ColumnGridEquipmentBuilder Class¶

class NXOpen.LineDesigner.ColumnGridEquipmentBuilder¶

Bases: NXOpen.Builder

Represents a LineDesigner.

ColumnGridEquipment builder

To create a new instance of this class, use NXOpen.LineDesigner.LineDesignerManager.CreateColumnGridEquipmentBuilder()

Default values.

Property	Value
BubbleDiameter	1200
BubbleExtension	750
BubbleExtensionOffset	400
BubbleLeader	750
ColumnBaseDepth.Value	800 (millimeters part), 32 (inches part)
ColumnBaseDiameter.Value	800 (millimeters part), 32 (inches part)
ColumnBaseHeight.Value	900 (millimeters part), 35 (inches part)
ColumnBaseLowerDiameter.Value	900 (millimeters part), 32 (inches part)
ColumnBaseTypeEnum	None
ColumnBaseUpperDiameter.Value	800 (millimeters part), 32 (inches part)
ColumnBaseWidth.Value	800 (millimeters part), 35 (inches part)
ColumnDepth.Value	600 (millimeters part), 25 (inches part)
ColumnDiameter.Value	800 (millimeters part), 25 (inches part)
ColumnDisplayIDs	1
ColumnElevation.Value	0 (millimeters part), 0 (inches part)
ColumnHeight.Value	3000 (millimeters part), 120 (inches part)
ColumnRotate90Degrees	0
ColumnSpacingDouble	15000
ColumnThickness.Value	30 (millimeters part), 2 (inches part)
ColumnTypeEnum	IBeam
ColumnWideNumber	1
ColumnWidth.Value	600 (millimeters part), 12 (inches part)
CreateBottomBubblesToggle	1
CreateLeftBubblesToggle	1
CreateRightBubblesToggle	1
CreateTopBubblesToggle	1
DefineGlobalSizeToggle	1
DisplayGridToggle	1
RowDeepNumber	1
RowSpacingDouble	15000
SelectGridArea.AllowRotation	1
UseSpacingToggle	1

New in version NX9.0.0.

Properties¶

Property	Description
BubbleDiameter	Returns or sets the value of bubble diameter in column grid
BubbleExtension	Returns or sets the value of bubble extension of column grid
BubbleExtensionOffset	Returns or sets the bubble extension offset value of column grid
BubbleLeader	Returns or sets the bubble leader
BubblesUnallowedChars	Returns or sets the bubbles unallowed characters in column grid
ColumnBaseCrossSection	Returns the column base cross section of column grid
ColumnBaseDepth	Returns the column base depth of column grid
ColumnBaseDiameter	Returns the column base diameter of column grid
ColumnBaseHeight	Returns the column base height of column grid
ColumnBaseLowerDiameter	Returns the column base lower diameter of column grid
ColumnBaseTypeEnum	Returns or sets the column base type of column grid
ColumnBaseUpperDiameter	Returns the column base upper diameter of column grid
ColumnBaseWidth	Returns the column base width of column grid
ColumnCrossSection	Returns the column cross section of columns of column grid
ColumnDataList	Returns the column data list
ColumnDepth	Returns the column depth of column grid
ColumnDiameter	Returns the column diameter of column grid
ColumnDisplayIDs	Returns or sets the status of column display ids in column grid
ColumnElevation	Returns the column elevation of column grid
ColumnHeight	Returns the column height of columns of column grid
ColumnRotate90Degrees	Returns or sets the status of 90 degree column rotation for column grid
ColumnSpacingDouble	Returns or sets the spacing between columns
ColumnThickness	Returns the column thickness of coulmn grid
ColumnTypeEnum	Returns or sets the column type of column grid
ColumnWideNumber	Returns or sets the number of column of columns in column grid
ColumnWidth	Returns the column width of column grid
CreateBottomBubblesToggle	Returns or sets the status to create bottom bubbles of column grid
CreateLeftBubblesToggle	Returns or sets the status to create left bubbles of column grid
CreateRightBubblesToggle	Returns or sets the status to create right bubbles of column grid
CreateTopBubblesToggle	Returns or sets the status to create top bubbles in column grid
DefineGlobalSizeToggle	Returns or sets the define global size toggle of column grid
DisplayGridToggle	Returns or sets the display grid status of column grid
KfObject	Returns the kf object
RowDataList	Returns the row data list
RowDeepNumber	Returns or sets the number of rows of columns in column grid
RowSpacingDouble	Returns or sets the value of row spacing between columns
SelectGridArea	Returns or sets the selected grid area of column grid
Tag	Returns the Tag for this object.
UseSpacingToggle	Returns or sets the status for using column row spacing of column grid

Methods¶

Method	Description
Commit	Commits any edits that have been applied to the builder.
Destroy	Deletes the builder, and cleans up any objects created by the builder.
GetCommittedObjects	For builders that create more than one object, this method returns the objects that are created by commit.
GetObject	Returns the object currently being edited by this builder.
ModifyColumnsButton	TODO: fill in a description for this
ShowResults	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations¶

ColumnGridEquipmentBuilderColumnBaseType Enumeration	This enum is providing possible column base types
ColumnGridEquipmentBuilderColumnType Enumeration	This enum is providing possible column types

Property Detail¶

BubbleDiameter¶

ColumnGridEquipmentBuilder.BubbleDiameter¶

Returns or sets the value of bubble diameter in column grid

-------------------------------------

Getter Method

Signature BubbleDiameter

Returns:
Return type:	float

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature BubbleDiameter

Parameters:	bubbleDiameter (float) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

BubbleExtension¶

ColumnGridEquipmentBuilder.BubbleExtension¶

Returns or sets the value of bubble extension of column grid

-------------------------------------

Getter Method

Signature BubbleExtension

Returns:
Return type:	float

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature BubbleExtension

Parameters:	bubbleExtension (float) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

BubbleExtensionOffset¶

ColumnGridEquipmentBuilder.BubbleExtensionOffset¶

Returns or sets the bubble extension offset value of column grid

-------------------------------------

Getter Method

Signature BubbleExtensionOffset

Returns:
Return type:	float

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature BubbleExtensionOffset

Parameters:	bubbleExtensionOffset (float) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

BubbleLeader¶

ColumnGridEquipmentBuilder.BubbleLeader¶

Returns or sets the bubble leader

-------------------------------------

Getter Method

Signature BubbleLeader

Returns:
Return type:	float

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature BubbleLeader

Parameters:	bubbleLeader (float) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

BubblesUnallowedChars¶

ColumnGridEquipmentBuilder.BubblesUnallowedChars¶

Returns or sets the bubbles unallowed characters in column grid

-------------------------------------

Getter Method

Signature BubblesUnallowedChars

Returns:
Return type:	str

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature BubblesUnallowedChars

Parameters:	bubblesUnallowedChars (str) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnBaseCrossSection¶

ColumnGridEquipmentBuilder.ColumnBaseCrossSection¶

Returns the column base cross section of column grid

-------------------------------------

Getter Method

Signature ColumnBaseCrossSection

Returns:
Return type:	`NXOpen.Section`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnBaseDepth¶

ColumnGridEquipmentBuilder.ColumnBaseDepth¶

Returns the column base depth of column grid

-------------------------------------

Getter Method

Signature ColumnBaseDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnBaseDiameter¶

ColumnGridEquipmentBuilder.ColumnBaseDiameter¶

Returns the column base diameter of column grid

-------------------------------------

Getter Method

Signature ColumnBaseDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnBaseHeight¶

ColumnGridEquipmentBuilder.ColumnBaseHeight¶

Returns the column base height of column grid

-------------------------------------

Getter Method

Signature ColumnBaseHeight

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnBaseLowerDiameter¶

ColumnGridEquipmentBuilder.ColumnBaseLowerDiameter¶

Returns the column base lower diameter of column grid

-------------------------------------

Getter Method

Signature ColumnBaseLowerDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnBaseTypeEnum¶

ColumnGridEquipmentBuilder.ColumnBaseTypeEnum¶

Returns or sets the column base type of column grid

-------------------------------------

Getter Method

Signature ColumnBaseTypeEnum

Returns:
Return type:	`NXOpen.LineDesigner.ColumnGridEquipmentBuilderColumnBaseType`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature ColumnBaseTypeEnum

Parameters:	columnBaseTypeEnum (`NXOpen.LineDesigner.ColumnGridEquipmentBuilderColumnBaseType`) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnBaseUpperDiameter¶

ColumnGridEquipmentBuilder.ColumnBaseUpperDiameter¶

Returns the column base upper diameter of column grid

-------------------------------------

Getter Method

Signature ColumnBaseUpperDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnBaseWidth¶

ColumnGridEquipmentBuilder.ColumnBaseWidth¶

Returns the column base width of column grid

-------------------------------------

Getter Method

Signature ColumnBaseWidth

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnCrossSection¶

ColumnGridEquipmentBuilder.ColumnCrossSection¶

Returns the column cross section of columns of column grid

-------------------------------------

Getter Method

Signature ColumnCrossSection

Returns:
Return type:	`NXOpen.Section`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnDataList¶

ColumnGridEquipmentBuilder.ColumnDataList¶

Returns the column data list

-------------------------------------

Getter Method

Signature ColumnDataList

Returns:
Return type:	`NXOpen.NXObjectList`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnDepth¶

ColumnGridEquipmentBuilder.ColumnDepth¶

Returns the column depth of column grid

-------------------------------------

Getter Method

Signature ColumnDepth

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnDiameter¶

ColumnGridEquipmentBuilder.ColumnDiameter¶

Returns the column diameter of column grid

-------------------------------------

Getter Method

Signature ColumnDiameter

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnDisplayIDs¶

ColumnGridEquipmentBuilder.ColumnDisplayIDs¶

Returns or sets the status of column display ids in column grid

-------------------------------------

Getter Method

Signature ColumnDisplayIDs

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature ColumnDisplayIDs

Parameters:	columnDisplayIDs (bool) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnElevation¶

ColumnGridEquipmentBuilder.ColumnElevation¶

Returns the column elevation of column grid

-------------------------------------

Getter Method

Signature ColumnElevation

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnHeight¶

ColumnGridEquipmentBuilder.ColumnHeight¶

Returns the column height of columns of column grid

-------------------------------------

Getter Method

Signature ColumnHeight

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnRotate90Degrees¶

ColumnGridEquipmentBuilder.ColumnRotate90Degrees¶

Returns or sets the status of 90 degree column rotation for column grid

-------------------------------------

Getter Method

Signature ColumnRotate90Degrees

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature ColumnRotate90Degrees

Parameters:	columnRotate90Degrees (bool) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnSpacingDouble¶

ColumnGridEquipmentBuilder.ColumnSpacingDouble¶

Returns or sets the spacing between columns

-------------------------------------

Getter Method

Signature ColumnSpacingDouble

Returns:
Return type:	float

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature ColumnSpacingDouble

Parameters:	columnSpacingDouble (float) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnThickness¶

ColumnGridEquipmentBuilder.ColumnThickness¶

Returns the column thickness of coulmn grid

-------------------------------------

Getter Method

Signature ColumnThickness

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnTypeEnum¶

ColumnGridEquipmentBuilder.ColumnTypeEnum¶

Returns or sets the column type of column grid

-------------------------------------

Getter Method

Signature ColumnTypeEnum

Returns:
Return type:	`NXOpen.LineDesigner.ColumnGridEquipmentBuilderColumnType`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature ColumnTypeEnum

Parameters:	columnTypeEnum (`NXOpen.LineDesigner.ColumnGridEquipmentBuilderColumnType`) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnWideNumber¶

ColumnGridEquipmentBuilder.ColumnWideNumber¶

Returns or sets the number of column of columns in column grid

-------------------------------------

Getter Method

Signature ColumnWideNumber

Returns:
Return type:	int

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature ColumnWideNumber

Parameters:	columnWideNumber (int) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

ColumnWidth¶

ColumnGridEquipmentBuilder.ColumnWidth¶

Returns the column width of column grid

-------------------------------------

Getter Method

Signature ColumnWidth

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateBottomBubblesToggle¶

ColumnGridEquipmentBuilder.CreateBottomBubblesToggle¶

Returns or sets the status to create bottom bubbles of column grid

-------------------------------------

Getter Method

Signature CreateBottomBubblesToggle

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature CreateBottomBubblesToggle

Parameters:	createBottomBubblesToggle (bool) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateLeftBubblesToggle¶

ColumnGridEquipmentBuilder.CreateLeftBubblesToggle¶

Returns or sets the status to create left bubbles of column grid

-------------------------------------

Getter Method

Signature CreateLeftBubblesToggle

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature CreateLeftBubblesToggle

Parameters:	createLeftBubblesToggle (bool) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateRightBubblesToggle¶

ColumnGridEquipmentBuilder.CreateRightBubblesToggle¶

Returns or sets the status to create right bubbles of column grid

-------------------------------------

Getter Method

Signature CreateRightBubblesToggle

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature CreateRightBubblesToggle

Parameters:	createRightBubblesToggle (bool) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateTopBubblesToggle¶

ColumnGridEquipmentBuilder.CreateTopBubblesToggle¶

Returns or sets the status to create top bubbles in column grid

-------------------------------------

Getter Method

Signature CreateTopBubblesToggle

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature CreateTopBubblesToggle

Parameters:	createTopBubblesToggle (bool) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

DefineGlobalSizeToggle¶

ColumnGridEquipmentBuilder.DefineGlobalSizeToggle¶

Returns or sets the define global size toggle of column grid

-------------------------------------

Getter Method

Signature DefineGlobalSizeToggle

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature DefineGlobalSizeToggle

Parameters:	defineGlobalSizeToggle (bool) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

DisplayGridToggle¶

ColumnGridEquipmentBuilder.DisplayGridToggle¶

Returns or sets the display grid status of column grid

-------------------------------------

Getter Method

Signature DisplayGridToggle

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature DisplayGridToggle

Parameters:	displayGridToggle (bool) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

KfObject¶

ColumnGridEquipmentBuilder.KfObject¶

Returns the kf object

-------------------------------------

Getter Method

Signature KfObject

Returns:
Return type:	`NXOpen.KFObject`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

RowDataList¶

ColumnGridEquipmentBuilder.RowDataList¶

Returns the row data list

-------------------------------------

Getter Method

Signature RowDataList

Returns:
Return type:	`NXOpen.NXObjectList`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

RowDeepNumber¶

ColumnGridEquipmentBuilder.RowDeepNumber¶

Returns or sets the number of rows of columns in column grid

-------------------------------------

Getter Method

Signature RowDeepNumber

Returns:
Return type:	int

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature RowDeepNumber

Parameters:	rowDeepNumber (int) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

RowSpacingDouble¶

ColumnGridEquipmentBuilder.RowSpacingDouble¶

Returns or sets the value of row spacing between columns

-------------------------------------

Getter Method

Signature RowSpacingDouble

Returns:
Return type:	float

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature RowSpacingDouble

Parameters:	rowSpacingDouble (float) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

SelectGridArea¶

ColumnGridEquipmentBuilder.SelectGridArea¶

Returns or sets the selected grid area of column grid

-------------------------------------

Getter Method

Signature SelectGridArea

Returns:
Return type:	`NXOpen.LineDesigner.PickRectanglePointsBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature SelectGridArea

Parameters:	selectGridArea (`NXOpen.LineDesigner.PickRectanglePointsBuilder`) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

UseSpacingToggle¶

ColumnGridEquipmentBuilder.UseSpacingToggle¶

Returns or sets the status for using column row spacing of column grid

-------------------------------------

Getter Method

Signature UseSpacingToggle

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Setter Method

Signature UseSpacingToggle

Parameters:	useSpacingToggle (bool) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

Method Detail¶

ModifyColumnsButton¶

ColumnGridEquipmentBuilder.ModifyColumnsButton¶

TODO: fill in a description for this

Signature ModifyColumnsButton()

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

Validate¶

ColumnGridEquipmentBuilder.Validate¶

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:	Was self validation successful
Return type:	bool

New in version NX3.0.1.

License requirements: None.