StudioXformBuilder Class¶

class NXOpen.Features.StudioXformBuilder¶

Bases: NXOpen.Features.FeatureBuilder

Represents a NXOpen.Features.StudioXform builder

To create a new instance of this class, use NXOpen.Features.FeatureCollection.CreateStudioXformBuilder()

Default values.

Property	Value
AdvancedMethod	AdvanceOff
CurveRange.AnchorPosition	Start
DegreesAndSegmentsOrPatches.Degree	3
DegreesAndSegmentsOrPatches.SegmentsOrPatches	1
DegreesAndSegmentsOrPatches.UDegree	5
DegreesAndSegmentsOrPatches.UPatches	1
DegreesAndSegmentsOrPatches.VDegree	5
DegreesAndSegmentsOrPatches.VPatches	1
FallOffScale	0
FeatureSaveMethod	Relative
InsertKnotDirection	UDirection
InsertKnotParameter	20
IsSingleSelection	1
KeepAllContinuity	0
LockRegionUEndFlexibility	0
LockRegionUStartFlexibility	0
LockRegionVEndFlexibility	0
LockRegionVStartFlexibility	0
PlanarizeDirection	U
PlanarizeMethod	AtPlaneLocation
PlanarizePlaneOption	YcZc
ProportionalAllU	0
ProportionalAllV	0
ProportionalFallOffScale	0
ProportionalMoveAfterU	0
ProportionalMoveAfterV	0
ProportionalMoveBeforeU	0
ProportionalMoveBeforeV	0
RotationDirection	Zc
ScalingDirection	Zc
SurfaceRange.AnchorPosition	Vertex1
TranslationDirection	Zc

New in version NX6.0.0.

Deprecated since version NX8.5.0: Use NXOpen.Features.StudioXformBuilderEx instead.

Properties¶

Property	Description
AdvancedMethod	Returns or sets the advanced method
CenterPoint	Returns or sets the scaling center type
ContinuityUMax	Returns the continuity at U maximum
ContinuityUMin	Returns the continuity at U minimum
ContinuityVMax	Returns the continuity at V maximum
ContinuityVMin	Returns the continuity at V minimum
ControlPoleManager	Returns the control pole manager
CurveRange	Returns the curve range
DegreesAndSegmentsOrPatches	Returns the degrees and segments or patches
FallOffScale	Returns or sets the fall off scale
FeatureSaveMethod	Returns or sets the feature save method
InsertKnotDirection	Returns or sets the insert knot direction
InsertKnotParameter	Returns or sets the parameter where to insert knots
IsSingleSelection	Returns or sets the single selection flag
KeepAllContinuity	Returns or sets a value indicating whether to keep all continuity
LockRegionUEndFlexibility	Returns or sets the lock region flexibility at U end
LockRegionUStartFlexibility	Returns or sets the lock region flexibility at U start
LockRegionVEndFlexibility	Returns or sets the lock region flexibility at V end
LockRegionVStartFlexibility	Returns or sets the lock region flexibility at V start
ParentFeatureInternal	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal
PatchSolutionFlag	Returns or sets the patch solution flag
PatchSurfaceFilename	Returns or sets the patch surface filename
PivotPoint	Returns or sets the rotating center
PlanarizeArbitraryPlane	Returns or sets the planarize arbitrary plane
PlanarizeDirection	Returns or sets the planarize direction
PlanarizeMethod	Returns or sets the planarize method
PlanarizePlaneOption	Returns or sets the planarize plane option
ProportionalAllU	Returns or sets a value indicating whether to use all poles in U direction during the proportional movement
ProportionalAllV	Returns or sets a value indicating whether to use all poles in V direction during the proportional movement
ProportionalFallOffScale	Returns or sets the proportional fall off scale
ProportionalMoveAfterU	Returns or sets a value indicating the pole number after u to participate in the proportional movement
ProportionalMoveAfterV	Returns or sets a value indicating the pole number after v to participate in the proportional movement
ProportionalMoveBeforeU	Returns or sets a value indicating the pole number before u to participate in the proportional movement
ProportionalMoveBeforeV	Returns or sets a value indicating the pole number before v to participate in the proportional movement
RotatingPivot	Returns or sets the rotating center type
RotationArbitraryPlane	Returns or sets the rotation arbitrary plane.
RotationArbitraryVector	Returns or sets the rotation arbitrary vector.
RotationDirection	Returns or sets the rotation direction
ScalingArbitraryPlane	Returns or sets the scaling arbitrary plane.
ScalingArbitraryVector	Returns or sets the scaling arbitrary vector.
ScalingCenter	Returns or sets the scaling center
ScalingDirection	Returns or sets the scaling direction
SurfaceRange	Returns the surface range
SurroundingPatchSurfaceFilename	Returns or sets the surrounding patch surface filename
Tag	Returns the Tag for this object.
TranslationArbitraryPlane	Returns or sets the translation arbitrary plane.
TranslationArbitraryVector	Returns or sets the translation arbitrary vector.
TranslationDirection	Returns or sets the translation direction
Type	Returns or sets the type
XformObjects	Returns the object to be transformed.

Methods¶

Method	Description
ChangeDegree	Changes degree of the selected xform object
ChangeFlexibility	Changes flexibility of the selected xform object
Commit	Commits any edits that have been applied to the builder.
CommitFeature	Commits the feature parameters and creates the feature
ConvertParameters	Converts parameters of the feature that owns selected xform object.
Destroy	Deletes the builder, and cleans up any objects created by the builder.
FallOffReset	Reset the fall off scale
GetCommittedObjects	For builders that create more than one object, this method returns the objects that are created by commit.
GetFeature	Returns the feature currently being edited by this builder.
GetObject	Returns the object currently being edited by this builder.
HideInternalParentFeatureAfterEdit	Re-suppress an internal parent feature (a slave feature) after it has been edited.
InsertKnot	Inserts knot in the selected xform object
InsertKnots	Insert knots
ProportionalReset	Reset the proportional scale
SetParentFeatureInternal	Set the parent features which would be internal or slaves to the feature being created or commited
ShapeReset	Reset the shape of a edited face or curve
ShowInternalParentFeatureForEdit	Unsuppress an internal parent feature (a slave feature) so it can be edited.
ShowResults	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
UnsetParentFeatureInternal	Set the internal parent feature of the feature being edited to external
UpdateLockRegionGeometry	Update lock region geometry with current geometry
UpdateXformObject	Updates the selected xform object
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations¶

StudioXformBuilderAdvancedMethodType Enumeration	Represents the advanced method type
StudioXformBuilderFeatureType Enumeration	Represents the feature type
StudioXformBuilderInsertKnotDirectionType Enumeration	Represents the insert knot direction type
StudioXformBuilderPlanarizeDirectionType Enumeration	Represents the planarize direction type
StudioXformBuilderPlanarizeMethodType Enumeration	Represents the planarize method type
StudioXformBuilderPlanarizePlaneOptionType Enumeration	Represents the plane option type
StudioXformBuilderRotatingPivotType Enumeration	Represents the rotating pivot type
StudioXformBuilderRotationDirectionType Enumeration	Represents the rotation direction type
StudioXformBuilderScalingCenterType Enumeration	Represents the scaling center type
StudioXformBuilderScalingDirectionType Enumeration	Represents the scaling direction type
StudioXformBuilderTranslationDirectionType Enumeration	Represents the translation direction type
StudioXformBuilderTypes Enumeration	Represents the Xform type

Property Detail¶

AdvancedMethod¶

StudioXformBuilder.AdvancedMethod¶

Returns or sets the advanced method

-------------------------------------

Getter Method

Signature AdvancedMethod

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderAdvancedMethodType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AdvancedMethod

Parameters:	advancedMethod (`NXOpen.Features.StudioXformBuilderAdvancedMethodType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

CenterPoint¶

StudioXformBuilder.CenterPoint¶

Returns or sets the scaling center type

-------------------------------------

Getter Method

Signature CenterPoint

Returns:
Return type:	`NXOpen.Point`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature CenterPoint

Parameters:	centerPoint (`NXOpen.Point`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ContinuityUMax¶

StudioXformBuilder.ContinuityUMax¶

Returns the continuity at U maximum

-------------------------------------

Getter Method

Signature ContinuityUMax

Returns:
Return type:	`NXOpen.GeometricUtilities.Continuity`

New in version NX6.0.0.

License requirements: None.

ContinuityUMin¶

StudioXformBuilder.ContinuityUMin¶

Returns the continuity at U minimum

-------------------------------------

Getter Method

Signature ContinuityUMin

Returns:
Return type:	`NXOpen.GeometricUtilities.Continuity`

New in version NX6.0.0.

License requirements: None.

ContinuityVMax¶

StudioXformBuilder.ContinuityVMax¶

Returns the continuity at V maximum

-------------------------------------

Getter Method

Signature ContinuityVMax

Returns:
Return type:	`NXOpen.GeometricUtilities.Continuity`

New in version NX6.0.0.

License requirements: None.

ContinuityVMin¶

StudioXformBuilder.ContinuityVMin¶

Returns the continuity at V minimum

-------------------------------------

Getter Method

Signature ContinuityVMin

Returns:
Return type:	`NXOpen.GeometricUtilities.Continuity`

New in version NX6.0.0.

License requirements: None.

ControlPoleManager¶

StudioXformBuilder.ControlPoleManager¶

Returns the control pole manager

-------------------------------------

Getter Method

Signature ControlPoleManager

Returns:
Return type:	`NXOpen.GeometricUtilities.ControlPoleManagerData`

New in version NX6.0.0.

License requirements: None.

CurveRange¶

StudioXformBuilder.CurveRange¶

Returns the curve range

-------------------------------------

Getter Method

Signature CurveRange

Returns:
Return type:	`NXOpen.GeometricUtilities.CurveRangeBuilder`

New in version NX6.0.0.

License requirements: None.

DegreesAndSegmentsOrPatches¶

StudioXformBuilder.DegreesAndSegmentsOrPatches¶

Returns the degrees and segments or patches

-------------------------------------

Getter Method

Signature DegreesAndSegmentsOrPatches

Returns:
Return type:	`NXOpen.GeometricUtilities.DegreesAndSegmentsOrPatchesBuilder`

New in version NX6.0.0.

License requirements: None.

FallOffScale¶

StudioXformBuilder.FallOffScale¶

Returns or sets the fall off scale

-------------------------------------

Getter Method

Signature FallOffScale

Returns:
Return type:	float

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature FallOffScale

Parameters:	fallOffScale (float) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

FeatureSaveMethod¶

StudioXformBuilder.FeatureSaveMethod¶

Returns or sets the feature save method

-------------------------------------

Getter Method

Signature FeatureSaveMethod

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderFeatureType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature FeatureSaveMethod

Parameters:	featureSaveMethod (`NXOpen.Features.StudioXformBuilderFeatureType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

InsertKnotDirection¶

StudioXformBuilder.InsertKnotDirection¶

Returns or sets the insert knot direction

-------------------------------------

Getter Method

Signature InsertKnotDirection

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderInsertKnotDirectionType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature InsertKnotDirection

Parameters:	insertKnotDirection (`NXOpen.Features.StudioXformBuilderInsertKnotDirectionType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

InsertKnotParameter¶

StudioXformBuilder.InsertKnotParameter¶

Returns or sets the parameter where to insert knots

-------------------------------------

Getter Method

Signature InsertKnotParameter

Returns:
Return type:	int

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature InsertKnotParameter

Parameters:	insertKnotSlider (int) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

IsSingleSelection¶

StudioXformBuilder.IsSingleSelection¶

Returns or sets the single selection flag

-------------------------------------

Getter Method

Signature IsSingleSelection

Returns:
Return type:	bool

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature IsSingleSelection

Parameters:	singleSelectionFlag (bool) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

KeepAllContinuity¶

StudioXformBuilder.KeepAllContinuity¶

Returns or sets a value indicating whether to keep all continuity

-------------------------------------

Getter Method

Signature KeepAllContinuity

Returns:
Return type:	bool

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature KeepAllContinuity

Parameters:	keepAllContinuity (bool) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

LockRegionUEndFlexibility¶

StudioXformBuilder.LockRegionUEndFlexibility¶

Returns or sets the lock region flexibility at U end

-------------------------------------

Getter Method

Signature LockRegionUEndFlexibility

Returns:
Return type:	int

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature LockRegionUEndFlexibility

Parameters:	lockRegionUEndFlexibility (int) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

LockRegionUStartFlexibility¶

StudioXformBuilder.LockRegionUStartFlexibility¶

Returns or sets the lock region flexibility at U start

-------------------------------------

Getter Method

Signature LockRegionUStartFlexibility

Returns:
Return type:	int

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature LockRegionUStartFlexibility

Parameters:	lockRegionUStartFlexibility (int) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

LockRegionVEndFlexibility¶

StudioXformBuilder.LockRegionVEndFlexibility¶

Returns or sets the lock region flexibility at V end

-------------------------------------

Getter Method

Signature LockRegionVEndFlexibility

Returns:
Return type:	int

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature LockRegionVEndFlexibility

Parameters:	lockRegionVEndFlexibility (int) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

LockRegionVStartFlexibility¶

StudioXformBuilder.LockRegionVStartFlexibility¶

Returns or sets the lock region flexibility at V start

-------------------------------------

Getter Method

Signature LockRegionVStartFlexibility

Returns:
Return type:	int

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature LockRegionVStartFlexibility

Parameters:	lockRegionVStartFlexibility (int) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

PivotPoint¶

StudioXformBuilder.PivotPoint¶

Returns or sets the rotating center

-------------------------------------

Getter Method

Signature PivotPoint

Returns:
Return type:	`NXOpen.Point`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PivotPoint

Parameters:	pivotPoint (`NXOpen.Point`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

PlanarizeArbitraryPlane¶

StudioXformBuilder.PlanarizeArbitraryPlane¶

Returns or sets the planarize arbitrary plane

-------------------------------------

Getter Method

Signature PlanarizeArbitraryPlane

Returns:
Return type:	`NXOpen.Plane`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PlanarizeArbitraryPlane

Parameters:	planarizeArbitraryPlane (`NXOpen.Plane`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

PlanarizeDirection¶

StudioXformBuilder.PlanarizeDirection¶

Returns or sets the planarize direction

-------------------------------------

Getter Method

Signature PlanarizeDirection

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderPlanarizeDirectionType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PlanarizeDirection

Parameters:	planarizeDirection (`NXOpen.Features.StudioXformBuilderPlanarizeDirectionType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

PlanarizeMethod¶

StudioXformBuilder.PlanarizeMethod¶

Returns or sets the planarize method

-------------------------------------

Getter Method

Signature PlanarizeMethod

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderPlanarizeMethodType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PlanarizeMethod

Parameters:	planarizeMethod (`NXOpen.Features.StudioXformBuilderPlanarizeMethodType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

PlanarizePlaneOption¶

StudioXformBuilder.PlanarizePlaneOption¶

Returns or sets the planarize plane option

-------------------------------------

Getter Method

Signature PlanarizePlaneOption

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderPlanarizePlaneOptionType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PlanarizePlaneOption

Parameters:	planarizePlaneOption (`NXOpen.Features.StudioXformBuilderPlanarizePlaneOptionType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ProportionalAllU¶

StudioXformBuilder.ProportionalAllU¶

Returns or sets a value indicating whether to use all poles in U direction during the proportional movement

-------------------------------------

Getter Method

Signature ProportionalAllU

Returns:
Return type:	bool

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ProportionalAllU

Parameters:	proportionalAllU (bool) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ProportionalAllV¶

StudioXformBuilder.ProportionalAllV¶

Returns or sets a value indicating whether to use all poles in V direction during the proportional movement

-------------------------------------

Getter Method

Signature ProportionalAllV

Returns:
Return type:	bool

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ProportionalAllV

Parameters:	proportionalAllV (bool) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ProportionalFallOffScale¶

StudioXformBuilder.ProportionalFallOffScale¶

Returns or sets the proportional fall off scale

-------------------------------------

Getter Method

Signature ProportionalFallOffScale

Returns:
Return type:	float

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ProportionalFallOffScale

Parameters:	proportionalFallOffScale (float) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ProportionalMoveAfterU¶

StudioXformBuilder.ProportionalMoveAfterU¶

Returns or sets a value indicating the pole number after u to participate in the proportional movement

-------------------------------------

Getter Method

Signature ProportionalMoveAfterU

Returns:
Return type:	int

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ProportionalMoveAfterU

Parameters:	proportionalMoveAfterU (int) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ProportionalMoveAfterV¶

StudioXformBuilder.ProportionalMoveAfterV¶

Returns or sets a value indicating the pole number after v to participate in the proportional movement

-------------------------------------

Getter Method

Signature ProportionalMoveAfterV

Returns:
Return type:	int

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ProportionalMoveAfterV

Parameters:	proportionalMoveAfterV (int) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ProportionalMoveBeforeU¶

StudioXformBuilder.ProportionalMoveBeforeU¶

Returns or sets a value indicating the pole number before u to participate in the proportional movement

-------------------------------------

Getter Method

Signature ProportionalMoveBeforeU

Returns:
Return type:	int

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ProportionalMoveBeforeU

Parameters:	proportionalMoveBeforeU (int) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ProportionalMoveBeforeV¶

StudioXformBuilder.ProportionalMoveBeforeV¶

Returns or sets a value indicating the pole number before v to participate in the proportional movement

-------------------------------------

Getter Method

Signature ProportionalMoveBeforeV

Returns:
Return type:	int

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ProportionalMoveBeforeV

Parameters:	proportionalMoveBeforeV (int) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

RotatingPivot¶

StudioXformBuilder.RotatingPivot¶

Returns or sets the rotating center type

-------------------------------------

Getter Method

Signature RotatingPivot

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderRotatingPivotType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RotatingPivot

Parameters:	rotatePivot (`NXOpen.Features.StudioXformBuilderRotatingPivotType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

RotationArbitraryPlane¶

StudioXformBuilder.RotationArbitraryPlane¶

Returns or sets the rotation arbitrary plane.

Used only when the RotationPlane is ArbitraryPlane.

-------------------------------------

Getter Method

Signature RotationArbitraryPlane

Returns:
Return type:	`NXOpen.Plane`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RotationArbitraryPlane

Parameters:	rotateArbitraryPlane (`NXOpen.Plane`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

RotationArbitraryVector¶

StudioXformBuilder.RotationArbitraryVector¶

Returns or sets the rotation arbitrary vector.

Used only when the RotationDirection is ArbitraryDirection.

-------------------------------------

Getter Method

Signature RotationArbitraryVector

Returns:
Return type:	`NXOpen.Direction`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RotationArbitraryVector

Parameters:	rotateArbitraryVector (`NXOpen.Direction`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

RotationDirection¶

StudioXformBuilder.RotationDirection¶

Returns or sets the rotation direction

-------------------------------------

Getter Method

Signature RotationDirection

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderRotationDirectionType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RotationDirection

Parameters:	rotateDirection (`NXOpen.Features.StudioXformBuilderRotationDirectionType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ScalingArbitraryPlane¶

StudioXformBuilder.ScalingArbitraryPlane¶

Returns or sets the scaling arbitrary plane.

Used only when the ScalingDirection is ArbitraryPlane.

-------------------------------------

Getter Method

Signature ScalingArbitraryPlane

Returns:
Return type:	`NXOpen.Plane`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ScalingArbitraryPlane

Parameters:	scaleArbitraryPlane (`NXOpen.Plane`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ScalingArbitraryVector¶

StudioXformBuilder.ScalingArbitraryVector¶

Returns or sets the scaling arbitrary vector.

Used only when the ScalingDirection is ArbitraryDirection.

-------------------------------------

Getter Method

Signature ScalingArbitraryVector

Returns:
Return type:	`NXOpen.Direction`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ScalingArbitraryVector

Parameters:	scaleArbitraryVector (`NXOpen.Direction`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ScalingCenter¶

StudioXformBuilder.ScalingCenter¶

Returns or sets the scaling center

-------------------------------------

Getter Method

Signature ScalingCenter

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderScalingCenterType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ScalingCenter

Parameters:	scaleCenter (`NXOpen.Features.StudioXformBuilderScalingCenterType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ScalingDirection¶

StudioXformBuilder.ScalingDirection¶

Returns or sets the scaling direction

-------------------------------------

Getter Method

Signature ScalingDirection

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderScalingDirectionType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ScalingDirection

Parameters:	scaleDirection (`NXOpen.Features.StudioXformBuilderScalingDirectionType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

SurfaceRange¶

StudioXformBuilder.SurfaceRange¶

Returns the surface range

-------------------------------------

Getter Method

Signature SurfaceRange

Returns:
Return type:	`NXOpen.GeometricUtilities.SurfaceRangeBuilder`

New in version NX6.0.0.

License requirements: None.

TranslationArbitraryPlane¶

StudioXformBuilder.TranslationArbitraryPlane¶

Returns or sets the translation arbitrary plane.

Used only when the TranslationDirection is ArbitraryPlane.

-------------------------------------

Getter Method

Signature TranslationArbitraryPlane

Returns:
Return type:	`NXOpen.Plane`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TranslationArbitraryPlane

Parameters:	translateArbitraryPlane (`NXOpen.Plane`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

TranslationArbitraryVector¶

StudioXformBuilder.TranslationArbitraryVector¶

Returns or sets the translation arbitrary vector.

Used only when the TranslationDirection is ArbitraryDirection.

-------------------------------------

Getter Method

Signature TranslationArbitraryVector

Returns:
Return type:	`NXOpen.Direction`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TranslationArbitraryVector

Parameters:	translateArbitraryVector (`NXOpen.Direction`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

TranslationDirection¶

StudioXformBuilder.TranslationDirection¶

Returns or sets the translation direction

-------------------------------------

Getter Method

Signature TranslationDirection

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderTranslationDirectionType`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TranslationDirection

Parameters:	translateDirection (`NXOpen.Features.StudioXformBuilderTranslationDirectionType`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

Type¶

StudioXformBuilder.Type¶

Returns or sets the type

-------------------------------------

Getter Method

Signature Type

Returns:
Return type:	`NXOpen.Features.StudioXformBuilderTypes`

New in version NX6.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Type

Parameters:	type (`NXOpen.Features.StudioXformBuilderTypes`) –

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

XformObjects¶

StudioXformBuilder.XformObjects¶

Returns the object to be transformed.

Any face having b-surface type geometry or curve having b-curve geometry can be transformed.

-------------------------------------

Getter Method

Signature XformObjects

Returns:
Return type:	`NXOpen.SelectNXObjectList`

New in version NX6.0.0.

License requirements: None.

Method Detail¶

ChangeDegree¶

StudioXformBuilder.ChangeDegree¶

Changes degree of the selected xform object

Signature ChangeDegree(xformObject)

Parameters:	xformObject (`NXOpen.NXObject`) – the selected face or curve to change degree of

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ChangeFlexibility¶

StudioXformBuilder.ChangeFlexibility¶

Changes flexibility of the selected xform object

Signature ChangeFlexibility(xformObject)

Parameters:	xformObject (`NXOpen.NXObject`) – the selected face or curve to change flexibility of

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ConvertParameters¶

StudioXformBuilder.ConvertParameters¶

Converts parameters of the feature that owns selected xform object.

Converts through points studio spline feature to by poles feature, otherwise removes parameters of the feature.

Signature ConvertParameters(xformObject)

Parameters:	xformObject (`NXOpen.NXObject`) – the selected face or curve to convert pameters from

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

FallOffReset¶

StudioXformBuilder.FallOffReset¶

Reset the fall off scale

Signature FallOffReset()

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

InsertKnot¶

StudioXformBuilder.InsertKnot¶

Inserts knot in the selected xform object

Signature InsertKnot(xformObject)

Parameters:	xformObject (`NXOpen.NXObject`) – the selected face or curve to insert knot in

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

InsertKnots¶

StudioXformBuilder.InsertKnots¶

Insert knots

Signature InsertKnots()

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ProportionalReset¶

StudioXformBuilder.ProportionalReset¶

Reset the proportional scale

Signature ProportionalReset()

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

ShapeReset¶

StudioXformBuilder.ShapeReset¶

Reset the shape of a edited face or curve

Signature ShapeReset()

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

UpdateLockRegionGeometry¶

StudioXformBuilder.UpdateLockRegionGeometry¶

Update lock region geometry with current geometry

Signature UpdateLockRegionGeometry(xformObject)

Parameters:	xformObject (`NXOpen.NXObject`) – the selected face or curve to change flexibility of

New in version NX6.0.2.

License requirements: studio_free_form (“STUDIO FREE FORM”)

UpdateXformObject¶

StudioXformBuilder.UpdateXformObject¶

Updates the selected xform object

Signature UpdateXformObject(xformObject)

Parameters:	xformObject (`NXOpen.NXObject`) – the selected face or curve to be edited

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

Validate¶

StudioXformBuilder.Validate¶

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:	Was self validation successful
Return type:	bool

New in version NX3.0.1.

License requirements: None.