DieCavityAndSlugHoleBuilder Class

class NXOpen.Tooling.DieCavityAndSlugHoleBuilder

Bases: NXOpen.Builder

Represents die cavity and slug hole builder.

To create a new instance of this class, use NXOpen.Tooling.ProgressiveDieManager.CreateDieCavityAndSlugHoleBuilder()

Default values.

Property	Value
AngleDiePlateTwo	-0.25
DieInsertStack	One
DieOffsetValue	0
DiePlateThree	2
DiePlateTwo	1
DieSameOffsetValue	0
ForEachScrapDiePlateThree	1
ForEachScrapDiePlateTwo	1
NormalBottomBackPlateSlug	Fillet
NormalCavity	TaperAngle
NormalClearance	0.05
NormalClearanceOption	Constant
NormalDieShoeSlug	Fillet
NormalForEachScrap1	0
NormalForEachScrap2	0
NormalOffsetSide	DieSide
NormalRenameDialog	0
NormalSlugInDiePlateThree	Fillet
NormalSlugInDiePlateTwo	Fillet
NormalSlugParameter1	3
NormalSlugParameter2	-3
NormalSlugParameter3	2
NormalSlugParameter4	3
OffsetLinearDimension.Value	3 (millimeters part), 0.12 (inches part)
Position	Bottom
ShimHeight	0
ShimOffset	0
SlugHoleHeightLinearDimension.Value	100 (millimeters part), 4 (inches part)
SpacerAngle	0
SpacerOffset	0
WaferHeight	0

New in version NX11.0.0.

Properties

Property	Description
AngleDiePlateTwo	Returns or sets the angle of the die plate two
DieInsertStack	Returns or sets the die insert stack
DieOffsetValue	Returns or sets the die offset value
DiePlateThree	Returns or sets the die plate three
DiePlateTwo	Returns or sets the die plate two
DieSameOffsetValue	Returns or sets the die same offset value
ForEachScrapDiePlateThree	Returns or sets the result whether use same clearance for each scrap in die plate three
ForEachScrapDiePlateTwo	Returns or sets the for each scrap die plate two
NewPartNames	Returns or sets the new component names.
NormalBottomBackPlateSlug	Returns or sets the normal bbpslug
NormalCavity	Returns or sets the normal cavity
NormalClearance	Returns or sets the normal clearance
NormalClearanceOption	Returns or sets the normal clearance option
NormalDieShoeSlug	Returns or sets the normal dsslug
NormalForEachScrap1	Returns or sets the normal for each scrap1
NormalForEachScrap2	Returns or sets the normal for each scrap2
NormalOffsetSide	Returns or sets the normal offset side
NormalRenameDialog	Returns or sets the normal rename dialog
NormalSelectPierceDieInsert	Returns the normal select pierce die insert
NormalSlugInDiePlateThree	Returns or sets the normal slug in diePlateThree
NormalSlugInDiePlateTwo	Returns or sets the normal slug in die plate two
NormalSlugParameter1	Returns or sets the normal slug parameter1
NormalSlugParameter2	Returns or sets the normal slug parameter2
NormalSlugParameter3	Returns or sets the normal slug parameter3
NormalSlugParameter4	Returns or sets the normal slug parameter4
OffsetLinearDimension	Returns the offset linear dimension
ParentPartName	Returns or sets the parent part name to create insert.
Position	Returns or sets the position
SelectOffsetSpreadsheet	Returns or sets the super offset spreadsheet
SelectScrap	Returns the select scrap
SelectSketch	Returns the select sketch
ShimHeight	Returns or sets the shim height
ShimOffset	Returns or sets the shim offset
SlugHoleHeightLinearDimension	Returns the slug hole height linear dimension
SlugPreviousParameterA	Returns or sets the previous slug parameter A
SlugPreviousParameterC1	Returns or sets the previous slug parameter C1
SlugPreviousParameterC2	Returns or sets the previous slug parameter C2
SpacerAngle	Returns or sets the spacer angle
SpacerOffset	Returns or sets the spacer offset
Tag	Returns the Tag for this object.
WaferHeight	Returns or sets the wafer height

Methods

Method	Description
Commit	Commits any edits that have been applied to the builder.
Destroy	Deletes the builder, and cleans up any objects created by the builder.
DieEditOffsetValueTable	Edit offset value table for die
GetCommittedObjects	For builders that create more than one object, this method returns the objects that are created by commit.
GetObject	Returns the object currently being edited by this builder.
NormalCreateCavityAndSlug	Create normal cavity and slug
ShowResults	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations

DieCavityAndSlugHoleBuilderBottomPlateSlugItems Enumeration	Specifies the type of bottom plate slug.
DieCavityAndSlugHoleBuilderCavityTypeItems Enumeration	Specifies the type of cavity.
DieCavityAndSlugHoleBuilderClearanceOptionItems Enumeration	Specifies the design option of piercing insert.
DieCavityAndSlugHoleBuilderDieInsertStackType Enumeration	die insert stack type.
DieCavityAndSlugHoleBuilderDiePlateThreeSlugType Enumeration	die plate three slug type.
DieCavityAndSlugHoleBuilderDiePlateTwoSlugType Enumeration	die plate two slug type.
DieCavityAndSlugHoleBuilderDieShoeSlugTypeItems Enumeration	Specifies the type of die shoe slug.
DieCavityAndSlugHoleBuilderInsertPositionItems Enumeration	Specifies the position of piercing inserts, for EDW only
DieCavityAndSlugHoleBuilderOffsetSideOptionItems Enumeration	Specifies the offset side of normal pierce insert design.

Property Detail

AngleDiePlateTwo

DieCavityAndSlugHoleBuilder.AngleDiePlateTwo

Returns or sets the angle of the die plate two

-------------------------------------

Getter Method

Signature AngleDiePlateTwo

Returns: Return type:float

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AngleDiePlateTwo

Parameters:angleDiePlateTwo (float) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

DieInsertStack

DieCavityAndSlugHoleBuilder.DieInsertStack

Returns or sets the die insert stack

-------------------------------------

Getter Method

Signature DieInsertStack

Returns: Return type:NXOpen.Tooling.DieCavityAndSlugHoleBuilderDieInsertStackType

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DieInsertStack

Parameters:dieInsertStack (NXOpen.Tooling.DieCavityAndSlugHoleBuilderDieInsertStackType) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

DieOffsetValue

DieCavityAndSlugHoleBuilder.DieOffsetValue

Returns or sets the die offset value

-------------------------------------

Getter Method

Signature DieOffsetValue

Returns: Return type:float

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DieOffsetValue

Parameters:dieOffsetValue (float) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

DiePlateThree

DieCavityAndSlugHoleBuilder.DiePlateThree

Returns or sets the die plate three

-------------------------------------

Getter Method

Signature DiePlateThree

Returns: Return type:float

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DiePlateThree

Parameters:diePlateThree (float) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

DiePlateTwo

DieCavityAndSlugHoleBuilder.DiePlateTwo

Returns or sets the die plate two

-------------------------------------

Getter Method

Signature DiePlateTwo

Returns: Return type:float

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DiePlateTwo

Parameters:diePlateTwo (float) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

DieSameOffsetValue

DieCavityAndSlugHoleBuilder.DieSameOffsetValue

Returns or sets the die same offset value

-------------------------------------

Getter Method

Signature DieSameOffsetValue

Returns: Return type:bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DieSameOffsetValue

Parameters:dieSameOffsetValue (bool) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

ForEachScrapDiePlateThree

DieCavityAndSlugHoleBuilder.ForEachScrapDiePlateThree

Returns or sets the result whether use same clearance for each scrap in die plate three

-------------------------------------

Getter Method

Signature ForEachScrapDiePlateThree

Returns: Return type:bool

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ForEachScrapDiePlateThree

Parameters:forEachScrapDiePlateThree (bool) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

ForEachScrapDiePlateTwo

DieCavityAndSlugHoleBuilder.ForEachScrapDiePlateTwo

Returns or sets the for each scrap die plate two

-------------------------------------

Getter Method

Signature ForEachScrapDiePlateTwo

Returns: Return type:bool

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ForEachScrapDiePlateTwo

Parameters:forEachScrapDiePlateTwo (bool) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

NewPartNames

DieCavityAndSlugHoleBuilder.NewPartNames

Returns or sets the new component names.

-------------------------------------

Getter Method

Signature NewPartNames

Returns:Retruns the new component names Return type:str

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NewPartNames

Parameters:newPartNames (str) – Specifies the new component names

New in version NX11.0.0.

License requirements: None.

NormalBottomBackPlateSlug

DieCavityAndSlugHoleBuilder.NormalBottomBackPlateSlug

Returns or sets the normal bbpslug

-------------------------------------

Getter Method

Signature NormalBottomBackPlateSlug

Returns: Return type:NXOpen.Tooling.DieCavityAndSlugHoleBuilderBottomPlateSlugItems

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalBottomBackPlateSlug

Parameters:normalBottomBackPlateSlug (NXOpen.Tooling.DieCavityAndSlugHoleBuilderBottomPlateSlugItems) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalCavity

DieCavityAndSlugHoleBuilder.NormalCavity

Returns or sets the normal cavity

-------------------------------------

Getter Method

Signature NormalCavity

Returns: Return type:NXOpen.Tooling.DieCavityAndSlugHoleBuilderCavityTypeItems

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalCavity

Parameters:normalCavity (NXOpen.Tooling.DieCavityAndSlugHoleBuilderCavityTypeItems) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalClearance

DieCavityAndSlugHoleBuilder.NormalClearance

Returns or sets the normal clearance

-------------------------------------

Getter Method

Signature NormalClearance

Returns: Return type:float

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalClearance

Parameters:normalClearance (float) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalClearanceOption

DieCavityAndSlugHoleBuilder.NormalClearanceOption

Returns or sets the normal clearance option

-------------------------------------

Getter Method

Signature NormalClearanceOption

Returns: Return type:NXOpen.Tooling.DieCavityAndSlugHoleBuilderClearanceOptionItems

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalClearanceOption

Parameters:normalClearanceOption (NXOpen.Tooling.DieCavityAndSlugHoleBuilderClearanceOptionItems) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalDieShoeSlug

DieCavityAndSlugHoleBuilder.NormalDieShoeSlug

Returns or sets the normal dsslug

-------------------------------------

Getter Method

Signature NormalDieShoeSlug

Returns: Return type:NXOpen.Tooling.DieCavityAndSlugHoleBuilderDieShoeSlugTypeItems

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalDieShoeSlug

Parameters:normalDieShoeSlug (NXOpen.Tooling.DieCavityAndSlugHoleBuilderDieShoeSlugTypeItems) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalForEachScrap1

DieCavityAndSlugHoleBuilder.NormalForEachScrap1

Returns or sets the normal for each scrap1

-------------------------------------

Getter Method

Signature NormalForEachScrap1

Returns: Return type:bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalForEachScrap1

Parameters:normalForEachScrap1 (bool) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalForEachScrap2

DieCavityAndSlugHoleBuilder.NormalForEachScrap2

Returns or sets the normal for each scrap2

-------------------------------------

Getter Method

Signature NormalForEachScrap2

Returns: Return type:bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalForEachScrap2

Parameters:normalForEachScrap2 (bool) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalOffsetSide

DieCavityAndSlugHoleBuilder.NormalOffsetSide

Returns or sets the normal offset side

-------------------------------------

Getter Method

Signature NormalOffsetSide

Returns: Return type:NXOpen.Tooling.DieCavityAndSlugHoleBuilderOffsetSideOptionItems

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalOffsetSide

Parameters:normalOffsetSide (NXOpen.Tooling.DieCavityAndSlugHoleBuilderOffsetSideOptionItems) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalRenameDialog

DieCavityAndSlugHoleBuilder.NormalRenameDialog

Returns or sets the normal rename dialog

-------------------------------------

Getter Method

Signature NormalRenameDialog

Returns: Return type:bool

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalRenameDialog

Parameters:normalRenameDialog (bool) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalSelectPierceDieInsert

DieCavityAndSlugHoleBuilder.NormalSelectPierceDieInsert

Returns the normal select pierce die insert

-------------------------------------

Getter Method

Signature NormalSelectPierceDieInsert

Returns: Return type:NXOpen.SelectBodyList

New in version NX11.0.0.

License requirements: None.

NormalSlugInDiePlateThree

DieCavityAndSlugHoleBuilder.NormalSlugInDiePlateThree

Returns or sets the normal slug in diePlateThree

-------------------------------------

Getter Method

Signature NormalSlugInDiePlateThree

Returns: Return type:NXOpen.Tooling.DieCavityAndSlugHoleBuilderDiePlateThreeSlugType

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalSlugInDiePlateThree

Parameters:normalSlugInDiePlateThree (NXOpen.Tooling.DieCavityAndSlugHoleBuilderDiePlateThreeSlugType) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

NormalSlugInDiePlateTwo

DieCavityAndSlugHoleBuilder.NormalSlugInDiePlateTwo

Returns or sets the normal slug in die plate two

-------------------------------------

Getter Method

Signature NormalSlugInDiePlateTwo

Returns: Return type:NXOpen.Tooling.DieCavityAndSlugHoleBuilderDiePlateTwoSlugType

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalSlugInDiePlateTwo

Parameters:normalSlugInDiePlateTwo (NXOpen.Tooling.DieCavityAndSlugHoleBuilderDiePlateTwoSlugType) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

NormalSlugParameter1

DieCavityAndSlugHoleBuilder.NormalSlugParameter1

Returns or sets the normal slug parameter1

-------------------------------------

Getter Method

Signature NormalSlugParameter1

Returns: Return type:float

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalSlugParameter1

Parameters:normalSlugParameter1 (float) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalSlugParameter2

DieCavityAndSlugHoleBuilder.NormalSlugParameter2

Returns or sets the normal slug parameter2

-------------------------------------

Getter Method

Signature NormalSlugParameter2

Returns: Return type:float

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalSlugParameter2

Parameters:normalSlugParameter2 (float) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalSlugParameter3

DieCavityAndSlugHoleBuilder.NormalSlugParameter3

Returns or sets the normal slug parameter3

-------------------------------------

Getter Method

Signature NormalSlugParameter3

Returns: Return type:float

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalSlugParameter3

Parameters:normalSlugParameter3 (float) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalSlugParameter4

DieCavityAndSlugHoleBuilder.NormalSlugParameter4

Returns or sets the normal slug parameter4

-------------------------------------

Getter Method

Signature NormalSlugParameter4

Returns: Return type:float

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature NormalSlugParameter4

Parameters:normalSlugParameter4 (float) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

OffsetLinearDimension

DieCavityAndSlugHoleBuilder.OffsetLinearDimension

Returns the offset linear dimension

-------------------------------------

Getter Method

Signature OffsetLinearDimension

Returns: Return type:NXOpen.Expression

New in version NX11.0.0.

License requirements: None.

ParentPartName

DieCavityAndSlugHoleBuilder.ParentPartName

Returns or sets the parent part name to create insert.

-------------------------------------

Getter Method

Signature ParentPartName

Returns:Retruns parent part name Return type:str

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ParentPartName

Parameters:parentPartName (str) – Specifies the parent part name

New in version NX11.0.0.

License requirements: None.

Position

DieCavityAndSlugHoleBuilder.Position

Returns or sets the position

-------------------------------------

Getter Method

Signature Position

Returns: Return type:NXOpen.Tooling.DieCavityAndSlugHoleBuilderInsertPositionItems

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature Position

Parameters:position (NXOpen.Tooling.DieCavityAndSlugHoleBuilderInsertPositionItems) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

SelectOffsetSpreadsheet

DieCavityAndSlugHoleBuilder.SelectOffsetSpreadsheet

Returns or sets the super offset spreadsheet

-------------------------------------

Getter Method

Signature SelectOffsetSpreadsheet

Returns: Return type:str

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SelectOffsetSpreadsheet

Parameters:filename (str) –

New in version NX11.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

SelectScrap

DieCavityAndSlugHoleBuilder.SelectScrap

Returns the select scrap

-------------------------------------

Getter Method

Signature SelectScrap

Returns: Return type:NXOpen.SelectBodyList

New in version NX11.0.0.

License requirements: None.

SelectSketch

DieCavityAndSlugHoleBuilder.SelectSketch

Returns the select sketch

-------------------------------------

Getter Method

Signature SelectSketch

Returns: Return type:NXOpen.SelectSketch

New in version NX11.0.0.

License requirements: None.

ShimHeight

DieCavityAndSlugHoleBuilder.ShimHeight

Returns or sets the shim height

-------------------------------------

Getter Method

Signature ShimHeight

Returns: Return type:float

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ShimHeight

Parameters:shimHeight (float) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

ShimOffset

DieCavityAndSlugHoleBuilder.ShimOffset

Returns or sets the shim offset

-------------------------------------

Getter Method

Signature ShimOffset

Returns: Return type:float

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ShimOffset

Parameters:shimOffset (float) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

SlugHoleHeightLinearDimension

DieCavityAndSlugHoleBuilder.SlugHoleHeightLinearDimension

Returns the slug hole height linear dimension

-------------------------------------

Getter Method

Signature SlugHoleHeightLinearDimension

Returns: Return type:NXOpen.Expression

New in version NX11.0.0.

License requirements: None.

SlugPreviousParameterA

DieCavityAndSlugHoleBuilder.SlugPreviousParameterA

Returns or sets the previous slug parameter A

-------------------------------------

Getter Method

Signature SlugPreviousParameterA

Returns: Return type:float

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SlugPreviousParameterA

Parameters:slugPreviousParameterA (float) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

SlugPreviousParameterC1

DieCavityAndSlugHoleBuilder.SlugPreviousParameterC1

Returns or sets the previous slug parameter C1

-------------------------------------

Getter Method

Signature SlugPreviousParameterC1

Returns: Return type:float

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SlugPreviousParameterC1

Parameters:slugPreviousParameterC1 (float) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

SlugPreviousParameterC2

DieCavityAndSlugHoleBuilder.SlugPreviousParameterC2

Returns or sets the previous slug parameter C2

-------------------------------------

Getter Method

Signature SlugPreviousParameterC2

Returns: Return type:float

New in version NX11.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SlugPreviousParameterC2

Parameters:slugPreviousParameterC2 (float) –

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

SpacerAngle

DieCavityAndSlugHoleBuilder.SpacerAngle

Returns or sets the spacer angle

-------------------------------------

Getter Method

Signature SpacerAngle

Returns: Return type:float

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SpacerAngle

Parameters:spacerAngle (float) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

SpacerOffset

DieCavityAndSlugHoleBuilder.SpacerOffset

Returns or sets the spacer offset

-------------------------------------

Getter Method

Signature SpacerOffset

Returns: Return type:float

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature SpacerOffset

Parameters:spacerOffset (float) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

WaferHeight

DieCavityAndSlugHoleBuilder.WaferHeight

Returns or sets the wafer height

-------------------------------------

Getter Method

Signature WaferHeight

Returns: Return type:float

New in version NX12.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature WaferHeight

Parameters:waferHeight (float) –

New in version NX12.0.0.

License requirements: prog_die_wizard (“UG/Progressive Die Wizard”)

Method Detail

DieEditOffsetValueTable

DieCavityAndSlugHoleBuilder.DieEditOffsetValueTable

Edit offset value table for die

Signature DieEditOffsetValueTable()

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

NormalCreateCavityAndSlug

DieCavityAndSlugHoleBuilder.NormalCreateCavityAndSlug

Create normal cavity and slug

Signature NormalCreateCavityAndSlug()

New in version NX11.0.0.

License requirements: ug_mold_design (“UG MOLD”) OR prog_die_wizard (“UG/Progressive Die Wizard”)

Validate

DieCavityAndSlugHoleBuilder.Validate

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:Was self validation successful Return type:bool

New in version NX3.0.1.

License requirements: None.