Tutorial6 << Previous Next >> Stream

Tutorial7

Tutorial 7: Your First PROTO

The aim of this tutorial is to create a PROTO file corresponding to the four wheels robot from the previous tutorial.

Copy the Robot Definition

For now, the definition of the robot is completely contained in the world file. Moving this definition in a PROTO file will allow you to use this robot without the need to completely copy and paste its definition (either several times in the same world or in different worlds).

Hands-on #1: Open the world 4_wheels_robot.wbt created in the previous tutorial in your favorite text editor. Create a new empty text file in the protos folder of your project called FourWheelsRobot.proto and open this file in the text editor too, this file will contain the definition of your robot.

Any PROTO file should at least respect the following structure:

#VRML_SIM R2025a utf8
PROTO protoName [
  protoFields
]
{
  protoBody
}

The protoName should be the name of the PROTO file (i.e. FourWheelsRobot in this case), protoFields defines the modifiable fields of the PROTO node (this part should be empty for now) and the protoBody is the definition of the root node (i.e. the Robot node in this case).

Hands-on #2: Write this default structure in your PROTO file with the correct protoName. From the 4_wheels_robot.wbt world file copy the robot node (starting with Robot { and ending with the final }) and paste it in your PROTO file instead of the protoBody. Finally, save the PROTO file.

Solution: You should have something like this:

#VRML_SIM R2025a utf8
  PROTO FourWheelsRobot [

  ]
  {
    Robot {
      # list of fields
    }
  }

Use the PROTO Node.

This new PROTO node is now available for each world in your current project.

Hands-on #3: Open the 4_wheels_robot.wbt world in Webots and add the FourWheelsRobot node (that you just defined). The node is located in PROTO nodes (Current Project) / FourWheelsRobot (Robot).

A second 4 wheels robot should have been added at the exact same location as the already existing one.

Adding Fields

As you probably noticed, this new PROTO node doesn't have any open field, it is therefore impossible to translate, rotate or change the controller for example. It is very easy to add new fields to a PROTO node and to link them with internal fields. This should be done in the PROTO interface part (part between the [ and the ]).

Hands-on #4: Edit your PROTO file in your text editor and add the definition of the translation, rotation and bodyMass field in the PROTO interface part:

  field SFVec3f    translation  0 0 0
  field SFRotation rotation     0 0 1 0
  field SFFloat    bodyMass     1

Your PROTO node has now two open fields but they are not linked to any internal field. To link the fields you should use the IS keyword, simply replace the translation x y z and rotation x y z angle fields of the Robot node by:

  translation IS translation
  rotation IS rotation

And the mass field of the Physics node of the Robot node by:

  mass IS bodyMass

Save your PROTO file, it should now look like this:

#VRML_SIM R2025a utf8
PROTO FourWheelsRobot [
  field SFVec3f    translation  0 0 0
  field SFRotation rotation     0 0 1 0
  field SFFloat    bodyMass     1
]
{
  Robot {
    translation IS translation
    rotation IS rotation
    children [
      # list of children nodes
    ]
    boundingObject USE BODY
    physics Physics {
      density -1
      mass IS bodyMass
    }
    controller "four_wheels_collision_avoidance"
  }
}

You can now save your simulation in Webots and revert it. The translation, rotation and bodyMass of the FourWheelsRobot node can now be changed (either in the scene tree or using the handles in the 3D view).

The same mechanism could also be used to expose the controller field of the Robot node.

Solution: PROTO File

To compare your PROTO file with the solution, go to your files and find the folder named "my_first_simulation" created in Tutorial 1, then go to the "protos" folder and open with a text editor the right PROTO.

Conclusion

You are now able to create PROTO nodes from any nodes you created in Webots.

More specifically, you learnt how to copy the node definition in the PROTO file and how to open and link PROTO fields to internal node fields.

To go further, the PROTO chapter of the reference manual explains in detail all the possibilities of the PROTO mechanism.

Tutorial6 << Previous Next >> Stream