PartSheetmetal Class¶

class NXOpen.Preferences.PartSheetmetal¶

Bases: object

Represents the NX Sheetmetal preferences applicable to part

Preferences are in control of the part. They can not be created but can only be changed.

New in version NX4.0.0.

Methods¶

Method	Description
Commit	Commits and applies all the settings done with set_callout_type_display and set_object_type_display.
GetBendAllowanceFormula	RETURNS the bend allowance formula
GetBendDeductionFormula	Returns the bend deduction formula
GetBendDefinitionMethodOption	RETURNS the bend definition method
GetBendRadius	RETURNS the bend radius expression
GetBendReliefDepth	RETURNS the bend relief depth
GetBendReliefWidth	RETURNS the bend relief width
GetBendTable	RETURNS the bend table name
GetDepthThreshold	RETURNS the depth threshold
GetDeviationalToleranceInFlatSolid	RETURNS the deviational tolerance during Flat Solid simplification
GetDistanceThreshold	RETURNS the distance threshold
GetFlatPatternAllCalloutTypeDisplay	Returns the dialog names, identifiers, and enabled status for all the available callout types.
GetFlatPatternAllObjectTypeDisplay	Returns the types, colors, fonts, widths, and enabled status for all the the available object types.
GetFlatPatternCalloutOrientationType	Returns the orientation type for flat pattern callouts.
GetFlatPatternCalloutTypeContents	Returns the contents for a callout type.
GetFlatPatternCalloutTypeDisplay	Returns the display data for a callout type.
GetFlatPatternObjectTypeDisplay	Returns the display data for a flat pattern object type.
GetFlexibleCableBottomFaceColor	RETURNS the bottom face color.
GetFlexibleCableTopFaceColor	RETURNS the top face color.
GetHoleTreatmentDiameter	RETURNS the hole treatment diameter value in Flat Pattern operation
GetHoleTreatmentType	RETURNS the hole treatment type in Flat Pattern operation
GetInnerCornerTreatmentType	RETURNS the inner corner treatment type in Flat as Solid operation
GetInnerCornerTreatmentValue	RETURNS the inner corner treatment value for Flat as Solid operations
GetIsBsplineSimplifiedInFlatSolid	RETURNS the flag indicating whether B-Splines are simplified as part of the Flat Solid creation
GetIsSystemGeneratedBendReliefRemovedInFlatSolid	RETURNS the flag indicating whether or not system generated bend releifs are removed as part of the Flat Solid creation
GetMaintainCircularShapeForHolesInFlatSolid	Returns the flag indicating whether or not maintain circular shape for holes as part of the Flat Solid creation
GetMaterial	RETURNS the material name saved with the part
GetMaterialNames	RETURNS the material names defined in the material standards table
GetMaterialProperties	RETURNS the material name saved with the part
GetMinimumArcToleranceInFlatSolid	RETURNS the minimum arc tolerance during Flat Solid simplification
GetMinimumToolClearance	Returns the minimum tool clearance expression
GetMinimumWebLength	Returns the minimum Web Length expression
GetNeutralFactor	RETURNS the neutral factor
GetOffsetRadius	RETURNS the offset radius
GetOuterCornerTreatmentType	RETURNS the outer corner treatment type in Flat as Solid operation
GetOuterCornerTreatmentValue	RETURNS the out corner treatment value for Flat as Solid operations
GetSecondaryToolName	Returns the secondaryToolName refered from Material Table
GetStationaryRadius	RETURNS the stationary radius
GetTabCurveTypeDisplayData	Returns the display data for a given tab curve type.
GetThickness	RETURNS the thickness expression
GetTool	Returns the tool name saved with the part
GetToolNames	Returns the tool names defined in the material standards table
GetToolProperties	Returns the tool properties saved with the part
SetBendAllowanceFormula	SETS the bend allowance formula
SetBendDeductionFormula
SetBendDefinitionMethodOption	SETS the bend definition method
SetBendRadius	The bend radius value
SetBendReliefDepth	THE bend relief depth value
SetBendReliefWidth	THE bend relief depth value
SetBendTable	SETS the bend table name
SetDepthThreshold	THE depth threshold
SetDeviationalToleranceInFlatSolid	SETS the deviational tolerance during Flat Solid simplification
SetDistanceThreshold	THE distance threshold
SetFlatPatternCalloutOrientationType	Sets the orientation type for flat pattern callouts.
SetFlatPatternCalloutTypeContents	Sets the contents for a callout type.
SetFlatPatternCalloutTypeDisplay	Sets the display data for a callout type.
SetFlatPatternObjectTypeDisplay	Sets the display data for a flat pattern object type.
SetFlexibleCableBottomFaceColor	THE bottom face color.
SetFlexibleCableTopFaceColor	THE top face color.
SetHoleTreatmentDiameter	SETS the hole treatment diameter value in Flat Pattern operation
SetHoleTreatmentType	SETS the hole treatment type in Flat Pattern operation
SetInnerCornerTreatmentType	SETS the inner corner treatment type in Flat as Solid operation
SetInnerCornerTreatmentValue	SETS the inner corner treatment value for Flat as Solid operations
SetIsBsplineSimplifiedInFlatSolid	SETS the flag indicating whether or not B-Splines are simplified as part of the Flat Solid creation
SetIsSystemGeneratedBendReliefRemovedInFlatSolid	SETS the flag indicating whether or not system generated bend releifs are removed as part of the Flat Solid creation
SetMaintainCircularShapeForHolesInFlatSolid	Sets the flag indicating whether or not maintain circular shape for holes as part of the Flat Solid creation
SetMaterial	The material standard
SetMinimumArcToleranceInFlatSolid	SETS the minimum arc tolerance during Flat Solid simplification
SetMinimumToolClearance	Sets minimum tool clearance expression
SetMinimumWebLength	Sets minimum Web Length expression
SetNeutralFactor	THE bend relief depth value
SetOffsetRadius	THE offset radius
SetOuterCornerTreatmentType	SETS the outer corner treatment type in Flat as Solid operation
SetOuterCornerTreatmentValue	THE outer corner treatment value for Flat as Solid operations
SetSecondaryToolName
SetStationaryRadius	THE stationary radius
SetTabCurveTypeDisplayData	Sets the display data for a given tab curve type.
SetThickness	THE thickness value string
SetTool	The tool standard

Enumerations¶

PartSheetmetalBendDefinitionMethodOptions Enumeration	This enum represents the bend definition method options in preferences.
PartSheetmetalFlatPatternCalloutOrientationType Enumeration	This enum represents orientation types for the flat pattern callouts
PartSheetmetalFlatPatternObjectType Enumeration	The members of the following enumerated type are used to identify object types to the FlatPattern API.
PartSheetmetalTabCurveType Enumeration	The following members are used to identify curve types of base tab feature.

Structs¶

PartSheetmetalFlatPatternCalloutTypeDisplay_Struct Struct	The members of the following structure are the display data for a callout in a flat pattern drawing member view.
PartSheetmetalFlatPatternObjectTypeDisplay_Struct Struct	The members of the following structure are the display data for an object in a flat pattern drawing member view.
PartSheetmetalTabCurveTypeDisplayData_Struct Struct	The members of the following structure are the display data of a tab curve type

Method Detail¶

Commit¶

PartSheetmetal.Commit¶

Commits and applies all the settings done with set_callout_type_display and set_object_type_display.

It must be called after a sequence of calls to those methods to cause the view to update.

Signature Commit()

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetBendAllowanceFormula¶

PartSheetmetal.GetBendAllowanceFormula¶

RETURNS the bend allowance formula

Signature GetBendAllowanceFormula()

Returns:	bend allowance formula
Return type:	str

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetBendDeductionFormula¶

PartSheetmetal.GetBendDeductionFormula¶

Returns the bend deduction formula

Signature GetBendDeductionFormula()

Returns:	bend deduction formula
Return type:	str

New in version NX12.0.0.

License requirements: None.

GetBendDefinitionMethodOption¶

PartSheetmetal.GetBendDefinitionMethodOption¶

RETURNS the bend definition method

Signature GetBendDefinitionMethodOption()

Returns:	bend definition method option
Return type:	`NXOpen.Preferences.PartSheetmetalBendDefinitionMethodOptions`

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetBendRadius¶

PartSheetmetal.GetBendRadius¶

RETURNS the bend radius expression

Signature GetBendRadius()

Returns:	expression object for radius of bend faces
Return type:	`NXOpen.Expression`

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetBendReliefDepth¶

PartSheetmetal.GetBendReliefDepth¶

RETURNS the bend relief depth

Signature GetBendReliefDepth()

Returns:	expression object for depth of bend relief
Return type:	`NXOpen.Expression`

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetBendReliefWidth¶

PartSheetmetal.GetBendReliefWidth¶

RETURNS the bend relief width

Signature GetBendReliefWidth()

Returns:	expression object for width of bend relief
Return type:	`NXOpen.Expression`

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetBendTable¶

PartSheetmetal.GetBendTable¶

RETURNS the bend table name

Signature GetBendTable()

Returns:	bend table name
Return type:	str

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetDepthThreshold¶

PartSheetmetal.GetDepthThreshold¶

RETURNS the depth threshold

Signature GetDepthThreshold()

Returns:	expression object for depth threshold of joggle
Return type:	`NXOpen.Expression`

New in version NX11.0.0.

License requirements: adv_sheet_metal_dsgn (“ADVANCED SHEET METAL DESIGN”)

GetDeviationalToleranceInFlatSolid¶

PartSheetmetal.GetDeviationalToleranceInFlatSolid¶

RETURNS the deviational tolerance during Flat Solid simplification

Signature GetDeviationalToleranceInFlatSolid()

Returns:	flag
Return type:	float

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetDistanceThreshold¶

PartSheetmetal.GetDistanceThreshold¶

RETURNS the distance threshold

Signature GetDistanceThreshold()

Returns:	expression object for distance threshold of joggle
Return type:	`NXOpen.Expression`

New in version NX11.0.0.

License requirements: adv_sheet_metal_dsgn (“ADVANCED SHEET METAL DESIGN”)

GetFlatPatternAllCalloutTypeDisplay¶

PartSheetmetal.GetFlatPatternAllCalloutTypeDisplay¶

Returns the dialog names, identifiers, and enabled status for all the available callout types.

Signature GetFlatPatternAllCalloutTypeDisplay()

Returns:	Array of structures with the callout type display data.
Return type:	list of `NXOpen.Preferences.PartSheetmetalFlatPatternCalloutTypeDisplay_Struct`

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetFlatPatternAllObjectTypeDisplay¶

PartSheetmetal.GetFlatPatternAllObjectTypeDisplay¶

Returns the types, colors, fonts, widths, and enabled status for all the the available object types.

Signature GetFlatPatternAllObjectTypeDisplay()

Returns:	Array of structures with the object type display data.
Return type:	list of `NXOpen.Preferences.PartSheetmetalFlatPatternObjectTypeDisplay_Struct`

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetFlatPatternCalloutOrientationType¶

PartSheetmetal.GetFlatPatternCalloutOrientationType¶

Returns the orientation type for flat pattern callouts.

Signature GetFlatPatternCalloutOrientationType()

Returns:	The orientation type for the flat pattern callouts.
Return type:	`NXOpen.Preferences.PartSheetmetalFlatPatternCalloutOrientationType`

New in version NX9.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetFlatPatternCalloutTypeContents¶

PartSheetmetal.GetFlatPatternCalloutTypeContents¶

Returns the contents for a callout type.

Signature GetFlatPatternCalloutTypeContents(calloutType)

Parameters:	calloutType (str) – The name of the callout type for which to get the content.
Returns:	The contents for the callout type.
Return type:	list of str

New in version NX9.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetFlatPatternCalloutTypeDisplay¶

PartSheetmetal.GetFlatPatternCalloutTypeDisplay¶

Returns the display data for a callout type.

The name member of the NXOpen.Preferences.PartFlexiblePrintedCircuitDesignFlatPatternCalloutTypeDisplay_Struct is separately allocated from the callout_type argument string. In some cases the new string will contain an extended form of the callout_type passed in, and that form should be used for subsequent JA calls, without modification.

Signature GetFlatPatternCalloutTypeDisplay(calloutType)

Parameters:	calloutType (str) – The name of the callout type for which to get the display data.
Returns:	The display data for the callout type.
Return type:	`NXOpen.Preferences.PartSheetmetalFlatPatternCalloutTypeDisplay_Struct`

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetFlatPatternObjectTypeDisplay¶

PartSheetmetal.GetFlatPatternObjectTypeDisplay¶

Returns the display data for a flat pattern object type.

Signature GetFlatPatternObjectTypeDisplay(objectType)

Parameters:	objectType (`NXOpen.Preferences.PartSheetmetalFlatPatternObjectType`) – The object type for which to return the display data.
Returns:	The display data for the flat pattern object type.
Return type:	`NXOpen.Preferences.PartSheetmetalFlatPatternObjectTypeDisplay_Struct`

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetFlexibleCableBottomFaceColor¶

PartSheetmetal.GetFlexibleCableBottomFaceColor¶

RETURNS the bottom face color.

Signature GetFlexibleCableBottomFaceColor()

Returns:
Return type:	Id

New in version NX7.5.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetFlexibleCableTopFaceColor¶

PartSheetmetal.GetFlexibleCableTopFaceColor¶

RETURNS the top face color.

Signature GetFlexibleCableTopFaceColor()

Returns:
Return type:	Id

New in version NX7.5.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetHoleTreatmentDiameter¶

PartSheetmetal.GetHoleTreatmentDiameter¶

RETURNS the hole treatment diameter value in Flat Pattern operation

Signature GetHoleTreatmentDiameter()

Returns:	expression object for hole diameter value
Return type:	`NXOpen.Expression`

New in version NX12.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetHoleTreatmentType¶

PartSheetmetal.GetHoleTreatmentType¶

RETURNS the hole treatment type in Flat Pattern operation

Signature GetHoleTreatmentType()

Returns:	hole treatment type
Return type:	`NXOpen.Features.SheetMetal.FeatureProperty`

New in version NX12.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetInnerCornerTreatmentType¶

PartSheetmetal.GetInnerCornerTreatmentType¶

RETURNS the inner corner treatment type in Flat as Solid operation

Signature GetInnerCornerTreatmentType()

Returns:	outer corner treatment type
Return type:	`NXOpen.Features.SheetMetal.FeatureProperty`

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetInnerCornerTreatmentValue¶

PartSheetmetal.GetInnerCornerTreatmentValue¶

RETURNS the inner corner treatment value for Flat as Solid operations

Signature GetInnerCornerTreatmentValue()

Returns:	expression object for inner corner treatment value
Return type:	`NXOpen.Expression`

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetIsBsplineSimplifiedInFlatSolid¶

PartSheetmetal.GetIsBsplineSimplifiedInFlatSolid¶

RETURNS the flag indicating whether B-Splines are simplified as part of the Flat Solid creation

Signature GetIsBsplineSimplifiedInFlatSolid()

Returns:	flag
Return type:	bool

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetIsSystemGeneratedBendReliefRemovedInFlatSolid¶

PartSheetmetal.GetIsSystemGeneratedBendReliefRemovedInFlatSolid¶

RETURNS the flag indicating whether or not system generated bend releifs are removed as part of the Flat Solid creation

Signature GetIsSystemGeneratedBendReliefRemovedInFlatSolid()

Returns:	flag
Return type:	bool

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetMaintainCircularShapeForHolesInFlatSolid¶

PartSheetmetal.GetMaintainCircularShapeForHolesInFlatSolid¶

Returns the flag indicating whether or not maintain circular shape for holes as part of the Flat Solid creation

Signature GetMaintainCircularShapeForHolesInFlatSolid()

Returns:	flag
Return type:	bool

New in version NX6.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetMaterial¶

PartSheetmetal.GetMaterial¶

RETURNS the material name saved with the part

Signature GetMaterial()

Returns:	The name of the material saved with the part
Return type:	str

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetMaterialNames¶

PartSheetmetal.GetMaterialNames¶

RETURNS the material names defined in the material standards table

Signature GetMaterialNames()

Returns:
Return type:	list of str

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetMaterialProperties¶

PartSheetmetal.GetMaterialProperties¶

RETURNS the material name saved with the part

Signature GetMaterialProperties(materialName)

Parameters:	materialName (str) – material Name
Returns:	a tuple
Return type:	A tuple consisting of (propertyValues, propertyNames) propertyValues is a list of str. property Values propertyNames is a list of str. property Names

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetMinimumArcToleranceInFlatSolid¶

PartSheetmetal.GetMinimumArcToleranceInFlatSolid¶

RETURNS the minimum arc tolerance during Flat Solid simplification

Signature GetMinimumArcToleranceInFlatSolid()

Returns:	flag
Return type:	float

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetMinimumToolClearance¶

PartSheetmetal.GetMinimumToolClearance¶

Returns the minimum tool clearance expression

Signature GetMinimumToolClearance()

Returns:	expression object for punch tool clearance
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetMinimumWebLength¶

PartSheetmetal.GetMinimumWebLength¶

Returns the minimum Web Length expression

Signature GetMinimumWebLength()

Returns:	expression object for Web Length
Return type:	`NXOpen.Expression`

New in version NX6.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetNeutralFactor¶

PartSheetmetal.GetNeutralFactor¶

RETURNS the neutral factor

Signature GetNeutralFactor()

Returns:	expression object for neutral factor of bend areas
Return type:	`NXOpen.Expression`

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetOffsetRadius¶

PartSheetmetal.GetOffsetRadius¶

RETURNS the offset radius

Signature GetOffsetRadius()

Returns:	expression object for offset radius of joggle
Return type:	`NXOpen.Expression`

New in version NX11.0.0.

License requirements: adv_sheet_metal_dsgn (“ADVANCED SHEET METAL DESIGN”)

GetOuterCornerTreatmentType¶

PartSheetmetal.GetOuterCornerTreatmentType¶

RETURNS the outer corner treatment type in Flat as Solid operation

Signature GetOuterCornerTreatmentType()

Returns:	outer corner treatment type
Return type:	`NXOpen.Features.SheetMetal.FeatureProperty`

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetOuterCornerTreatmentValue¶

PartSheetmetal.GetOuterCornerTreatmentValue¶

RETURNS the out corner treatment value for Flat as Solid operations

Signature GetOuterCornerTreatmentValue()

Returns:	expression object for out corner treatment value
Return type:	`NXOpen.Expression`

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetSecondaryToolName¶

PartSheetmetal.GetSecondaryToolName¶

Returns the secondaryToolName refered from Material Table

Signature GetSecondaryToolName()

Returns:	secondaryToolName
Return type:	str

New in version NX12.0.0.

License requirements: None.

GetStationaryRadius¶

PartSheetmetal.GetStationaryRadius¶

RETURNS the stationary radius

Signature GetStationaryRadius()

Returns:	expression object for stationary radius of joggle
Return type:	`NXOpen.Expression`

New in version NX11.0.0.

License requirements: adv_sheet_metal_dsgn (“ADVANCED SHEET METAL DESIGN”)

GetTabCurveTypeDisplayData¶

PartSheetmetal.GetTabCurveTypeDisplayData¶

Returns the display data for a given tab curve type.

Signature GetTabCurveTypeDisplayData(curveType)

Parameters:	curveType (`NXOpen.Preferences.PartSheetmetalTabCurveType`) – The curve type for which to return the display data.
Returns:	The display data for the tab curves object type.
Return type:	`NXOpen.Preferences.PartSheetmetalTabCurveTypeDisplayData_Struct`

New in version NX12.0.0.

License requirements: None.

GetThickness¶

PartSheetmetal.GetThickness¶

RETURNS the thickness expression

Signature GetThickness()

Returns:	expression object for sheet thickness
Return type:	`NXOpen.Expression`

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetTool¶

PartSheetmetal.GetTool¶

Returns the tool name saved with the part

Signature GetTool()

Returns:	The name of the tool saved with the part
Return type:	str

New in version NX6.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetToolNames¶

PartSheetmetal.GetToolNames¶

Returns the tool names defined in the material standards table

Signature GetToolNames()

Returns:
Return type:	list of str

New in version NX6.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

GetToolProperties¶

PartSheetmetal.GetToolProperties¶

Returns the tool properties saved with the part

Signature GetToolProperties(toolName)

Parameters:	toolName (str) – tool Name
Returns:	a tuple
Return type:	A tuple consisting of (propertyValues, propertyNames) propertyValues is a list of str. property Values propertyNames is a list of str. property Names

New in version NX6.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetBendAllowanceFormula¶

PartSheetmetal.SetBendAllowanceFormula¶

SETS the bend allowance formula

Signature SetBendAllowanceFormula(updateModel, bendAllowanceFormula)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately bendAllowanceFormula (str) – bend allowance formula

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetBendDeductionFormula¶

PartSheetmetal.SetBendDeductionFormula¶

Signature SetBendDeductionFormula(updateModel, bendDeductionFormula)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately bendDeductionFormula (str) – bend deduction formula

New in version NX12.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetBendDefinitionMethodOption¶

PartSheetmetal.SetBendDefinitionMethodOption¶

SETS the bend definition method

Signature SetBendDefinitionMethodOption(updateModel, bendDefinitionMethod)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately bendDefinitionMethod (`NXOpen.Preferences.PartSheetmetalBendDefinitionMethodOptions`) – bend definition method option

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetBendRadius¶

PartSheetmetal.SetBendRadius¶

The bend radius value

Signature SetBendRadius(updateModel, bendRadius)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately bendRadius (str) – default bend radius value for bend faces

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetBendReliefDepth¶

PartSheetmetal.SetBendReliefDepth¶

THE bend relief depth value

Signature SetBendReliefDepth(updateModel, bendReliefDepth)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately bendReliefDepth (str) – default depth value for bend relief

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetBendReliefWidth¶

PartSheetmetal.SetBendReliefWidth¶

THE bend relief depth value

Signature SetBendReliefWidth(updateModel, bendReliefWidth)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately bendReliefWidth (str) – default width value for bend relief

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetBendTable¶

PartSheetmetal.SetBendTable¶

SETS the bend table name

Signature SetBendTable(updateModel, bendTable)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately bendTable (str) – bend table name

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetDepthThreshold¶

PartSheetmetal.SetDepthThreshold¶

THE depth threshold

Signature SetDepthThreshold(updateModel, depthThreshold)

Parameters:	updateModel (bool) – Specifies whether the solid model be updated immediately depthThreshold (str) – default depth threshold for joggle

New in version NX11.0.0.

License requirements: adv_sheet_metal_dsgn (“ADVANCED SHEET METAL DESIGN”)

SetDeviationalToleranceInFlatSolid¶

PartSheetmetal.SetDeviationalToleranceInFlatSolid¶

SETS the deviational tolerance during Flat Solid simplification

Signature SetDeviationalToleranceInFlatSolid(updateModel, deviationalToleranceInFlatSolid)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately deviationalToleranceInFlatSolid (float) – flag

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetDistanceThreshold¶

PartSheetmetal.SetDistanceThreshold¶

THE distance threshold

Signature SetDistanceThreshold(updateModel, distanceThreshold)

Parameters:	updateModel (bool) – Specifies whether the solid model be updated immediately distanceThreshold (str) – default distance threshold for joggle

New in version NX11.0.0.

License requirements: adv_sheet_metal_dsgn (“ADVANCED SHEET METAL DESIGN”)

SetFlatPatternCalloutOrientationType¶

PartSheetmetal.SetFlatPatternCalloutOrientationType¶

Sets the orientation type for flat pattern callouts.

Signature SetFlatPatternCalloutOrientationType(orientation)

Parameters:	orientation (`NXOpen.Preferences.PartSheetmetalFlatPatternCalloutOrientationType`) – The orientation type for the flat pattern callouts.

New in version NX9.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetFlatPatternCalloutTypeContents¶

PartSheetmetal.SetFlatPatternCalloutTypeContents¶

Sets the contents for a callout type.

Signature SetFlatPatternCalloutTypeContents(calloutType, contents)

Parameters:	calloutType (str) – The name of the callout type for which to set the content. contents (list of str) – The contents for the callout type.

New in version NX9.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetFlatPatternCalloutTypeDisplay¶

PartSheetmetal.SetFlatPatternCalloutTypeDisplay¶

Sets the display data for a callout type.

Signature SetFlatPatternCalloutTypeDisplay(calloutType, displayData)

Parameters:	calloutType (str) – The name of the callout type for which to set the display data. displayData (`NXOpen.Preferences.PartSheetmetalFlatPatternCalloutTypeDisplay_Struct`) – The display data for the callout type.

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetFlatPatternObjectTypeDisplay¶

PartSheetmetal.SetFlatPatternObjectTypeDisplay¶

Sets the display data for a flat pattern object type.

Signature SetFlatPatternObjectTypeDisplay(updateModel, objectType, displayData)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately. objectType (`NXOpen.Preferences.PartSheetmetalFlatPatternObjectType`) – The object type for which to get the display data. displayData (`NXOpen.Preferences.PartSheetmetalFlatPatternObjectTypeDisplay_Struct`) – The display data for the flat pattern object type.

New in version NX5.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetFlexibleCableBottomFaceColor¶

PartSheetmetal.SetFlexibleCableBottomFaceColor¶

THE bottom face color.

Signature SetFlexibleCableBottomFaceColor(bottomFaceColor)

Parameters:	bottomFaceColor (Id) –

New in version NX7.5.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetFlexibleCableTopFaceColor¶

PartSheetmetal.SetFlexibleCableTopFaceColor¶

THE top face color.

Signature SetFlexibleCableTopFaceColor(topFaceColor)

Parameters:	topFaceColor (Id) –

New in version NX7.5.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetHoleTreatmentDiameter¶

PartSheetmetal.SetHoleTreatmentDiameter¶

SETS the hole treatment diameter value in Flat Pattern operation

Signature SetHoleTreatmentDiameter(updateModel, diameter)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately diameter (str) – default value for hole diameter

New in version NX12.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetHoleTreatmentType¶

PartSheetmetal.SetHoleTreatmentType¶

SETS the hole treatment type in Flat Pattern operation

Signature SetHoleTreatmentType(updateModel, holeTreatmentType)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately holeTreatmentType (`NXOpen.Features.SheetMetal.FeatureProperty`) – hole treatment type

New in version NX12.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetInnerCornerTreatmentType¶

PartSheetmetal.SetInnerCornerTreatmentType¶

SETS the inner corner treatment type in Flat as Solid operation

Signature SetInnerCornerTreatmentType(updateModel, innerCornerTreatmentType)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately innerCornerTreatmentType (`NXOpen.Features.SheetMetal.FeatureProperty`) – outer corner treatment type

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetInnerCornerTreatmentValue¶

PartSheetmetal.SetInnerCornerTreatmentValue¶

SETS the inner corner treatment value for Flat as Solid operations

Signature SetInnerCornerTreatmentValue(updateModel, innerCornerTreatment)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately innerCornerTreatment (str) – default value for inner corner treatment

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetIsBsplineSimplifiedInFlatSolid¶

PartSheetmetal.SetIsBsplineSimplifiedInFlatSolid¶

SETS the flag indicating whether or not B-Splines are simplified as part of the Flat Solid creation

Signature SetIsBsplineSimplifiedInFlatSolid(updateModel, isBsplineSimplifiedInFlatSolid)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately isBsplineSimplifiedInFlatSolid (bool) – flag

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetIsSystemGeneratedBendReliefRemovedInFlatSolid¶

PartSheetmetal.SetIsSystemGeneratedBendReliefRemovedInFlatSolid¶

SETS the flag indicating whether or not system generated bend releifs are removed as part of the Flat Solid creation

Signature SetIsSystemGeneratedBendReliefRemovedInFlatSolid(updateModel, isSystemGeneratedBendReliefRemoved)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately isSystemGeneratedBendReliefRemoved (bool) – flag

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetMaintainCircularShapeForHolesInFlatSolid¶

PartSheetmetal.SetMaintainCircularShapeForHolesInFlatSolid¶

Sets the flag indicating whether or not maintain circular shape for holes as part of the Flat Solid creation

Signature SetMaintainCircularShapeForHolesInFlatSolid(updateModel, isMaintainCircularShapeForHoles)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately isMaintainCircularShapeForHoles (bool) – flag

New in version NX6.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetMaterial¶

PartSheetmetal.SetMaterial¶

The material standard

Signature SetMaterial(updateModel, standardName)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately standardName (str) – The name of a material from the material standards file

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetMinimumArcToleranceInFlatSolid¶

PartSheetmetal.SetMinimumArcToleranceInFlatSolid¶

SETS the minimum arc tolerance during Flat Solid simplification

Signature SetMinimumArcToleranceInFlatSolid(updateModel, minimumArcToleranceInFlatSolid)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately minimumArcToleranceInFlatSolid (float) – flag

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetMinimumToolClearance¶

PartSheetmetal.SetMinimumToolClearance¶

Sets minimum tool clearance expression

Signature SetMinimumToolClearance(updateModel, minToolClearance)

Parameters:	updateModel (bool) – Specifies whether the model be updated immediately minToolClearance (str) – minimum tool clearance value for NX Sheetmetal model

New in version NX6.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetMinimumWebLength¶

PartSheetmetal.SetMinimumWebLength¶

Sets minimum Web Length expression

Signature SetMinimumWebLength(updateModel, minWebLength)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately minWebLength (str) – minimum Web Length value for NX Sheetmetal model

New in version NX6.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetNeutralFactor¶

PartSheetmetal.SetNeutralFactor¶

THE bend relief depth value

Signature SetNeutralFactor(updateModel, neutralFactor)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately neutralFactor (str) – default neutral factor value for bend relief

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetOffsetRadius¶

PartSheetmetal.SetOffsetRadius¶

THE offset radius

Signature SetOffsetRadius(updateModel, offsetRadius)

Parameters:	updateModel (bool) – Specifies whether the solid model be updated immediately offsetRadius (str) – default offset radius for joggle

New in version NX11.0.0.

License requirements: adv_sheet_metal_dsgn (“ADVANCED SHEET METAL DESIGN”)

SetOuterCornerTreatmentType¶

PartSheetmetal.SetOuterCornerTreatmentType¶

SETS the outer corner treatment type in Flat as Solid operation

Signature SetOuterCornerTreatmentType(updateModel, outerCornerTreatmentType)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately outerCornerTreatmentType (`NXOpen.Features.SheetMetal.FeatureProperty`) – outer corner treatment type

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetOuterCornerTreatmentValue¶

PartSheetmetal.SetOuterCornerTreatmentValue¶

THE outer corner treatment value for Flat as Solid operations

Signature SetOuterCornerTreatmentValue(updateModel, outerCornerTreatment)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately outerCornerTreatment (str) – default value for out corner treatment

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetSecondaryToolName¶

PartSheetmetal.SetSecondaryToolName¶

Signature SetSecondaryToolName(updateModel, secondaryToolName)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately secondaryToolName (str) – secondaryToolName

New in version NX12.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetStationaryRadius¶

PartSheetmetal.SetStationaryRadius¶

THE stationary radius

Signature SetStationaryRadius(updateModel, stationaryRadius)

Parameters:	updateModel (bool) – Specifies whether the solid model be updated immediately stationaryRadius (str) – default stationary radius for joggle

New in version NX11.0.0.

License requirements: adv_sheet_metal_dsgn (“ADVANCED SHEET METAL DESIGN”)

SetTabCurveTypeDisplayData¶

PartSheetmetal.SetTabCurveTypeDisplayData¶

Sets the display data for a given tab curve type.

Signature SetTabCurveTypeDisplayData(updateModel, curveType, displayData)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately. curveType (`NXOpen.Preferences.PartSheetmetalTabCurveType`) – The curve type for which to get the display data. displayData (`NXOpen.Preferences.PartSheetmetalTabCurveTypeDisplayData_Struct`) – The display data for the tab curve type.

New in version NX12.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetThickness¶

PartSheetmetal.SetThickness¶

THE thickness value string

Signature SetThickness(updateModel, thickness)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately thickness (str) – default thickness value for NX Sheetmetal solids

New in version NX4.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)

SetTool¶

PartSheetmetal.SetTool¶

The tool standard

Signature SetTool(updateModel, standardName)

Parameters:	updateModel (bool) – Specifies whether the solid model be recomputed immediately standardName (str) – The name of a tool from the material standards file

New in version NX6.0.0.

License requirements: nx_sheet_metal (“NX Sheet Metal”)