LineDesignerManager Class¶

class NXOpen.LineDesigner.LineDesignerManager¶

Bases: object

Represents a manager of line designer builders

Use the static method in this class to obtain an instance.

New in version NX9.0.0.

Methods¶

Method	Description
ConsolidateUndoMarks	Consolidate Undo Marks
CreateApplicationBuilder	Create the application builder
CreateColumnFeatureBuilder	Create column feature builder
CreateColumnGridEquipmentBuilder	Create column grid equipment Builder
CreateConnectionCreatorBuilder	Create Connection Creator Builder
CreateConveyorStationFeatureBuilder	Create conveyor station feature builder
CreateCoverFeatureBuilder	Create CoverFeature builder
CreateCreateFactoryElementBuilder	Create factory element builder
CreateCreateFenceBuilder	Create fence builder
CreateCreateSystemBuilder	Create system builder
CreateDisconnectConnectionBuilder	Create Disconnect Connection Builder
CreateExportPlantToDwgBuilder	Create the export plant to DWG builder
CreateExportToDwgBuilder	Creates the export to DWG builder
CreateFactorycadgeoequipmentBuilder	To create a rename factory cad geo equipment builder
CreateFactorycadgeoequipmentassemblyBuilder	To create a rename factory cad geo equipment assembly builder
CreateFloorequipmentBuilder	Create Floor builder
CreateGateFeatureBuilder	Create GateFeature builder
CreateGlobalSelectionBuilder	Create global selection builder
CreateHoleFeatureBuilder	Create HoleFeature builder
CreateImportFactoryCadGeoBuilder	To get the import factory cad geo builder
CreateInsertSheetBuilder	Creates the insert sheet builder
CreateJigOnPlaneBuilder	Create the jig on plane builder
CreatePickRectanglePointsBuilder	Create pick rectangle points builder
CreatePlanViewManagerInstance	Creates the plan view manager instance
CreatePlatformEquipmentBuilder	Create Platform Equipment Builder
CreateProductionUnitCreatorBuilder	Create production unit creator builder
CreateRailOpeningFeatureBuilder	Create rail opening feature builder
CreateRailingFeatureBuilder	Create railing feature builder
CreateRenameDialogeBuilder	Creates a Rename Dialoge Builder
CreateRenameItemRevisionBuilder	To create a rename ItemRevision Builder
CreateResizeConnectorBuilder	Create resize connector Builder
CreateSingleElementConveyorBuilder	Create single element conveyor builder
CreateStairwayEquipmentBuilder	Create StairwayEquipment builder
CreateTypedConnectorFeatureBuilder	Create typed connector feature builder
DrawingSheetBuilder	Create the drawing sheet builder
GetApplicationBuilder	Application builder is return
GetFastPlacementUtilityBuilder	Get the fast placement utility builder
GetReuseLibraryUtilityBuilder	Returns the reuse library utility builder
PlantCreateProductionUnitCreatorBuilder	To create a new navigator production unit builder

Method Detail¶

ConsolidateUndoMarks¶

LineDesignerManager.ConsolidateUndoMarks¶

Consolidate Undo Marks

Signature ConsolidateUndoMarks(undoMarkId)

Parameters:	undoMarkId (int) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateApplicationBuilder¶

LineDesignerManager.CreateApplicationBuilder¶

Create the application builder

Signature CreateApplicationBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.LineDesignerApplicationBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateColumnFeatureBuilder¶

LineDesignerManager.CreateColumnFeatureBuilder¶

Overloaded method CreateColumnFeatureBuilder

CreateColumnFeatureBuilder(part, columnFeature)
CreateColumnFeatureBuilder(part, node)

-------------------------------------

Create column feature builder

Signature CreateColumnFeatureBuilder(part, columnFeature)

Parameters:	part (`NXOpen.Part`) – columnFeature (`NXOpen.LineDesigner.ColumnFeature`) – `LineDesigner.ColumnFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.ColumnFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Create column feature builder inside a node or using node

Signature CreateColumnFeatureBuilder(part, node)

Parameters:	part (`NXOpen.Part`) – node (`NXOpen.LineDesigner.DBNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.ColumnFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

CreateColumnGridEquipmentBuilder¶

LineDesignerManager.CreateColumnGridEquipmentBuilder¶

Create column grid equipment Builder

Signature CreateColumnGridEquipmentBuilder(part, dbnode)

Parameters:	part (`NXOpen.Part`) – dbnode (`NXOpen.LineDesigner.DBColumnGridNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.ColumnGridEquipmentBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateConnectionCreatorBuilder¶

LineDesignerManager.CreateConnectionCreatorBuilder¶

Create Connection Creator Builder

Signature CreateConnectionCreatorBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.ConnectionCreatorBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateConveyorStationFeatureBuilder¶

LineDesignerManager.CreateConveyorStationFeatureBuilder¶

Create conveyor station feature builder

Signature CreateConveyorStationFeatureBuilder(part, railingFeature)

Parameters:	part (`NXOpen.Part`) – railingFeature (`NXOpen.LineDesigner.ConveyorStationFeature`) – `LineDesigner.ConveyorStationFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.ConveyorStationFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateCoverFeatureBuilder¶

LineDesignerManager.CreateCoverFeatureBuilder¶

Create CoverFeature builder

Signature CreateCoverFeatureBuilder(part, coverFeature)

Parameters:	part (`NXOpen.Part`) – coverFeature (`NXOpen.LineDesigner.CoverFeature`) – `LineDesigner.CoverFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.CoverFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateCreateFactoryElementBuilder¶

LineDesignerManager.CreateCreateFactoryElementBuilder¶

Create factory element builder

Signature CreateCreateFactoryElementBuilder(part, createFactoryElement)

Parameters:	part (`NXOpen.Part`) – createFactoryElement (`NXOpen.LineDesigner.CreateFactoryElement`) – `LineDesigner.CreateFactoryElement` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.CreateFactoryElementBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateCreateFenceBuilder¶

LineDesignerManager.CreateCreateFenceBuilder¶

Create fence builder

Signature CreateCreateFenceBuilder(part, createFence)

Parameters:	part (`NXOpen.Part`) – createFence (`NXOpen.LineDesigner.CreateFence`) – `LineDesigner.CreateFence` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.CreateFenceBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateCreateSystemBuilder¶

LineDesignerManager.CreateCreateSystemBuilder¶

Create system builder

Signature CreateCreateSystemBuilder(part, createSystem)

Parameters:	part (`NXOpen.Part`) – createSystem (`NXOpen.LineDesigner.CreateSystem`) – `LineDesigner.CreateSystem` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.CreateSystemBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateDisconnectConnectionBuilder¶

LineDesignerManager.CreateDisconnectConnectionBuilder¶

Create Disconnect Connection Builder

Signature CreateDisconnectConnectionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.DisconnectConnectionBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateExportPlantToDwgBuilder¶

LineDesignerManager.CreateExportPlantToDwgBuilder¶

Create the export plant to DWG builder

Signature CreateExportPlantToDwgBuilder(part, exportPlantToDwg)

Parameters:	part (`NXOpen.Part`) – exportPlantToDwg (`NXOpen.LineDesigner.ExportPlantToDWG`) – `LineDesigner.ExportPlantToDWG` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.ExportPlantToDWGBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateExportToDwgBuilder¶

LineDesignerManager.CreateExportToDwgBuilder¶

Creates the export to DWG builder

Signature CreateExportToDwgBuilder(part, exportToDwg)

Parameters:	part (`NXOpen.Part`) – exportToDwg (`NXOpen.LineDesigner.ExportToDWG`) – `LineDesigner.ExportToDWG` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.ExportToDWGBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateFactorycadgeoequipmentBuilder¶

LineDesignerManager.CreateFactorycadgeoequipmentBuilder¶

To create a rename factory cad geo equipment builder

Signature CreateFactorycadgeoequipmentBuilder(part, dbnode)

Parameters:	part (`NXOpen.Part`) – dbnode (`NXOpen.LineDesigner.DBFactoryCadGeoNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.FactoryCadGeoEquipmentBuilder`

New in version NX11.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateFactorycadgeoequipmentassemblyBuilder¶

LineDesignerManager.CreateFactorycadgeoequipmentassemblyBuilder¶

To create a rename factory cad geo equipment assembly builder

Signature CreateFactorycadgeoequipmentassemblyBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.FactoryCadGeoEquipmentBuilder`

New in version NX11.0.1.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateFloorequipmentBuilder¶

LineDesignerManager.CreateFloorequipmentBuilder¶

Create Floor builder

Signature CreateFloorequipmentBuilder(part, dbnode)

Parameters:	part (`NXOpen.Part`) – dbnode (`NXOpen.LineDesigner.DBFloorEquipmentNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.FloorEquipmentBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateGateFeatureBuilder¶

LineDesignerManager.CreateGateFeatureBuilder¶

Create GateFeature builder

Signature CreateGateFeatureBuilder(part, coverFeature)

Parameters:	part (`NXOpen.Part`) – coverFeature (`NXOpen.LineDesigner.GateFeature`) – `LineDesigner.GateFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.GateFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateGlobalSelectionBuilder¶

LineDesignerManager.CreateGlobalSelectionBuilder¶

Create global selection builder

Signature CreateGlobalSelectionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.GlobalSelectionBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateHoleFeatureBuilder¶

LineDesignerManager.CreateHoleFeatureBuilder¶

Create HoleFeature builder

Signature CreateHoleFeatureBuilder(part, holeFeature)

Parameters:	part (`NXOpen.Part`) – holeFeature (`NXOpen.LineDesigner.HoleFeature`) – `LineDesigner.HoleFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.HoleFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateImportFactoryCadGeoBuilder¶

LineDesignerManager.CreateImportFactoryCadGeoBuilder¶

To get the import factory cad geo builder

Signature CreateImportFactoryCadGeoBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.ImportFactoryCadGeoBuilder`

New in version NX11.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateInsertSheetBuilder¶

LineDesignerManager.CreateInsertSheetBuilder¶

Creates the insert sheet builder

Signature CreateInsertSheetBuilder(part, insertSheet)

Parameters:	part (`NXOpen.Part`) – insertSheet (`NXOpen.LineDesigner.InsertSheet`) – `LineDesigner.InsertSheet` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.InsertSheetBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateJigOnPlaneBuilder¶

LineDesignerManager.CreateJigOnPlaneBuilder¶

Create the jig on plane builder

Signature CreateJigOnPlaneBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.JigOnPlaneBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreatePickRectanglePointsBuilder¶

LineDesignerManager.CreatePickRectanglePointsBuilder¶

Create pick rectangle points builder

Signature CreatePickRectanglePointsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.PickRectanglePointsBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreatePlanViewManagerInstance¶

LineDesignerManager.CreatePlanViewManagerInstance¶

Creates the plan view manager instance

Signature CreatePlanViewManagerInstance(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.PlanViewManager`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreatePlatformEquipmentBuilder¶

LineDesignerManager.CreatePlatformEquipmentBuilder¶

Create Platform Equipment Builder

Signature CreatePlatformEquipmentBuilder(part, dbnode)

Parameters:	part (`NXOpen.Part`) – dbnode (`NXOpen.LineDesigner.DBPlatformEquipmentNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.PlatformEquipmentBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateProductionUnitCreatorBuilder¶

LineDesignerManager.CreateProductionUnitCreatorBuilder¶

Create production unit creator builder

Signature CreateProductionUnitCreatorBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.ProductionUnitCreatorBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateRailOpeningFeatureBuilder¶

LineDesignerManager.CreateRailOpeningFeatureBuilder¶

Create rail opening feature builder

Signature CreateRailOpeningFeatureBuilder(part, railingFeature)

Parameters:	part (`NXOpen.Part`) – railingFeature (`NXOpen.LineDesigner.RailOpeningFeature`) – `LineDesigner.RailOpeningFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.RailOpeningFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateRailingFeatureBuilder¶

LineDesignerManager.CreateRailingFeatureBuilder¶

Overloaded method CreateRailingFeatureBuilder

CreateRailingFeatureBuilder(part, railingFeature)
CreateRailingFeatureBuilder(part, node)

-------------------------------------

Create railing feature builder

Signature CreateRailingFeatureBuilder(part, railingFeature)

Parameters:	part (`NXOpen.Part`) – railingFeature (`NXOpen.LineDesigner.RailingFeature`) – `LineDesigner.RailingFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.RailingFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Create railing feature builder

Signature CreateRailingFeatureBuilder(part, node)

Parameters:	part (`NXOpen.Part`) – node (`NXOpen.LineDesigner.DBNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.RailingFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

CreateRenameDialogeBuilder¶

LineDesignerManager.CreateRenameDialogeBuilder¶

Creates a Rename Dialoge Builder

Signature CreateRenameDialogeBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.RenameDialogeBuilder`

New in version NX11.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateRenameItemRevisionBuilder¶

LineDesignerManager.CreateRenameItemRevisionBuilder¶

To create a rename ItemRevision Builder

Signature CreateRenameItemRevisionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.RenameItemRevisionBuilder`

New in version NX10.0.3.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateResizeConnectorBuilder¶

LineDesignerManager.CreateResizeConnectorBuilder¶

Create resize connector Builder

Signature CreateResizeConnectorBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.ResizeConnectorBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateSingleElementConveyorBuilder¶

LineDesignerManager.CreateSingleElementConveyorBuilder¶

Create single element conveyor builder

Signature CreateSingleElementConveyorBuilder(part, node)

Parameters:	part (`NXOpen.Part`) – node (`NXOpen.LineDesigner.DBConveyorNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.SingleElementConveyorBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateStairwayEquipmentBuilder¶

LineDesignerManager.CreateStairwayEquipmentBuilder¶

Create StairwayEquipment builder

Signature CreateStairwayEquipmentBuilder(part, dbnode)

Parameters:	part (`NXOpen.Part`) – dbnode (`NXOpen.LineDesigner.DBStairwayEquipmentNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.StairwayEquipmentBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateTypedConnectorFeatureBuilder¶

LineDesignerManager.CreateTypedConnectorFeatureBuilder¶

Create typed connector feature builder

Signature CreateTypedConnectorFeatureBuilder(part, typedConnectorFeature)

Parameters:	part (`NXOpen.Part`) – typedConnectorFeature (`NXOpen.LineDesigner.TypedConnectorFeature`) – `LineDesigner.TypedConnectorFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.TypedConnectorFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

DrawingSheetBuilder¶

LineDesignerManager.DrawingSheetBuilder¶

Create the drawing sheet builder

Signature DrawingSheetBuilder(owningPart, sheet)

Parameters:	owningPart (`NXOpen.Part`) – sheet (`NXOpen.Drawings.DrawingSheet`) – the drawing sheet
Returns:	the drawing sheet Builder with this identifier
Return type:	`NXOpen.Drawings.DrawingSheetBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

GetApplicationBuilder¶

LineDesignerManager.GetApplicationBuilder¶

Application builder is return

Signature GetApplicationBuilder()

Returns:
Return type:	`NXOpen.LineDesigner.LineDesignerApplicationBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

GetFastPlacementUtilityBuilder¶

LineDesignerManager.GetFastPlacementUtilityBuilder¶

Get the fast placement utility builder

Signature GetFastPlacementUtilityBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.FastPlacementUtilityBuilder`

New in version NX10.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

GetReuseLibraryUtilityBuilder¶

LineDesignerManager.GetReuseLibraryUtilityBuilder¶

Returns the reuse library utility builder

Signature GetReuseLibraryUtilityBuilder()

Returns:
Return type:	`NXOpen.LineDesigner.ReuseLibraryUtilityBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

PlantCreateProductionUnitCreatorBuilder¶

LineDesignerManager.PlantCreateProductionUnitCreatorBuilder¶

To create a new navigator production unit builder

Signature PlantCreateProductionUnitCreatorBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.PlantProductionUnitCreatorBuilder`

New in version NX12.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)