HeadImpactSideRailDetailBuilder Class¶

class NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder¶

Bases: NXOpen.TaggedObject, NXOpen.GeometricUtilities.IComponentBuilder

Represents a NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder.

This is an abstract class and cannot be instantiated.

New in version NX9.0.0.

Properties¶

Property	Description
CreateGeometry	Returns or sets the create construction geometry flag.
PT11Left	Returns or sets the left PT11 additional geometry.
PT11LeftFlag	Returns or sets the left PT11 additional geometry flag.
PT11Right	Returns or sets the right PT11 additional geometry.
PT11RightFlag	Returns or sets the right PT11 additional geometry flag.
PT12Left	Returns or sets the left PT12 additional geometry.
PT12LeftFlag	Returns or sets the left PT12 additional geometry flag.
PT12Right	Returns or sets the right PT12 additional geometry.
PT12RightFlag	Returns or sets the right PT12 additional geometry flag.
PT14Left	Returns or sets the left PT14 additional geometry.
PT14LeftFlag	Returns or sets the left PT14 additional geometry flag.
PT14Right	Returns or sets the right PT14 additional geometry.
PT14RightFlag	Returns or sets the right PT14 additional geometry flag.
ReqHorizontalLeftExact	Returns the left horizontal required approach angle.
ReqHorizontalRightExact	Returns the right horizontal required approach angle.
ReqVerticalMax	Returns the vertical maximum required approach angle.
ReqVerticalMin	Returns the vertical minimum required approach angle.
SR1Left	Returns or sets the left SR1 alternative point.
SR1LeftFlag	Returns or sets the left SR1 alternative point flag.
SR1Offset	Returns the offset used to position SR1.
SR1Right	Returns or sets the right SR1 alternative point.
SR1RightFlag	Returns or sets the right SR1 alternative point flag.
SR2ALeft	Returns or sets the left SR2A alternative point.
SR2ALeftFlag	Returns or sets the left SR2A alternative point flag.
SR2ARight	Returns or sets the right SR2A alternative point.
SR2ARightFlag	Returns or sets the right SR2A alternative point flag.
SR2BLeft	Returns or sets the left SR2B alternative point.
SR2BLeftFlag	Returns or sets the left SR2B alternative point flag.
SR2BRight	Returns or sets the right SR2B alternative point.
SR2BRightFlag	Returns or sets the right SR2B alternative point flag.
SR2Left	Returns or sets the left SR2 alternative point.
SR2LeftFlag	Returns or sets the left SR2 alternative point flag.
SR2Offset	Returns the offset used to position SR2.
SR2Right	Returns or sets the right SR2 alternative point.
SR2RightFlag	Returns or sets the right SR2 alternative point flag.
Tag	Returns the Tag for this object.

Methods¶

Method	Description
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Property Detail¶

CreateGeometry¶

HeadImpactSideRailDetailBuilder.CreateGeometry¶

Returns or sets the create construction geometry flag.

-------------------------------------

Getter Method

Signature CreateGeometry

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature CreateGeometry

Parameters:	createGeometry (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT11Left¶

HeadImpactSideRailDetailBuilder.PT11Left¶

Returns or sets the left PT11 additional geometry.

-------------------------------------

Getter Method

Signature PT11Left

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT11Left

Parameters:	pt11Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT11LeftFlag¶

HeadImpactSideRailDetailBuilder.PT11LeftFlag¶

Returns or sets the left PT11 additional geometry flag.

-------------------------------------

Getter Method

Signature PT11LeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT11LeftFlag

Parameters:	pt11LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT11Right¶

HeadImpactSideRailDetailBuilder.PT11Right¶

Returns or sets the right PT11 additional geometry.

-------------------------------------

Getter Method

Signature PT11Right

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT11Right

Parameters:	pt11Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT11RightFlag¶

HeadImpactSideRailDetailBuilder.PT11RightFlag¶

Returns or sets the right PT11 additional geometry flag.

-------------------------------------

Getter Method

Signature PT11RightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT11RightFlag

Parameters:	pt11RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT12Left¶

HeadImpactSideRailDetailBuilder.PT12Left¶

Returns or sets the left PT12 additional geometry.

-------------------------------------

Getter Method

Signature PT12Left

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT12Left

Parameters:	pt12Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT12LeftFlag¶

HeadImpactSideRailDetailBuilder.PT12LeftFlag¶

Returns or sets the left PT12 additional geometry flag.

-------------------------------------

Getter Method

Signature PT12LeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT12LeftFlag

Parameters:	pt12LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT12Right¶

HeadImpactSideRailDetailBuilder.PT12Right¶

Returns or sets the right PT12 additional geometry.

-------------------------------------

Getter Method

Signature PT12Right

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT12Right

Parameters:	pt12Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT12RightFlag¶

HeadImpactSideRailDetailBuilder.PT12RightFlag¶

Returns or sets the right PT12 additional geometry flag.

-------------------------------------

Getter Method

Signature PT12RightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT12RightFlag

Parameters:	pt12RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT14Left¶

HeadImpactSideRailDetailBuilder.PT14Left¶

Returns or sets the left PT14 additional geometry.

-------------------------------------

Getter Method

Signature PT14Left

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT14Left

Parameters:	pt14Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT14LeftFlag¶

HeadImpactSideRailDetailBuilder.PT14LeftFlag¶

Returns or sets the left PT14 additional geometry flag.

-------------------------------------

Getter Method

Signature PT14LeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT14LeftFlag

Parameters:	pt14LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT14Right¶

HeadImpactSideRailDetailBuilder.PT14Right¶

Returns or sets the right PT14 additional geometry.

-------------------------------------

Getter Method

Signature PT14Right

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT14Right

Parameters:	pt14Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT14RightFlag¶

HeadImpactSideRailDetailBuilder.PT14RightFlag¶

Returns or sets the right PT14 additional geometry flag.

-------------------------------------

Getter Method

Signature PT14RightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT14RightFlag

Parameters:	pt14RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

ReqHorizontalLeftExact¶

HeadImpactSideRailDetailBuilder.ReqHorizontalLeftExact¶

Returns the left horizontal required approach angle.

-------------------------------------

Getter Method

Signature ReqHorizontalLeftExact

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqHorizontalRightExact¶

HeadImpactSideRailDetailBuilder.ReqHorizontalRightExact¶

Returns the right horizontal required approach angle.

-------------------------------------

Getter Method

Signature ReqHorizontalRightExact

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqVerticalMax¶

HeadImpactSideRailDetailBuilder.ReqVerticalMax¶

Returns the vertical maximum required approach angle.

-------------------------------------

Getter Method

Signature ReqVerticalMax

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqVerticalMin¶

HeadImpactSideRailDetailBuilder.ReqVerticalMin¶

Returns the vertical minimum required approach angle.

-------------------------------------

Getter Method

Signature ReqVerticalMin

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

SR1Left¶

HeadImpactSideRailDetailBuilder.SR1Left¶

Returns or sets the left SR1 alternative point.

-------------------------------------

Getter Method

Signature SR1Left

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR1Left

Parameters:	sr1Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR1LeftFlag¶

HeadImpactSideRailDetailBuilder.SR1LeftFlag¶

Returns or sets the left SR1 alternative point flag.

-------------------------------------

Getter Method

Signature SR1LeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR1LeftFlag

Parameters:	sr1LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR1Offset¶

HeadImpactSideRailDetailBuilder.SR1Offset¶

Returns the offset used to position SR1.

-------------------------------------

Getter Method

Signature SR1Offset

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

SR1Right¶

HeadImpactSideRailDetailBuilder.SR1Right¶

Returns or sets the right SR1 alternative point.

-------------------------------------

Getter Method

Signature SR1Right

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR1Right

Parameters:	sr1Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR1RightFlag¶

HeadImpactSideRailDetailBuilder.SR1RightFlag¶

Returns or sets the right SR1 alternative point flag.

-------------------------------------

Getter Method

Signature SR1RightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR1RightFlag

Parameters:	sr1RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2ALeft¶

HeadImpactSideRailDetailBuilder.SR2ALeft¶

Returns or sets the left SR2A alternative point.

-------------------------------------

Getter Method

Signature SR2ALeft

Returns:
Return type:	`NXOpen.Point`

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2ALeft

Parameters:	sr2aLeft (`NXOpen.Point`) –

New in version NX11.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2ALeftFlag¶

HeadImpactSideRailDetailBuilder.SR2ALeftFlag¶

Returns or sets the left SR2A alternative point flag.

-------------------------------------

Getter Method

Signature SR2ALeftFlag

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2ALeftFlag

Parameters:	sr2aLeftFlag (bool) –

New in version NX11.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2ARight¶

HeadImpactSideRailDetailBuilder.SR2ARight¶

Returns or sets the right SR2A alternative point.

-------------------------------------

Getter Method

Signature SR2ARight

Returns:
Return type:	`NXOpen.Point`

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2ARight

Parameters:	sr2aRight (`NXOpen.Point`) –

New in version NX11.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2ARightFlag¶

HeadImpactSideRailDetailBuilder.SR2ARightFlag¶

Returns or sets the right SR2A alternative point flag.

-------------------------------------

Getter Method

Signature SR2ARightFlag

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2ARightFlag

Parameters:	sr2aRightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2BLeft¶

HeadImpactSideRailDetailBuilder.SR2BLeft¶

Returns or sets the left SR2B alternative point.

-------------------------------------

Getter Method

Signature SR2BLeft

Returns:
Return type:	`NXOpen.Point`

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2BLeft

Parameters:	sr2bLeft (`NXOpen.Point`) –

New in version NX11.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2BLeftFlag¶

HeadImpactSideRailDetailBuilder.SR2BLeftFlag¶

Returns or sets the left SR2B alternative point flag.

-------------------------------------

Getter Method

Signature SR2BLeftFlag

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2BLeftFlag

Parameters:	sr2bLeftFlag (bool) –

New in version NX11.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2BRight¶

HeadImpactSideRailDetailBuilder.SR2BRight¶

Returns or sets the right SR2B alternative point.

-------------------------------------

Getter Method

Signature SR2BRight

Returns:
Return type:	`NXOpen.Point`

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2BRight

Parameters:	sr2bRight (`NXOpen.Point`) –

New in version NX11.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2BRightFlag¶

HeadImpactSideRailDetailBuilder.SR2BRightFlag¶

Returns or sets the right SR2B alternative point flag.

-------------------------------------

Getter Method

Signature SR2BRightFlag

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2BRightFlag

Parameters:	sr2bRightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2Left¶

HeadImpactSideRailDetailBuilder.SR2Left¶

Returns or sets the left SR2 alternative point.

-------------------------------------

Getter Method

Signature SR2Left

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

Deprecated since version NX11.0.0: Use NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder.SR2ALeft() instead.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2Left

Parameters:	sr2Left (`NXOpen.Point`) –

New in version NX9.0.0.

Deprecated since version NX11.0.0: Use NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder.SR2ALeft() instead.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2LeftFlag¶

HeadImpactSideRailDetailBuilder.SR2LeftFlag¶

Returns or sets the left SR2 alternative point flag.

-------------------------------------

Getter Method

Signature SR2LeftFlag

Returns:
Return type:	bool

New in version NX9.0.0.

Deprecated since version NX11.0.0: Use NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder.SR2ALeftFlag() instead.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2LeftFlag

Parameters:	sr2LeftFlag (bool) –

New in version NX9.0.0.

Deprecated since version NX11.0.0: Use NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder.SR2ALeftFlag() instead.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2Offset¶

HeadImpactSideRailDetailBuilder.SR2Offset¶

Returns the offset used to position SR2.

-------------------------------------

Getter Method

Signature SR2Offset

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

SR2Right¶

HeadImpactSideRailDetailBuilder.SR2Right¶

Returns or sets the right SR2 alternative point.

-------------------------------------

Getter Method

Signature SR2Right

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

Deprecated since version NX11.0.0: Use NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder.SR2ARight() instead.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2Right

Parameters:	sr2Right (`NXOpen.Point`) –

New in version NX9.0.0.

Deprecated since version NX11.0.0: Use NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder.SR2ARight() instead.

License requirements: nx_general_packaging (“NX General Packaging”)

SR2RightFlag¶

HeadImpactSideRailDetailBuilder.SR2RightFlag¶

Returns or sets the right SR2 alternative point flag.

-------------------------------------

Getter Method

Signature SR2RightFlag

Returns:
Return type:	bool

New in version NX9.0.0.

Deprecated since version NX11.0.0: Use NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder.SR2ARightFlag() instead.

License requirements: None.

-------------------------------------

Setter Method

Signature SR2RightFlag

Parameters:	sr2RightFlag (bool) –

New in version NX9.0.0.

Deprecated since version NX11.0.0: Use NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder.SR2ARightFlag() instead.

License requirements: nx_general_packaging (“NX General Packaging”)

Method Detail¶

Validate¶

HeadImpactSideRailDetailBuilder.Validate¶

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:	Was self validation successful
Return type:	bool

New in version NX3.0.1.

License requirements: None.