WheelCoveringBuilder Class

class NXOpen.Features.VehicleDesign.WheelCoveringBuilder

Bases: NXOpen.Features.FeatureBuilder

Represents a NXOpen.Features.VehicleDesign.WheelCovering feature builder for wheel covering surface section checking.

To create a new instance of this class, use NXOpen.Features.VehicleDesignCollection.CreateWheelCoveringBuilder()

New in version NX8.5.0.

Properties

Property	Description
DisplayIntersectionCurves	Returns or sets the display of the intersection curves.
FrontBottomOffset	Returns the bottom offset of the front surface section when the front surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.
FrontClearance	Returns the clearance of the front surface section.
FrontFrontAngle	Returns the front angle of the front surface section.
FrontFrontOffset	Returns the front offset of the front surface section when the front surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.
FrontHeight	Returns the height of the front surface section when front the surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.
FrontHubcapSelection	Returns the front hub cap selection.
FrontObjectSelection	Returns the front object selection.
FrontRadius	Returns the radius of the front surface section when the front surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.CircleSection.
FrontRearAngle	Returns the rear angle of the front surface section.
FrontRearOffset	Returns the rear offset of the front surface section when the front surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.
FrontSurfacePlane	Returns or sets the surface plane type of the front surface section.
FrontSurfaceSection	Returns or sets the surface section type of the front surface section.
Loading	Returns or sets the loading used in the wheel covering.
ParentFeatureInternal	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal
PatchSolutionFlag	Returns or sets the patch solution flag
PatchSurfaceFilename	Returns or sets the patch surface filename
Position	Returns or sets the wheel covering position.
RearBottomOffset	Returns the bottom offset of the rear surface section when the rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.
RearClearance	Returns the clearance of the rear surface section.
RearDisToWheelCenter	Returns the distance to the wheel center when rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.CircleSection.
RearFrontAngle	Returns the front angle of the rear surface section.
RearFrontOffset	Returns the front offset of the rear surface section when the rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.
RearHeight	Returns the height of the rear surface section when the rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.
RearHubcapSelection	Returns the rear hub cap selection.
RearObjectSelection	Returns the rear object selection.
RearRadius	Returns the radius of the rear surface section when the rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.CircleSection.
RearRearAngle	Returns the rear angle of the rear surface section.
RearRearOffset	Returns the rear offset of the rear surface section when the rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.
RearSurfacePlane	Returns or sets the surface plane type of the rear surface section.
RearSurfaceSection	Returns or sets the surface section type of the rear surface section.
RequirementsControl	Returns or sets the requirements control for standard driven or user defined.
Standard	Returns or sets the standard used to define the wheel covering.
SurroundingPatchSurfaceFilename	Returns or sets the surrounding patch surface filename
Tag	Returns the Tag for this object.

Methods

Method	Description
Commit	Commits any edits that have been applied to the builder.
CommitFeature	Commits the feature parameters and creates the feature
Destroy	Deletes the builder, and cleans up any objects created by the builder.
GetCommittedObjects	For builders that create more than one object, this method returns the objects that are created by commit.
GetFeature	Returns the feature currently being edited by this builder.
GetObject	Returns the object currently being edited by this builder.
HideInternalParentFeatureAfterEdit	Re-suppress an internal parent feature (a slave feature) after it has been edited.
SetParentFeatureInternal	Set the parent features which would be internal or slaves to the feature being created or commited
ShowInternalParentFeatureForEdit	Unsuppress an internal parent feature (a slave feature) so it can be edited.
ShowResults	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
UnsetParentFeatureInternal	Set the internal parent feature of the feature being edited to external
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations

WheelCoveringBuilderPositionType Enumeration	Represents the wheel covering positions.
WheelCoveringBuilderRequirementsControlType Enumeration	Represents the requirements control types to define the wheel covering.
WheelCoveringBuilderSurfacePlaneType Enumeration	Represents the type of the surface plane.
WheelCoveringBuilderSurfaceSectionType Enumeration	Represents the type of the surface section.

Property Detail

DisplayIntersectionCurves

WheelCoveringBuilder.DisplayIntersectionCurves

Returns or sets the display of the intersection curves.

-------------------------------------

Getter Method

Signature DisplayIntersectionCurves

Returns: Return type:bool

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DisplayIntersectionCurves

Parameters:displayIntersectionCurves (bool) –

New in version NX8.5.0.

License requirements: nx_general_packaging (“NX General Packaging”)

FrontBottomOffset

WheelCoveringBuilder.FrontBottomOffset

Returns the bottom offset of the front surface section when the front surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.

-------------------------------------

Getter Method

Signature FrontBottomOffset

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

FrontClearance

WheelCoveringBuilder.FrontClearance

Returns the clearance of the front surface section.

-------------------------------------

Getter Method

Signature FrontClearance

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

FrontFrontAngle

WheelCoveringBuilder.FrontFrontAngle

Returns the front angle of the front surface section.

-------------------------------------

Getter Method

Signature FrontFrontAngle

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

FrontFrontOffset

WheelCoveringBuilder.FrontFrontOffset

Returns the front offset of the front surface section when the front surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.

-------------------------------------

Getter Method

Signature FrontFrontOffset

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

FrontHeight

WheelCoveringBuilder.FrontHeight

Returns the height of the front surface section when front the surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.

-------------------------------------

Getter Method

Signature FrontHeight

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

FrontHubcapSelection

WheelCoveringBuilder.FrontHubcapSelection

Returns the front hub cap selection.

The collector contains the hub cap faces used to create the front surface section shape.

-------------------------------------

Getter Method

Signature FrontHubcapSelection

Returns: Return type:NXOpen.ScCollector

New in version NX8.5.0.

License requirements: None.

FrontObjectSelection

WheelCoveringBuilder.FrontObjectSelection

Returns the front object selection.

The collector contains the faces used to create the front intersection curves with the front surface section shape.

-------------------------------------

Getter Method

Signature FrontObjectSelection

Returns: Return type:NXOpen.ScCollector

New in version NX8.5.0.

License requirements: None.

FrontRadius

WheelCoveringBuilder.FrontRadius

Returns the radius of the front surface section when the front surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.CircleSection.

-------------------------------------

Getter Method

Signature FrontRadius

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

FrontRearAngle

WheelCoveringBuilder.FrontRearAngle

Returns the rear angle of the front surface section.

-------------------------------------

Getter Method

Signature FrontRearAngle

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

FrontRearOffset

WheelCoveringBuilder.FrontRearOffset

Returns the rear offset of the front surface section when the front surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.

-------------------------------------

Getter Method

Signature FrontRearOffset

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

FrontSurfacePlane

WheelCoveringBuilder.FrontSurfacePlane

Returns or sets the surface plane type of the front surface section.

-------------------------------------

Getter Method

Signature FrontSurfacePlane

Returns: Return type:NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfacePlaneType

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature FrontSurfacePlane

Parameters:frontSurfacePlane (NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfacePlaneType) –

New in version NX8.5.0.

License requirements: nx_general_packaging (“NX General Packaging”)

FrontSurfaceSection

WheelCoveringBuilder.FrontSurfaceSection

Returns or sets the surface section type of the front surface section.

-------------------------------------

Getter Method

Signature FrontSurfaceSection

Returns: Return type:NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature FrontSurfaceSection

Parameters:frontSurfaceSection (NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType) –

New in version NX8.5.0.

License requirements: nx_general_packaging (“NX General Packaging”)

Loading

WheelCoveringBuilder.Loading

Returns or sets the loading used in the wheel covering.

-------------------------------------

Getter Method

Signature Loading

Returns: Return type:str

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Loading

Parameters:loading (str) –

New in version NX8.5.0.

License requirements: nx_general_packaging (“NX General Packaging”)

Position

WheelCoveringBuilder.Position

Returns or sets the wheel covering position.

-------------------------------------

Getter Method

Signature Position

Returns: Return type:NXOpen.Features.VehicleDesign.WheelCoveringBuilderPositionType

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Position

Parameters:position (NXOpen.Features.VehicleDesign.WheelCoveringBuilderPositionType) –

New in version NX8.5.0.

License requirements: nx_general_packaging (“NX General Packaging”)

RearBottomOffset

WheelCoveringBuilder.RearBottomOffset

Returns the bottom offset of the rear surface section when the rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.

-------------------------------------

Getter Method

Signature RearBottomOffset

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

RearClearance

WheelCoveringBuilder.RearClearance

Returns the clearance of the rear surface section.

-------------------------------------

Getter Method

Signature RearClearance

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

RearDisToWheelCenter

WheelCoveringBuilder.RearDisToWheelCenter

Returns the distance to the wheel center when rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.CircleSection.

-------------------------------------

Getter Method

Signature RearDisToWheelCenter

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

RearFrontAngle

WheelCoveringBuilder.RearFrontAngle

Returns the front angle of the rear surface section.

-------------------------------------

Getter Method

Signature RearFrontAngle

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

RearFrontOffset

WheelCoveringBuilder.RearFrontOffset

Returns the front offset of the rear surface section when the rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.

-------------------------------------

Getter Method

Signature RearFrontOffset

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

RearHeight

WheelCoveringBuilder.RearHeight

Returns the height of the rear surface section when the rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.

-------------------------------------

Getter Method

Signature RearHeight

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

RearHubcapSelection

WheelCoveringBuilder.RearHubcapSelection

Returns the rear hub cap selection.

The collector contains the hub cap faces used to create the rear surface section shape.

-------------------------------------

Getter Method

Signature RearHubcapSelection

Returns: Return type:NXOpen.ScCollector

New in version NX8.5.0.

License requirements: None.

RearObjectSelection

WheelCoveringBuilder.RearObjectSelection

Returns the rear object selection.

The collector contains the faces used to create the rear intersection curves with the rear surface section shape.

-------------------------------------

Getter Method

Signature RearObjectSelection

Returns: Return type:NXOpen.ScCollector

New in version NX8.5.0.

License requirements: None.

RearRadius

WheelCoveringBuilder.RearRadius

Returns the radius of the rear surface section when the rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.CircleSection.

-------------------------------------

Getter Method

Signature RearRadius

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

RearRearAngle

WheelCoveringBuilder.RearRearAngle

Returns the rear angle of the rear surface section.

-------------------------------------

Getter Method

Signature RearRearAngle

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

RearRearOffset

WheelCoveringBuilder.RearRearOffset

Returns the rear offset of the rear surface section when the rear surface section type is NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType.Adr42.

-------------------------------------

Getter Method

Signature RearRearOffset

Returns: Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

RearSurfacePlane

WheelCoveringBuilder.RearSurfacePlane

Returns or sets the surface plane type of the rear surface section.

-------------------------------------

Getter Method

Signature RearSurfacePlane

Returns: Return type:NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfacePlaneType

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RearSurfacePlane

Parameters:rearSurfacePlane (NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfacePlaneType) –

New in version NX8.5.0.

License requirements: nx_general_packaging (“NX General Packaging”)

RearSurfaceSection

WheelCoveringBuilder.RearSurfaceSection

Returns or sets the surface section type of the rear surface section.

-------------------------------------

Getter Method

Signature RearSurfaceSection

Returns: Return type:NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RearSurfaceSection

Parameters:rearSurfaceSection (NXOpen.Features.VehicleDesign.WheelCoveringBuilderSurfaceSectionType) –

New in version NX8.5.0.

License requirements: nx_general_packaging (“NX General Packaging”)

RequirementsControl

WheelCoveringBuilder.RequirementsControl

Returns or sets the requirements control for standard driven or user defined.

-------------------------------------

Getter Method

Signature RequirementsControl

Returns: Return type:NXOpen.Features.VehicleDesign.WheelCoveringBuilderRequirementsControlType

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RequirementsControl

Parameters:requirement (NXOpen.Features.VehicleDesign.WheelCoveringBuilderRequirementsControlType) –

New in version NX8.5.0.

License requirements: nx_general_packaging (“NX General Packaging”)

Standard

WheelCoveringBuilder.Standard

Returns or sets the standard used to define the wheel covering.

-------------------------------------

Getter Method

Signature Standard

Returns: Return type:str

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Standard

Parameters:standard (str) –

New in version NX8.5.0.

License requirements: nx_general_packaging (“NX General Packaging”)

Method Detail

Validate

WheelCoveringBuilder.Validate

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:Was self validation successful Return type:bool

New in version NX3.0.1.

License requirements: None.