets the screw fit Option - this is applicable for screw clearence hole

-------------------------------------

Getter Method

Signature ScrewFitOption

Returns:
Return type:	str

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ScrewFitOption

Parameters:	screwFitOption (str) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ScrewSize¶

HolePackageBuilder.ScrewSize¶

Returns or sets the screw size - this is applicable for screw clearence hole

-------------------------------------

Getter Method

Signature ScrewSize

Returns:
Return type:	str

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ScrewSize

Parameters:	screwSize (str) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ScrewStandard¶

HolePackageBuilder.ScrewStandard¶

Returns or sets the screw standard - this is applicable for screw clearence hole type

-------------------------------------

Getter Method

Signature ScrewStandard

Returns:
Return type:	str

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ScrewStandard

Parameters:	screwStandard (str) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ScrewType¶

HolePackageBuilder.ScrewType¶

Returns or sets the screw type - this is applicable for screw clearence hole

-------------------------------------

Getter Method

Signature ScrewType

Returns:
Return type:	str

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ScrewType

Parameters:	screwType (str) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

StartExtensionEnabled¶

HolePackageBuilder.StartExtensionEnabled¶

Returns or sets the extend start enabled - this is applicable for start extension to all hole types

-------------------------------------

Getter Method

Signature StartExtensionEnabled

Returns:
Return type:	bool

New in version NX7.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature StartExtensionEnabled

Parameters:	startExtensionEnabled (bool) –

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

StartHoleData¶

HolePackageBuilder.StartHoleData¶

Returns the start target body

-------------------------------------

Getter Method

Signature StartHoleData

Returns:
Return type:	`NXOpen.GeometricUtilities.StartHoleData`

New in version NX5.0.2.

License requirements: None.

TapDrillDiameter¶

HolePackageBuilder.TapDrillDiameter¶

Returns the tap drill diameter - this is applicable for threaded hole

-------------------------------------

Getter Method

Signature TapDrillDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadDepth¶

HolePackageBuilder.ThreadDepth¶

Returns the thread depth - this is applicable for threaded hole

-------------------------------------

Getter Method

Signature ThreadDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadLengthOption¶

HolePackageBuilder.ThreadLengthOption¶

Returns or sets the thread length option - this is applicable for threaded hole

-------------------------------------

Getter Method

Signature ThreadLengthOption

Returns:
Return type:	`NXOpen.Features.HolePackageBuilderThreadLengthOptions`

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ThreadLengthOption

Parameters:	threadLengthOption (`NXOpen.Features.HolePackageBuilderThreadLengthOptions`) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ThreadRotation¶

HolePackageBuilder.ThreadRotation¶

Returns or sets the thread rotation - this is applicable for threaded hole

-------------------------------------

Getter Method

Signature ThreadRotation

Returns:
Return type:	`NXOpen.Features.HolePackageBuilderThreadRotationOptions`

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ThreadRotation

Parameters:	threadRotation (`NXOpen.Features.HolePackageBuilderThreadRotationOptions`) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ThreadSize¶

HolePackageBuilder.ThreadSize¶

Returns or sets the thread size - this is applicable for threaded hole

-------------------------------------

Getter Method

Signature ThreadSize

Returns:
Return type:	str

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ThreadSize

Parameters:	threadSize (str) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ThreadStandard¶

HolePackageBuilder.ThreadStandard¶

Returns or sets the thread standard - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadStandard

Returns:
Return type:	str

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ThreadStandard

Parameters:	threadStandard (str) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ThreadedEndChamferAngle¶

HolePackageBuilder.ThreadedEndChamferAngle¶

Returns the threaded end chamfer angle - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedEndChamferAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadedEndChamferDiameter¶

HolePackageBuilder.ThreadedEndChamferDiameter¶

Returns the threaded end chamfer offset - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedEndChamferDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadedEndChamferEnabled¶

HolePackageBuilder.ThreadedEndChamferEnabled¶

Returns or sets the threaded end chamfer enabled - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedEndChamferEnabled

Returns:
Return type:	bool

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ThreadedEndChamferEnabled

Parameters:	threadedEndChamferEnabled (bool) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ThreadedHoleDepth¶

HolePackageBuilder.ThreadedHoleDepth¶

Returns the hole depth - this is applicable for threaded hole

-------------------------------------

Getter Method

Signature ThreadedHoleDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadedReliefAngle¶

HolePackageBuilder.ThreadedReliefAngle¶

Returns the relief angle - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedReliefAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadedReliefChamferAngle¶

HolePackageBuilder.ThreadedReliefChamferAngle¶

Returns the threaded relief chamfer angle - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedReliefChamferAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadedReliefChamferOffset¶

HolePackageBuilder.ThreadedReliefChamferOffset¶

Returns the threaded relief chamfer offset - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedReliefChamferOffset

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadedReliefDepth¶

HolePackageBuilder.ThreadedReliefDepth¶

Returns the threaded relief depth - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedReliefDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadedReliefDiameter¶

HolePackageBuilder.ThreadedReliefDiameter¶

Returns the relief diameter - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedReliefDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadedReliefEnabled¶

HolePackageBuilder.ThreadedReliefEnabled¶

Returns or sets the threaded relief enabled - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedReliefEnabled

Returns:
Return type:	bool

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ThreadedReliefEnabled

Parameters:	threadedReliefEnabled (bool) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ThreadedStartChamferAngle¶

HolePackageBuilder.ThreadedStartChamferAngle¶

Returns the threaded start chamfer angle - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedStartChamferAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadedStartChamferDiameter¶

HolePackageBuilder.ThreadedStartChamferDiameter¶

Returns the threaded start chamfer offset - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedStartChamferDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

ThreadedStartChamferEnabled¶

HolePackageBuilder.ThreadedStartChamferEnabled¶

Returns or sets the threaded start chamfer enabled - this is applicable for threaded hole type

-------------------------------------

Getter Method

Signature ThreadedStartChamferEnabled

Returns:
Return type:	bool

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature ThreadedStartChamferEnabled

Parameters:	threadedStartChamferEnabled (bool) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

ThreadedTipAngle¶

HolePackageBuilder.ThreadedTipAngle¶

Returns the tip angle - this is applicable for threaded hole

-------------------------------------

Getter Method

Signature ThreadedTipAngle

Returns:
Return type:	`NXOpen.Expression`

New in version NX5.0.2.

License requirements: None.

Tolerance¶

HolePackageBuilder.Tolerance¶

Returns or sets the distance tolerance

-------------------------------------

Getter Method

Signature Tolerance

Returns:
Return type:	float

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature Tolerance

Parameters:	tolerance (float) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

Type¶

HolePackageBuilder.Type¶

Returns or sets the type

-------------------------------------

Getter Method

Signature Type

Returns:
Return type:	`NXOpen.Features.HolePackageBuilderTypes`

New in version NX5.0.2.

License requirements: None.

-------------------------------------

Setter Method

Signature Type

Parameters:	type (`NXOpen.Features.HolePackageBuilderTypes`) –

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

UntilSelectedTarget¶

HolePackageBuilder.UntilSelectedTarget¶

Returns the until selected target - this is applicable for general hole, threaded hole and drill size hole type

-------------------------------------

Getter Method

Signature UntilSelectedTarget

Returns:	It can be face and datums.
Return type:	`NXOpen.SelectDisplayableObject`

New in version NX5.0.2.

License requirements: None.

Method Detail¶

Validate¶

HolePackageBuilder.Validate¶

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:	Was self validation successful
Return type:	bool

New in version NX3.0.1.

License requirements: None.