HeadImpactBPillarDetailBuilder Class¶

class NXOpen.Features.VehicleDesign.HeadImpactBPillarDetailBuilder¶

Bases: NXOpen.TaggedObject, NXOpen.GeometricUtilities.IComponentBuilder

Represents a NXOpen.Features.VehicleDesign.HeadImpactBPillarDetailBuilder.

This is an abstract class and cannot be instantiated.

New in version NX9.0.0.

Properties¶

Property	Description
BP1Left	Returns or sets the left BP1 alternative point.
BP1LeftFlag	Returns or sets the left BP1 alternative point flag.
BP1Right	Returns or sets the right BP1 alternative point.
BP1RightFlag	Returns or sets the right BP1 alternative point flag.
BP2Left	Returns or sets the left BP2 alternative point.
BP2LeftFlag	Returns or sets the left BP2 alternative point flag.
BP2Right	Returns or sets the right BP2 alternative point.
BP2RightFlag	Returns or sets the right BP2 alternative point flag.
BP3Left	Returns or sets the left BP3 alternative point.
BP3LeftFlag	Returns or sets the left BP3 alternative point flag.
BP3Right	Returns or sets the right BP3 alternative point.
BP3RightFlag	Returns or sets the right BP3 alternative point flag.
BP4Left	Returns or sets the left BP4 alternative point.
BP4LeftFlag	Returns or sets the left BP4 alternative point flag.
BP4Right	Returns or sets the right BP4 alternative point.
BP4RightFlag	Returns or sets the right BP4 alternative point flag.
CreateGeometry	Returns or sets the create construction geometry flag.
DaylightBottomLeft	Returns or sets the left Daylight Bottom additional geometry.
DaylightBottomLeftFlag	Returns or sets the left Daylight Bottom additional geometry flag.
DaylightBottomRight	Returns or sets the right Daylight Bottom additional geometry.
DaylightBottomRightFlag	Returns or sets the right Daylight Bottom additional geometry flag.
DoorTopLeft	Returns or sets the left Door Top additional geometry.
DoorTopLeftFlag	Returns or sets the left Door Top additional geometry flag.
DoorTopRight	Returns or sets the right Door Top additional geometry.
DoorTopRightFlag	Returns or sets the right Door Top additional geometry flag.
HorizontalLeftMax	Returns the left horizontal maximum required approach angle calculated value.
HorizontalLeftMin	Returns the left horizontal minimum required approach angle calculated value.
HorizontalRightMax	Returns the right horizontal maximum required approach angle calculated value.
HorizontalRightMin	Returns the right horizontal minimum required approach angle calculated value.
PT4Left	Returns or sets the left PT4 additional geometry.
PT4LeftFlag	Returns or sets the left PT4 additional geometry flag.
PT4Right	Returns or sets the right PT4 additional geometry.
PT4RightFlag	Returns or sets the right PT4 additional geometry flag.
ReqHorizontalLeftMax	Returns the left horizontal maximum required approach angle.
ReqHorizontalLeftMin	Returns the left horizontal minimum required approach angle.
ReqHorizontalRightMax	Returns the right horizontal maximum required approach angle.
ReqHorizontalRightMin	Returns the right horizontal minimum required approach angle.
ReqVerticalMax	Returns the vertical maximum required approach angle.
ReqVerticalMin	Returns the vertical minimum required approach angle.
Tag	Returns the Tag for this object.

Methods¶

Method	Description
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Property Detail¶

BP1Left¶

HeadImpactBPillarDetailBuilder.BP1Left¶

Returns or sets the left BP1 alternative point.

-------------------------------------

Getter Method

Signature BP1Left

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP1Left

Parameters:	bp1Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP1LeftFlag¶

HeadImpactBPillarDetailBuilder.BP1LeftFlag¶

Returns or sets the left BP1 alternative point flag.

-------------------------------------

Getter Method

Signature BP1LeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP1LeftFlag

Parameters:	bp1LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP1Right¶

HeadImpactBPillarDetailBuilder.BP1Right¶

Returns or sets the right BP1 alternative point.

-------------------------------------

Getter Method

Signature BP1Right

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP1Right

Parameters:	bp1Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP1RightFlag¶

HeadImpactBPillarDetailBuilder.BP1RightFlag¶

Returns or sets the right BP1 alternative point flag.

-------------------------------------

Getter Method

Signature BP1RightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP1RightFlag

Parameters:	bp1RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP2Left¶

HeadImpactBPillarDetailBuilder.BP2Left¶

Returns or sets the left BP2 alternative point.

-------------------------------------

Getter Method

Signature BP2Left

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP2Left

Parameters:	bp2Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP2LeftFlag¶

HeadImpactBPillarDetailBuilder.BP2LeftFlag¶

Returns or sets the left BP2 alternative point flag.

-------------------------------------

Getter Method

Signature BP2LeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP2LeftFlag

Parameters:	bp2LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP2Right¶

HeadImpactBPillarDetailBuilder.BP2Right¶

Returns or sets the right BP2 alternative point.

-------------------------------------

Getter Method

Signature BP2Right

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP2Right

Parameters:	bp2Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP2RightFlag¶

HeadImpactBPillarDetailBuilder.BP2RightFlag¶

Returns or sets the right BP2 alternative point flag.

-------------------------------------

Getter Method

Signature BP2RightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP2RightFlag

Parameters:	bp2RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP3Left¶

HeadImpactBPillarDetailBuilder.BP3Left¶

Returns or sets the left BP3 alternative point.

-------------------------------------

Getter Method

Signature BP3Left

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP3Left

Parameters:	bp3Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP3LeftFlag¶

HeadImpactBPillarDetailBuilder.BP3LeftFlag¶

Returns or sets the left BP3 alternative point flag.

-------------------------------------

Getter Method

Signature BP3LeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP3LeftFlag

Parameters:	bp3LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP3Right¶

HeadImpactBPillarDetailBuilder.BP3Right¶

Returns or sets the right BP3 alternative point.

-------------------------------------

Getter Method

Signature BP3Right

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP3Right

Parameters:	bp3Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP3RightFlag¶

HeadImpactBPillarDetailBuilder.BP3RightFlag¶

Returns or sets the right BP3 alternative point flag.

-------------------------------------

Getter Method

Signature BP3RightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP3RightFlag

Parameters:	bp3RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP4Left¶

HeadImpactBPillarDetailBuilder.BP4Left¶

Returns or sets the left BP4 alternative point.

-------------------------------------

Getter Method

Signature BP4Left

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP4Left

Parameters:	bp4Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP4LeftFlag¶

HeadImpactBPillarDetailBuilder.BP4LeftFlag¶

Returns or sets the left BP4 alternative point flag.

-------------------------------------

Getter Method

Signature BP4LeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP4LeftFlag

Parameters:	bp4LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP4Right¶

HeadImpactBPillarDetailBuilder.BP4Right¶

Returns or sets the right BP4 alternative point.

-------------------------------------

Getter Method

Signature BP4Right

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP4Right

Parameters:	bp4Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

BP4RightFlag¶

HeadImpactBPillarDetailBuilder.BP4RightFlag¶

Returns or sets the right BP4 alternative point flag.

-------------------------------------

Getter Method

Signature BP4RightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature BP4RightFlag

Parameters:	bp4RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

CreateGeometry¶

HeadImpactBPillarDetailBuilder.CreateGeometry¶

Returns or sets the create construction geometry flag.

-------------------------------------

Getter Method

Signature CreateGeometry

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature CreateGeometry

Parameters:	createGeometry (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DaylightBottomLeft¶

HeadImpactBPillarDetailBuilder.DaylightBottomLeft¶

Returns or sets the left Daylight Bottom additional geometry.

-------------------------------------

Getter Method

Signature DaylightBottomLeft

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DaylightBottomLeft

Parameters:	daylightBottomLeft (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DaylightBottomLeftFlag¶

HeadImpactBPillarDetailBuilder.DaylightBottomLeftFlag¶

Returns or sets the left Daylight Bottom additional geometry flag.

-------------------------------------

Getter Method

Signature DaylightBottomLeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DaylightBottomLeftFlag

Parameters:	daylightBottomLeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DaylightBottomRight¶

HeadImpactBPillarDetailBuilder.DaylightBottomRight¶

Returns or sets the right Daylight Bottom additional geometry.

-------------------------------------

Getter Method

Signature DaylightBottomRight

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DaylightBottomRight

Parameters:	daylightBottomRight (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DaylightBottomRightFlag¶

HeadImpactBPillarDetailBuilder.DaylightBottomRightFlag¶

Returns or sets the right Daylight Bottom additional geometry flag.

-------------------------------------

Getter Method

Signature DaylightBottomRightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DaylightBottomRightFlag

Parameters:	daylightBottomRightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DoorTopLeft¶

HeadImpactBPillarDetailBuilder.DoorTopLeft¶

Returns or sets the left Door Top additional geometry.

-------------------------------------

Getter Method

Signature DoorTopLeft

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DoorTopLeft

Parameters:	doorTopLeft (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DoorTopLeftFlag¶

HeadImpactBPillarDetailBuilder.DoorTopLeftFlag¶

Returns or sets the left Door Top additional geometry flag.

-------------------------------------

Getter Method

Signature DoorTopLeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DoorTopLeftFlag

Parameters:	doorTopLeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DoorTopRight¶

HeadImpactBPillarDetailBuilder.DoorTopRight¶

Returns or sets the right Door Top additional geometry.

-------------------------------------

Getter Method

Signature DoorTopRight

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DoorTopRight

Parameters:	doorTopRight (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DoorTopRightFlag¶

HeadImpactBPillarDetailBuilder.DoorTopRightFlag¶

Returns or sets the right Door Top additional geometry flag.

-------------------------------------

Getter Method

Signature DoorTopRightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DoorTopRightFlag

Parameters:	doorTopRightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

HorizontalLeftMax¶

HeadImpactBPillarDetailBuilder.HorizontalLeftMax¶

Returns the left horizontal maximum required approach angle calculated value.

-------------------------------------

Getter Method

Signature HorizontalLeftMax

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

HorizontalLeftMin¶

HeadImpactBPillarDetailBuilder.HorizontalLeftMin¶

Returns the left horizontal minimum required approach angle calculated value.

-------------------------------------

Getter Method

Signature HorizontalLeftMin

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

HorizontalRightMax¶

HeadImpactBPillarDetailBuilder.HorizontalRightMax¶

Returns the right horizontal maximum required approach angle calculated value.

-------------------------------------

Getter Method

Signature HorizontalRightMax

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

HorizontalRightMin¶

HeadImpactBPillarDetailBuilder.HorizontalRightMin¶

Returns the right horizontal minimum required approach angle calculated value.

-------------------------------------

Getter Method

Signature HorizontalRightMin

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

PT4Left¶

HeadImpactBPillarDetailBuilder.PT4Left¶

Returns or sets the left PT4 additional geometry.

-------------------------------------

Getter Method

Signature PT4Left

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT4Left

Parameters:	pt4Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT4LeftFlag¶

HeadImpactBPillarDetailBuilder.PT4LeftFlag¶

Returns or sets the left PT4 additional geometry flag.

-------------------------------------

Getter Method

Signature PT4LeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT4LeftFlag

Parameters:	pt4LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT4Right¶

HeadImpactBPillarDetailBuilder.PT4Right¶

Returns or sets the right PT4 additional geometry.

-------------------------------------

Getter Method

Signature PT4Right

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT4Right

Parameters:	pt4Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT4RightFlag¶

HeadImpactBPillarDetailBuilder.PT4RightFlag¶

Returns or sets the right PT4 additional geometry flag.

-------------------------------------

Getter Method

Signature PT4RightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT4RightFlag

Parameters:	pt4RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

ReqHorizontalLeftMax¶

HeadImpactBPillarDetailBuilder.ReqHorizontalLeftMax¶

Returns the left horizontal maximum required approach angle.

-------------------------------------

Getter Method

Signature ReqHorizontalLeftMax

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqHorizontalLeftMin¶

HeadImpactBPillarDetailBuilder.ReqHorizontalLeftMin¶

Returns the left horizontal minimum required approach angle.

-------------------------------------

Getter Method

Signature ReqHorizontalLeftMin

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqHorizontalRightMax¶

HeadImpactBPillarDetailBuilder.ReqHorizontalRightMax¶

Returns the right horizontal maximum required approach angle.

-------------------------------------

Getter Method

Signature ReqHorizontalRightMax

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqHorizontalRightMin¶

HeadImpactBPillarDetailBuilder.ReqHorizontalRightMin¶

Returns the right horizontal minimum required approach angle.

-------------------------------------

Getter Method

Signature ReqHorizontalRightMin

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqVerticalMax¶

HeadImpactBPillarDetailBuilder.ReqVerticalMax¶

Returns the vertical maximum required approach angle.

-------------------------------------

Getter Method

Signature ReqVerticalMax

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqVerticalMin¶

HeadImpactBPillarDetailBuilder.ReqVerticalMin¶

Returns the vertical minimum required approach angle.

-------------------------------------

Getter Method

Signature ReqVerticalMin

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

Method Detail¶

Validate¶

HeadImpactBPillarDetailBuilder.Validate¶

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:	Was self validation successful
Return type:	bool

New in version NX3.0.1.

License requirements: None.