TirePropertyCdBuilder Class¶

class NXOpen.Motion.TirePropertyCdBuilder¶

Bases: NXOpen.Motion.TirePropertyBuilder

Represents a Motion.TirePropertyCd builder

To create a new instance of this class, use NXOpen.Motion.TirePropertyCdCollection.CreateTirePropertyCdBuilder()

Default values.

Property	Value
AmbientTempTypeSelection	TireParameterFile
AmbientTempValue.Value	0.0 (millimeters part), 0.0 (inches part)
ContactLengthWidth	0
ContactPointGlobal	0
ContactPointRoadRef	1
CorrectorIter.Value	0 (millimeters part), 0 (inches part)
EnergyLoss (deprecated)	0
Inclination	1
InflationPressureTypeSelection	TireParameterFile
InflationPressureValue.Value	0.0 (millimeters part), 0.0 (inches part)
ModelTypeSelection	Cdt30
RimRoadGlobal	1
RimRoadTydexW	1
RimTydexCH	1
RoadGlobal	0
SolverResults	0
StaticHold	1
StaticRadius.Value	0.1 (millimeters part), 0 (inches part)
StaticVerticalStiffness.Value	0.0 (millimeters part), 0.0 (inches part)
TimeStatistics	0
WheelGlobal	0
WheelRoadRef	0

New in version NX11.0.0.

Properties¶

Property	Description
AmbientTempFunction	Returns or sets the ambient temperature function
AmbientTempProfile	Returns the Profile for Ambient Temperature.
AmbientTempTypeSelection	Returns or sets the ambient temperature type.
AmbientTempValue	Returns the ambient temperature constant value.
ContactKinematics	Returns or sets the Contact Kinematics (Effective Rolling Radius, Slip Velocities, Surface Normal).
ContactLengthWidth	Returns or sets the contact length/width.
ContactPointGlobal	Returns or sets the contact point surface friction global.
ContactPointRoadRef	Returns or sets the contact point surface friction road frame.
CorrectorIter	Returns the corrector iterations.
DisplayScale	Returns or sets the icon display scale
EnergyLoss	Returns or sets the wear indicator.
EnergyLossOfSpecificEntities	Returns or sets the Energy Loss Of Specific Entities.
EnergyLossPerSegment	Returns or sets the Energy Loss Per Cross Section Segment Activates specific CDTire results: eloss_gl, eloss_01 .
GroupName	Returns or sets the group name
GroupType	Returns or sets the group type
Inclination	Returns or sets the inclination and slip angle, slip loaded radius, rim rotation.
InflationPressureFunction	Returns or sets the inflation pressure function
InflationPressureProfile	Returns the Profile for Inflation Pressure.
InflationPressureTypeSelection	Returns or sets the inflation pressure type.
InflationPressureValue	Returns the inflation pressure constant value.
ModelTypeSelection	Returns or sets the CDTire model type.
Name	Returns or sets the name of the Tire Property
PrimaryParamFile	Returns or sets the primary parameter file.
RimRoadGlobal	Returns or sets the rim road global frame.
RimRoadTydexW	Returns or sets the rim road tydex-W frame.
RimTydexCH	Returns or sets the rim Tydex-C and Tydex-H frames.
RoadGlobal	Returns or sets the road center global.
SolverResults	Returns or sets the solver results Activates specific CDTire results: Integration step size (h);Time integration error (err);
StaticHold	Returns or sets the static hold.
StaticRadius	Returns the static radius.
StaticVerticalStiffness	Returns the static vertical stiffness.
Tag	Returns the Tag for this object.
TimeStatistics	Returns or sets the time statistics Activates specific CDTire results: Simulation time (time); CDTire tire model type (submodel); CDTire road model type (type); CPU time for this tire (cpu_time);
TireControlFile	Returns or sets the tire control file.
WearIndicatorPerSegment	Returns or sets the Wear Indicator Per Cross Section Segment.
WheelGlobal	Returns or sets the wheel center global.
WheelRoadRef	Returns or sets the wheel center road reference frame.

Methods¶

Method	Description
Commit	Commits any edits that have been applied to the builder.
Destroy	Deletes the builder, and cleans up any objects created by the builder.
GetCommittedObjects	For builders that create more than one object, this method returns the objects that are created by commit.
GetObject	Returns the object currently being edited by this builder.
ShowResults	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations¶

TirePropertyCdBuilderAmbientTempType Enumeration	The Ambient Temp type.
TirePropertyCdBuilderInflationPressureType Enumeration	The Inflation Pressure type.
TirePropertyCdBuilderModelType Enumeration	The Model type.

Property Detail¶

AmbientTempFunction¶

TirePropertyCdBuilder.AmbientTempFunction¶

Returns or sets the ambient temperature function

-------------------------------------

Getter Method

Signature AmbientTempFunction

Returns:
Return type:	`NXOpen.Motion.MotionFunction`

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AmbientTempFunction

Parameters:	ambientTempFunction (`NXOpen.Motion.MotionFunction`) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

AmbientTempProfile¶

TirePropertyCdBuilder.AmbientTempProfile¶

Returns the Profile for Ambient Temperature.

-------------------------------------

Getter Method

Signature AmbientTempProfile

Returns:
Return type:	`NXOpen.Motion.SelectFieldData`

New in version NX12.0.0.

License requirements: mechanisms (“MECHANISMS”)

AmbientTempTypeSelection¶

TirePropertyCdBuilder.AmbientTempTypeSelection¶

Returns or sets the ambient temperature type.

Specifies how the ambient temperature will be defined. If AmbientTempType.TireParameterFile is selected, then the ambient temperature is set in the selected tire parameter file. Otherwise, it will be defined as a constant, function, or a profile. The pressure curve defines ambient temperature as a function of simulation time.

-------------------------------------

Getter Method

Signature AmbientTempTypeSelection

Returns:
Return type:	`NXOpen.Motion.TirePropertyCdBuilderAmbientTempType`

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AmbientTempTypeSelection

Parameters:	ambientTempTypeSelection (`NXOpen.Motion.TirePropertyCdBuilderAmbientTempType`) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

AmbientTempValue¶

TirePropertyCdBuilder.AmbientTempValue¶

Returns the ambient temperature constant value.

-------------------------------------

Getter Method

Signature AmbientTempValue

Returns:
Return type:	`NXOpen.Expression`

New in version NX11.0.0.

License requirements: None.

ContactKinematics¶

TirePropertyCdBuilder.ContactKinematics¶

Returns or sets the Contact Kinematics (Effective Rolling Radius, Slip Velocities, Surface Normal).

Activates specific CDTire results: Effective rolling radius (eff_roll_rad);Loaded radius rate of change (radius_rate); Longitudinal slip velocity (long_slip_vel);Lateral slip velocity (lat_slip_vel); Surface normal in road frame (surf_norm_x, surf_norm_y, surf_norm_z); Longitudinal velocity (long_vel);Spin velocity (spin_vel);

-------------------------------------

Getter Method

Signature ContactKinematics

Returns:
Return type:	bool

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ContactKinematics

Parameters:	attributeValue (bool) –

New in version NX12.0.0.

License requirements: mechanisms (“MECHANISMS”)

ContactLengthWidth¶

TirePropertyCdBuilder.ContactLengthWidth¶

Returns or sets the contact length/width.

Activates specific CDTire results: Contact patch length (contlength); Contact patch width (contwidth);

-------------------------------------

Getter Method

Signature ContactLengthWidth

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ContactLengthWidth

Parameters:	contactLengthWidth (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

ContactPointGlobal¶

TirePropertyCdBuilder.ContactPointGlobal¶

Returns or sets the contact point surface friction global.

Activates specific CDTire results: Global location of contact center (contact_x_world, contact_y_world, contact_z_world); Coefficient of friction at contact point (mu);

-------------------------------------

Getter Method

Signature ContactPointGlobal

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ContactPointGlobal

Parameters:	contactPointGlobal (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

ContactPointRoadRef¶

TirePropertyCdBuilder.ContactPointRoadRef¶

Returns or sets the contact point surface friction road frame.

Activates specific CDTire results: x, y, or z-component of contact center position wrt Road Body (contact_x, contact_y, contact_z); Coefficient of friction at contact point (mu);

-------------------------------------

Getter Method

Signature ContactPointRoadRef

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ContactPointRoadRef

Parameters:	contactPointRoadRef (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

CorrectorIter¶

TirePropertyCdBuilder.CorrectorIter¶

Returns the corrector iterations.

Define the maximum number of corrector iterations to be performed at each simulation time step in the CDTire internal PECE integrator.

-------------------------------------

Getter Method

Signature CorrectorIter

Returns:
Return type:	`NXOpen.Expression`

New in version NX11.0.0.

License requirements: None.

EnergyLoss¶

TirePropertyCdBuilder.EnergyLoss¶

Returns or sets the wear indicator.

-------------------------------------

Getter Method

Signature EnergyLoss

Returns:
Return type:	bool

New in version NX11.0.0.

Deprecated since version NX12.0.0: Use TirePropertyCdBuilder.WearIndicatorPerSegment() instead.

License requirements: None.

-------------------------------------

Setter Method

Signature EnergyLoss

Parameters:	attributeValue (bool) –

New in version NX11.0.0.

Deprecated since version NX12.0.0: Use TirePropertyCdBuilder.WearIndicatorPerSegment() instead.

License requirements: mechanisms (“MECHANISMS”)

EnergyLossOfSpecificEntities¶

TirePropertyCdBuilder.EnergyLossOfSpecificEntities¶

Returns or sets the Energy Loss Of Specific Entities.

Activates specific CDTire results: (el_all, el_rubber_circ_damp, el_rubber_lat_damp, el_rubber_diag_damp, el_rubber_shear_damp, el_carcass_damp, el_capply_damp, el_belt_damp, el_bend_damp_x, el_bend_damp_y, el_bend_damp_xy, el_tread_slip, el_tread_radial_damp, el_tread_inner_frict);

-------------------------------------

Getter Method

Signature EnergyLossOfSpecificEntities

Returns:
Return type:	bool

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature EnergyLossOfSpecificEntities

Parameters:	attributeValue (bool) –

New in version NX12.0.0.

License requirements: mechanisms (“MECHANISMS”)

EnergyLossPerSegment¶

TirePropertyCdBuilder.EnergyLossPerSegment¶

Returns or sets the Energy Loss Per Cross Section Segment Activates specific CDTire results: eloss_gl, eloss_01 .

-------------------------------------

Getter Method

Signature EnergyLossPerSegment

Returns:
Return type:	bool

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature EnergyLossPerSegment

Parameters:	attributeValue (bool) –

New in version NX12.0.0.

License requirements: mechanisms (“MECHANISMS”)

Inclination¶

TirePropertyCdBuilder.Inclination¶

Returns or sets the inclination and slip angle, slip loaded radius, rim rotation.

Activates specific CDTire results: Deflected tire radius (dynrad); y-component of rotational rim velocity wrt Tire Body (wy); Inclination angle (gamma); Slip angle (alpha); Longitudinal slip (longslip);

-------------------------------------

Getter Method

Signature Inclination

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Inclination

Parameters:	inclination (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

InflationPressureFunction¶

TirePropertyCdBuilder.InflationPressureFunction¶

Returns or sets the inflation pressure function

-------------------------------------

Getter Method

Signature InflationPressureFunction

Returns:
Return type:	`NXOpen.Motion.MotionFunction`

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature InflationPressureFunction

Parameters:	inflationPressureFunction (`NXOpen.Motion.MotionFunction`) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

InflationPressureProfile¶

TirePropertyCdBuilder.InflationPressureProfile¶

Returns the Profile for Inflation Pressure.

-------------------------------------

Getter Method

Signature InflationPressureProfile

Returns:
Return type:	`NXOpen.Motion.SelectFieldData`

New in version NX12.0.0.

License requirements: mechanisms (“MECHANISMS”)

InflationPressureTypeSelection¶

TirePropertyCdBuilder.InflationPressureTypeSelection¶

Returns or sets the inflation pressure type.

Specifies how the tire pressure will be defined. If InflationPressureType.TireParameterFile is selected, then the tire pressure is set in the selected tire parameter file. Otherwise, it will be defined as a constant, function, or a profile. The pressure curve defines tire pressure as a function of simulation time.

-------------------------------------

Getter Method

Signature InflationPressureTypeSelection

Returns:
Return type:	`NXOpen.Motion.TirePropertyCdBuilderInflationPressureType`

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature InflationPressureTypeSelection

Parameters:	inflationPressureTypeSelection (`NXOpen.Motion.TirePropertyCdBuilderInflationPressureType`) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

InflationPressureValue¶

TirePropertyCdBuilder.InflationPressureValue¶

Returns the inflation pressure constant value.

-------------------------------------

Getter Method

Signature InflationPressureValue

Returns:
Return type:	`NXOpen.Expression`

New in version NX11.0.0.

License requirements: None.

ModelTypeSelection¶

TirePropertyCdBuilder.ModelTypeSelection¶

Returns or sets the CDTire model type.

-------------------------------------

Getter Method

Signature ModelTypeSelection

Returns:
Return type:	`NXOpen.Motion.TirePropertyCdBuilderModelType`

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ModelTypeSelection

Parameters:	modelTypeSelection (`NXOpen.Motion.TirePropertyCdBuilderModelType`) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

Name¶

TirePropertyCdBuilder.Name¶

Returns or sets the name of the Tire Property

-------------------------------------

Getter Method

Signature Name

Returns:
Return type:	str

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Name

Parameters:	name (str) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

PrimaryParamFile¶

TirePropertyCdBuilder.PrimaryParamFile¶

Returns or sets the primary parameter file.

The tire parameter file describes the properties of the tire. The number and location of the contained parameters depend on the used tire model. The file extension depends upon the selected Model Type.

-------------------------------------

Getter Method

Signature PrimaryParamFile

Returns:
Return type:	str

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PrimaryParamFile

Parameters:	filename (str) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

RimRoadGlobal¶

TirePropertyCdBuilder.RimRoadGlobal¶

Returns or sets the rim road global frame.

Activates specific CDTire results: Global x, y, or z-component of tire force/torque applied to Tire Body (tb_gl_fx, tb_gl_fy, tb_gl_fz, tb_gl_tx, tb_gl_ty, tb_gl_tz);

-------------------------------------

Getter Method

Signature RimRoadGlobal

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RimRoadGlobal

Parameters:	rimRoadGlobal (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

RimRoadTydexW¶

TirePropertyCdBuilder.RimRoadTydexW¶

Returns or sets the rim road tydex-W frame.

Activates specific CDTire results: X, y, or z-component of tire force/torque applied to Tire body, in Tydex-W frame (tb_tw_fx, tb_tw_fy, tb_tw_fz, tb_tw_tx, tb_tw_ty, tb_tw_tz); X, y, or z-component of contact force/torque applied to Road body, in Tydex-W frame (rb_tw_fx, rb_tw_fy, rb_tw_fz, rb_tw_tx, rb_tw_ty, rb_tw_tz);

-------------------------------------

Getter Method

Signature RimRoadTydexW

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RimRoadTydexW

Parameters:	rimRoadTydexW (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

RimTydexCH¶

TirePropertyCdBuilder.RimTydexCH¶

Returns or sets the rim Tydex-C and Tydex-H frames.

Activates specific CDTire results: x, y, or z-component of tire force applied to Tire Body wrt Tydex-C coordinate system (tb_tc_fx, tb_tc_fy, tb_tc_fz, tb_tc_tx, tb_tc_ty, tb_tc_tz); x, y, or z-component of tire force applied to Tire Body wrt Tydex-H coordinate system (tb_th_fx, tb_th_fy, tb_th_fz, tb_th_tx, tb_th_ty, tb_th_tz);.

-------------------------------------

Getter Method

Signature RimTydexCH

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RimTydexCH

Parameters:	rimTydexCH (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

RoadGlobal¶

TirePropertyCdBuilder.RoadGlobal¶

Returns or sets the road center global.

Activates specific CDTire results: Vector from road axis system to rim center, in road axis system coordinates (roadx_world, roady_world, roadz_world); Euler parameter orientation coordinates of rim axis system with respect to road axis system (roade0_world, roade1_world, roade2_world, roade3_world); Velocity of rim center, relative to road axis system, in road axis system coordinates (roadxd_world, roadyd_world, roadzd_world); Angular velocity of rim relative to road axis system, in road axis system coordinates (roadwx_world, roadwy_world, roadwz_world);

-------------------------------------

Getter Method

Signature RoadGlobal

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature RoadGlobal

Parameters:	roadGlobal (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

SolverResults¶

TirePropertyCdBuilder.SolverResults¶

Returns or sets the solver results Activates specific CDTire results: Integration step size (h);Time integration error (err);

-------------------------------------

Getter Method

Signature SolverResults

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SolverResults

Parameters:	solverResults (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

StaticHold¶

TirePropertyCdBuilder.StaticHold¶

Returns or sets the static hold.

Enables or disables holding forces during static analysis. These holding forces are applied to prevent add tire spin and gross chassis motion (X and Y translation and yaw with respect to the road “up” vector) stiffness in order to improve convergence during static analysis.

-------------------------------------

Getter Method

Signature StaticHold

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature StaticHold

Parameters:	staticHold (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

StaticRadius¶

TirePropertyCdBuilder.StaticRadius¶

Returns the static radius.

Approximate radius of the tire. Used only for the purpose of including additional stabilizing forces during static analysis if TirePropertyCdBuilder.StaticHold`() is true.

-------------------------------------

Getter Method

Signature StaticRadius

Returns:
Return type:	`NXOpen.Expression`

New in version NX11.0.0.

License requirements: None.

StaticVerticalStiffness¶

TirePropertyCdBuilder.StaticVerticalStiffness¶

Returns the static vertical stiffness.

Specifies the vertical stiffness only used in static equilibrating force calculations. Used only for the purpose of including additional stabilizing forces during static analysis if TirePropertyCdBuilder.StaticHold`() is true.

-------------------------------------

Getter Method

Signature StaticVerticalStiffness

Returns:
Return type:	`NXOpen.Expression`

New in version NX11.0.0.

License requirements: None.

TimeStatistics¶

TirePropertyCdBuilder.TimeStatistics¶

Returns or sets the time statistics Activates specific CDTire results: Simulation time (time); CDTire tire model type (submodel); CDTire road model type (type); CPU time for this tire (cpu_time);

-------------------------------------

Getter Method

Signature TimeStatistics

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TimeStatistics

Parameters:	timeStatistics (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

TireControlFile¶

TirePropertyCdBuilder.TireControlFile¶

Returns or sets the tire control file.

The Tire Control File contains integrator control, adaptivity control and monitor control parameter.

-------------------------------------

Getter Method

Signature TireControlFile

Returns:
Return type:	str

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature TireControlFile

Parameters:	filename (str) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

WearIndicatorPerSegment¶

TirePropertyCdBuilder.WearIndicatorPerSegment¶

Returns or sets the Wear Indicator Per Cross Section Segment.

Activates specific CDTire results: (wear_ind_gl, wear_ind_01 … wear_ind_29);

-------------------------------------

Getter Method

Signature WearIndicatorPerSegment

Returns:
Return type:	bool

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature WearIndicatorPerSegment

Parameters:	attributeValue (bool) –

New in version NX12.0.0.

License requirements: mechanisms (“MECHANISMS”)

WheelGlobal¶

TirePropertyCdBuilder.WheelGlobal¶

Returns or sets the wheel center global.

Activates specific CDTire results: Global position of rim center (wheelx_world, wheely_world, wheelz_world); Euler parameters orientation coordinates of rim center axis system with respect to world (wheele0_world, wheele1_world, wheele2_world, wheele4_world); Global velocity of rim center (wheelxd_world, wheelyd_world, wheelzd_world); Global angular velocity of rim center (wheelwx_world, wheelwy_world, wheelwz_world);.

-------------------------------------

Getter Method

Signature WheelGlobal

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature WheelGlobal

Parameters:	wheelGlobal (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

WheelRoadRef¶

TirePropertyCdBuilder.WheelRoadRef¶

Returns or sets the wheel center road reference frame.

Activates specific CDTire results: Vector from road axis system to rim center, in road axis system coordinates (wheelx_road, wheely_road, wheelz_road); Euler parameter orientation coordinates of rim axis system with respect to road axis system (wheele0_road, wheele1_road, wheele2_road, wheele3_road); Velocity of rim center, relative to road axis system, in road axis system coordinates (wheelxd_road, wheelyd_road, wheelzd_road); Angular velocity of rim relative to road axis system, in road axis system coordinates (wheelwx_road, wheelwy_road, wheelwz_road);

-------------------------------------

Getter Method

Signature WheelRoadRef

Returns:
Return type:	bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature WheelRoadRef

Parameters:	wheelRoadRef (bool) –

New in version NX11.0.0.

License requirements: mechanisms (“MECHANISMS”)

Method Detail¶

Validate¶

TirePropertyCdBuilder.Validate¶

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:	Was self validation successful
Return type:	bool

New in version NX3.0.1.

License requirements: None.